[PATCH v7 6/8] arm64: dts: qcom: sm8250: remove mmcx regulator

[Dmitry Baryshkov]

Switch dispcc and videocc into using MMCX domain directly. Drop the now
unused mmcx regulator.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 4798368b02ef..0d35449fda02 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -273,13 +273,6 @@ memory@80000000 {
 		reg = <0x0 0x80000000 0x0 0x0>;
 	};
 
-	mmcx_reg: mmcx-reg {
-		compatible = "regulator-fixed-domain";
-		power-domains = <&rpmhpd SM8250_MMCX>;
-		required-opps = <&rpmhpd_opp_low_svs>;
-		regulator-name = "MMCX";
-	};
-
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
@@ -2451,7 +2444,8 @@ videocc: clock-controller@abf0000 {
 			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>;
-			mmcx-supply = <&mmcx_reg>;
+			power-domains = <&rpmhpd SM8250_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			clock-names = "iface", "bi_tcxo", "bi_tcxo_ao";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -2720,7 +2714,8 @@ opp-358000000 {
 		dispcc: clock-controller@af00000 {
 			compatible = "qcom,sm8250-dispcc";
 			reg = <0 0x0af00000 0 0x10000>;
-			mmcx-supply = <&mmcx_reg>;
+			power-domains = <&rpmhpd SM8250_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&dsi0_phy 0>,
 				 <&dsi0_phy 1>,
-- 
2.33.0