Re: [PATCH v2 1/2] drm/msm/dsi: Use "ref" fw clock instead of global name for VCO parent

[Marijn Suijten]

Hi Stephen,

On 2021-08-30 15:16:13, Stephen Boyd wrote:
> Quoting Marijn Suijten (2021-08-30 11:24:44)
> > All DSI PHY/PLL drivers were referencing their VCO parent clock by a
> > global name, most of which don't exist or have been renamed.  These
> > clock drivers seem to function fine without that except the 14nm driver
> > for the sdm6xx [1].
> > 
> > At the same time all DTs provide a "ref" clock as per the requirements
> > of dsi-phy-common.yaml, but the clock is never used.  This patchset puts
> > that clock to use without relying on a global clock name, so that all
> > dependencies are explicitly defined in DT (the firmware) in the end.
> > 
> > Note that msm8974 is the only board not providing this clock, and
> > apq8064 was providing the wrong clock (19.2MHz cxo instead of 27MHz
> > pxo).  Both have been been addressed in separate patches that are
> > supposed to land well in advance of this patchset.
> > 
> > Furthermore not all board-DTs provided this clock initially but that
> > deficiency has been addressed in followup patches (see the Fixes:
> > below).  Those commits seem to assume that the clock was used, while
> > nothing in history indicates that this "ref" clock was ever retrieved.
> > 
> > [1]: https://lore.kernel.org/linux-arm-msm/386db1a6-a1cd-3c7d-a88e-dc83f8a1be96@xxxxxxxxxxxxxx/
> > 
> > Fixes: 79e51645a1dd ("arm64: dts: qcom: msm8916: Set 'xo_board' as ref clock of the DSI PHY")
> > Fixes: 6969d1d9c615 ("ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY")
> > Fixes: 0c0e72705a33 ("arm64: dts: sdm845: Set 'bi_tcxo' as ref clock of the DSI PHYs")
> > Signed-off-by: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
> > ---
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c      | 4 +++-
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_14nm.c      | 4 +++-
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm.c      | 4 +++-
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_28nm_8960.c | 4 +++-
> >  drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c       | 4 +++-
> >  5 files changed, 15 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > index e46b10fc793a..3cbb1f1475e8 100644
> > --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c
> > @@ -562,7 +562,9 @@ static int pll_10nm_register(struct dsi_pll_10nm *pll_10nm, struct clk_hw **prov
> >         char clk_name[32], parent[32], vco_name[32];
> >         char parent2[32], parent3[32], parent4[32];
> >         struct clk_init_data vco_init = {
> > -               .parent_names = (const char *[]){ "xo" },
> > +               .parent_data = &(const struct clk_parent_data) {
> > +                       .fw_name = "ref",
> 
> Please also add .name as the old parent_names value so that newer
> kernels can be used without having to use new DT.

We discussed that only msm8974 misses this "ref" clock at the time of
writing.  Aforementioned Fixes: patches have all been merged about 3
years ago, are those DTs still in use with a newer kernel?  I suppose
this patch is only backported to kernels including those DT patches, is
it reasonable to assume that at least that DT is in use there?

Besides, not all clock trees provide this global "xo" or "bi_tcxo" clock
in the first place.

- Marijn

> > +               },
> >                 .num_parents = 1,
> >                 .name = vco_name,
> >                 .flags = CLK_IGNORE_UNUSED,