Re: [PATCH] iio: adc: twl6030-gpadc: Use the defined variable to clean code

[Jonathan Cameron]

On Mon, 23 Aug 2021 17:59:21 +0800
Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx> wrote:

> Use the defined variable "dev" to make the code cleaner.
> 
> Signed-off-by: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
Applied.

Thanks,

> ---
>  drivers/iio/adc/twl6030-gpadc.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/iio/adc/twl6030-gpadc.c b/drivers/iio/adc/twl6030-gpadc.c
> index 0859f3f7d..5e4fbb033 100644
> --- a/drivers/iio/adc/twl6030-gpadc.c
> +++ b/drivers/iio/adc/twl6030-gpadc.c
> @@ -897,7 +897,7 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
>  
>  	ret = pdata->calibrate(gpadc);
>  	if (ret < 0) {
> -		dev_err(&pdev->dev, "failed to read calibration registers\n");
> +		dev_err(dev, "failed to read calibration registers\n");
>  		return ret;
>  	}
>  
> @@ -911,14 +911,14 @@ static int twl6030_gpadc_probe(struct platform_device *pdev)
>  
>  	ret = twl6030_gpadc_enable_irq(TWL6030_GPADC_RT_SW1_EOC_MASK);
>  	if (ret < 0) {
> -		dev_err(&pdev->dev, "failed to enable GPADC interrupt\n");
> +		dev_err(dev, "failed to enable GPADC interrupt\n");
>  		return ret;
>  	}
>  
>  	ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCS,
>  					TWL6030_REG_TOGGLE1);
>  	if (ret < 0) {
> -		dev_err(&pdev->dev, "failed to enable GPADC module\n");
> +		dev_err(dev, "failed to enable GPADC module\n");
>  		return ret;
>  	}
>