[PATCH 7/7] arm64: dts: ls1028a: use phy-mode instead of phy-connection-type

[Michael Walle]

In linux both are identical, phy-mode is used more often, though. Also
for the ls1028a both phy-connection-type and phy-mode was used, one for
the enetc nodes and the other for the switch nodes. Unify them. But the
main reason for this is that the device tree files can be shared with
the u-boot ones; there the enetc driver only supports the "phy-mode"
property.

Suggested-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts      | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts               | 2 +-
 arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts               | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
index 836a9b7d8263..7cd29ab970d9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts
@@ -54,6 +54,6 @@ &enetc_port0 {
 
 &enetc_port1 {
 	phy-handle = <&phy0>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
index 77ed0ebd2c75..9b5e92fb753e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts
@@ -42,6 +42,6 @@ vddh: vddh-regulator {
 
 &enetc_port1 {
 	phy-handle = <&phy1>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
index b3e9c499e8b0..d74e738e4070 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts
@@ -90,7 +90,7 @@ phy0: ethernet-phy@5 {
 
 &enetc_port0 {
 	phy-handle = <&phy0>;
-	phy-connection-type = "sgmii";
+	phy-mode = "sgmii";
 	managed = "in-band-status";
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index f36f87858aef..6e2a1da662fb 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -320,7 +320,7 @@ mux: mux-controller {
 
 &enetc_port1 {
 	phy-handle = <&qds_phy1>;
-	phy-connection-type = "rgmii-id";
+	phy-mode = "rgmii-id";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index ea11b1eb01f8..7719f44bcaed 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -221,7 +221,7 @@ qsgmii_phy3: ethernet-phy@13 {
 
 &enetc_port0 {
 	phy-handle = <&sgmii_phy0>;
-	phy-connection-type = "sgmii";
+	phy-mode = "sgmii";
 	managed = "in-band-status";
 	status = "okay";
 };
-- 
2.30.2