Re: [PATCH v3 0/4] mmc: pwrseq: sd8787: add support wilc1000 devices

[Nicolas Ferre]

On 24/08/2021 at 16:56, Ulf Hansson wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On Fri, 20 Aug 2021 at 11:30, Claudiu Beznea
> <claudiu.beznea@xxxxxxxxxxxxx> wrote:
> > Hi,
> >
> > This series adds support for WILC1000 devices on pwrseq-sd8787 driver.
> > WILC1000 devices needs a minimum delay of 5ms b/w reset and power lines.
> > Adapt the sd8787 driver for this by adding a new compatible for WILC1000
> > devices and specify the delay on .data field of struct of_device_id.
> >
> > Thank you,
> > Claudiu Beznea
> >
> > Changes in v3:
> > - fixed dt binding compilation
> >
> > Changes in v2:
> > - changed cover letter title (it was: mmc: pwrseq: sd8787: add support
> >    for selectable)
> > - use new compatible in pwrseq-sd8787 driver instead of adding a new
> >    binding for specifying the delay; with this, the patch 1/1 from v1 is
> >    not necessary
> > - adapt patch 3/3 from this version with the new compatible
> >
> >
> > Claudiu Beznea (3):
> >    dt-bindings: pwrseq-sd8787: add binding for wilc1000
> >    mmc: pwrseq: sd8787: add support for wilc1000
> >    mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787
> >
> > Eugen Hristev (1):
> >    ARM: dts: at91: sama5d27_wlsom1: add wifi device
> >
> >   .../bindings/mmc/mmc-pwrseq-sd8787.yaml       |  4 +-
> >   arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi   | 71 +++++++++++++++++++
> >   drivers/mmc/core/Kconfig                      |  2 +-
> >   drivers/mmc/core/pwrseq_sd8787.c              | 11 ++-
> >   4 files changed, 84 insertions(+), 4 deletions(-)
>
> Applied patch1 -> patch3, thanks! I leave patch 4 for soc maintainers.

Perfect, we take care of patch 4 through at91 -> arm-soc trees for 5.16 
kernel timeframe.

Best regards,
  Nicolas


--
Nicolas Ferre