Re: [PATCH v2 11/29] iommu/mediatek: Always pm_runtime_get while tlb flush

[Yong Wu (吴勇)]

On Tue, 2021-08-24 at 15:10 +0800, Hsin-Yi Wang wrote:
> On Fri, Aug 13, 2021 at 2:57 PM Yong Wu <yong.wu@xxxxxxxxxxxx> wrote:
> > 
> > Prepare for 2 HWs that sharing pgtable in different power-domains.
> > 
> > The previous SoC don't have PM. Only mt8192 has power-domain,
> > and it is display's power-domain which nearly always is enabled.
> > 
> > When there are 2 M4U HWs, it may has problem.
> > In this function, we get the pm_status via the m4u dev, but it
> > don't
> > reflect the real power-domain status of the HW since there may be
> > other
> > HW also use that power-domain.
> > 
> > Currently we could not get the real power-domain status, thus
> > always
> > pm_runtime_get here.
> > 
> > Prepare for mt8195, thus, no need fix tags here.
> > 
> > This patch may drop the performance, we expect the user could
> > pm_runtime_get_sync before dma_alloc_attrs which need tlb ops.
> 
> Can you check if there are existing users that need to add this
> change?

The issue may exist in our most users. Our users mainly are in v4l2.
normally their flow like this:
a) VIDIOC_REQBUFS: call dma_alloc_attrs or dma_buf_map_attachment.
b) VIDIOC_STREAMON. 
c) VIDIOC_QBUF: device_run: pm_runtime_get_sync.

Requesting they call pm_runtime_get before dma_alloc_attrs looks not
reasonable. It seems that they should not care about this.

This patch mainly make sure the flow is right. Locally I have a TODO to
try get the real power-domain status here, the sample code like below:

static struct notifier_block mtk_penpd_notifier;

/* Register the genpd notifier. */
mtk_penpd_notifier.notifier_call = mtk_iommu_pd_callback;
ret = dev_pm_genpd_add_notifier(dev, &mtk_penpd_notifier);

/* Then get the real power domain status in the notifier */
 static int mtk_iommu_pd_callback(struct notifier_block *nb,
                        unsigned long flags, void *data) 
 {
       if (flags == GENPD_NOTIFY_ON)
           /* the real power domain is power on */
       else if (flags == GENPD_NOTIFY_PRE_OFF)
           /* the real power domain are going to power off. Take it as
power off.
            * Skip the tlb ops after receivice this flag.
            */
 }
 
 How about this? or any other suggestion to get the real power-domain
rather than the iommu device's power domain status.
 Thanks.

> 
> 
> > 
> > Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> > ---
> 
> <snip>