Re: [RESEND v4 09/15] iio: adc: aspeed: Use devm_add_action_or_reset.

[Jonathan Cameron]

On Tue, 24 Aug 2021 17:12:37 +0800
Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> wrote:

> This patch use devm_add_action_or_reset to handle the error in probe
> phase.
> 
> Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx>
> ---
>  drivers/iio/adc/aspeed_adc.c | 92 +++++++++++++++++++++---------------
>  1 file changed, 55 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c
> index 52db38be9699..1c87e12a0cab 100644
> --- a/drivers/iio/adc/aspeed_adc.c
> +++ b/drivers/iio/adc/aspeed_adc.c
> @@ -187,6 +187,27 @@ static const struct iio_info aspeed_adc_iio_info = {
>  	.debugfs_reg_access = aspeed_adc_reg_access,
>  };
>  
> +static void aspeed_adc_unregister_divider(void *data)
> +{
> +	struct clk_hw *clk = data;
> +
> +	clk_hw_unregister_divider(clk);
> +}
> +
> +static void aspeed_adc_reset_assert(void *data)
> +{
> +	struct reset_control *rst = data;
> +
> +	reset_control_assert(rst);
> +}
> +
> +static void aspeed_adc_clk_disable_unprepare(void *data)
> +{
> +	struct clk *clk = data;
> +
> +	clk_disable_unprepare(clk);
> +}
> +
>  static int aspeed_adc_vref_config(struct iio_dev *indio_dev)
>  {
>  	struct aspeed_adc_data *data = iio_priv(indio_dev);
> @@ -232,6 +253,12 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  			&data->clk_lock);
>  		if (IS_ERR(data->clk_prescaler))
>  			return PTR_ERR(data->clk_prescaler);
> +
> +		ret = devm_add_action_or_reset(data->dev,
> +					       aspeed_adc_unregister_divider,
> +					       data->clk_prescaler);
> +		if (ret)
> +			return ret;
>  		snprintf(clk_parent_name, 32, clk_name);
>  		scaler_flags = CLK_SET_RATE_PARENT;
>  	}
> @@ -244,23 +271,30 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  		&pdev->dev, clk_name, clk_parent_name, scaler_flags,
>  		data->base + ASPEED_REG_CLOCK_CONTROL, 0,
>  		data->model_data->scaler_bit_width, 0, &data->clk_lock);
> -	if (IS_ERR(data->clk_scaler)) {
> -		ret = PTR_ERR(data->clk_scaler);
> -		goto scaler_error;
> -	}
> +	if (IS_ERR(data->clk_scaler))
> +		return PTR_ERR(data->clk_scaler);
> +
> +	ret = devm_add_action_or_reset(data->dev, aspeed_adc_unregister_divider,
> +				       data->clk_scaler);
> +	if (ret)
> +		return ret;
>  
>  	data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
>  	if (IS_ERR(data->rst)) {
>  		dev_err(&pdev->dev,
>  			"invalid or missing reset controller device tree entry");
> -		ret = PTR_ERR(data->rst);
> -		goto reset_error;
> +		return PTR_ERR(data->rst);
>  	}
>  	reset_control_deassert(data->rst);
>  
> +	ret = devm_add_action_or_reset(data->dev, aspeed_adc_reset_assert,
> +				       data->rst);
> +	if (ret)
> +		return ret;
> +
>  	ret = aspeed_adc_vref_config(indio_dev);
>  	if (ret)
> -		goto vref_config_error;
> +		return ret;
>  
>  	if (data->model_data->wait_init_sequence) {
>  		/* Enable engine in normal mode. */
> @@ -277,13 +311,19 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  					 ASPEED_ADC_INIT_POLLING_TIME,
>  					 ASPEED_ADC_INIT_TIMEOUT);
>  		if (ret)
> -			goto poll_timeout_error;
> +			return ret;
>  	}
>  
>  	/* Start all channels in normal mode. */
>  	ret = clk_prepare_enable(data->clk_scaler->clk);
>  	if (ret)
> -		goto clk_enable_error;
> +		return ret;
> +
> +	ret = devm_add_action_or_reset(data->dev,
> +				       aspeed_adc_clk_disable_unprepare,
> +				       data->clk_scaler->clk);
> +	if (ret)
> +		return ret;
>  
>  	adc_engine_control_reg_val =
>  		ASPEED_ADC_CTRL_CHANNEL |
> @@ -299,41 +339,19 @@ static int aspeed_adc_probe(struct platform_device *pdev)
>  	indio_dev->num_channels = data->model_data->num_channels;
>  
>  	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto iio_register_error;
> -
> +	if (ret) {
> +		writel(FIELD_PREP(ASPEED_ADC_OP_MODE,
> +				  ASPEED_ADC_OP_MODE_PWR_DOWN),
> +		       data->base + ASPEED_REG_ENGINE_CONTROL);
> +		return ret;
> +	}
>  	return 0;
> -
> -iio_register_error:
> -	writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
> -	       data->base + ASPEED_REG_ENGINE_CONTROL);
> -	clk_disable_unprepare(data->clk_scaler->clk);
> -clk_enable_error:
> -poll_timeout_error:
> -vref_config_error:
> -	reset_control_assert(data->rst);
> -reset_error:
> -	clk_hw_unregister_divider(data->clk_scaler);
> -scaler_error:
> -	if (data->model_data->need_prescaler)
> -		clk_hw_unregister_divider(data->clk_prescaler);
> -	return ret;
>  }
>  
>  static int aspeed_adc_remove(struct platform_device *pdev)
>  {
>  	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> -	struct aspeed_adc_data *data = iio_priv(indio_dev);
> -
>  	iio_device_unregister(indio_dev);

Given there is no longer anything here, you should be safe to call
devm_iio_device_unregister() and get rid of this function entirely.


> -	writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN),
> -	       data->base + ASPEED_REG_ENGINE_CONTROL);

Unless I'm missing something this is not handled via any of the
devm_add_action_or_reset() callbacks. You handle it in the error paths manually
but if you move this to managed as well you can drop that handling and still
have it automatically called on remove.


> -	clk_disable_unprepare(data->clk_scaler->clk);
> -	reset_control_assert(data->rst);
> -	clk_hw_unregister_divider(data->clk_scaler);
> -	if (data->model_data->need_prescaler)
> -		clk_hw_unregister_divider(data->clk_prescaler);
> -
>  	return 0;
>  }
>