Re: [PATCH V3] mtd: rawnand: qcom: Update code word value for raw read

[Miquel Raynal]

Md Sadre Alam <mdalam@xxxxxxxxxxxxxx> wrote on Wed,  1 Sep 2021
16:23:33 +0530:

> Fixes: 503ee5aa ("mtd: rawnand: qcom: update last code word register")
> Cc: stable@xxxxxxxxxx
> Signed-off-by: Md Sadre Alam <mdalam@xxxxxxxxxxxxxx>
> ---
> [V3]
>  * Added Fixes tag
>  * Removed change log from commit message.
> 
>     From QPIC V2 onwards there is a separate register to read
>     last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
> 
>     qcom_nandc_read_cw_raw() is used to read only one code word
>     at a time. If we will configure number of code words to 1 in
>     in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks
>     its reading the last code word, since from QPIC V2 onwards
>     we are having separate register to read the last code word,
>     we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n"
>     register to fetch data from controller buffer to system
>     memory.

Really?

It's not your first contribution, you know what a changelog is and what
a commit message is, right? So please, keep the commit message
("why" your change is needed) where it was and only put
the changelog (the differences between two versions) below the three
dashes '---'.

>  
>  drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index ef0bade..04e6f7b 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	struct nand_ecc_ctrl *ecc = &chip->ecc;
>  	int data_size1, data_size2, oob_size1, oob_size2;
>  	int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
> +	int raw_cw = cw;
>  
>  	nand_read_page_op(chip, page, 0, NULL, 0);
>  	host->use_ecc = false;
>  
> +	if (nandc->props->qpic_v2)
> +		raw_cw = ecc->steps - 1;
> +
>  	clear_bam_transaction(nandc);
>  	set_address(host, host->cw_size * cw, page);
> -	update_rw_regs(host, 1, true, cw);
> +	update_rw_regs(host, 1, true, raw_cw);
>  	config_nand_page_read(chip);
>  
>  	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
> @@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
>  	}
>  
> -	config_nand_cw_read(chip, false, cw);
> +	config_nand_cw_read(chip, false, raw_cw);
>  
>  	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
>  	reg_off += data_size1;