[PATCH 5/5] arm64: dts: msm8998: Configure Adreno GPU and related IOMMU
From: AngeloGioacchino Del Regno
Date: Wed Sep 01 2021 - 14:31:42 EST
The MSM8998 SoC includes an Adreno 540.1 GPU, with a maximum frequency
of 710MHz. This GPU may or may not accept a ZAP shader, depending on
platform configuration, so adding a zap-shader node is left to the
board DT.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 97 +++++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 221dc61ca5e3..0103fc1dfcfc 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1421,6 +1421,103 @@ glink-edge {
};
};
+ adreno_gpu: gpu@5000000 {
+ compatible = "qcom,adreno-540.1", "qcom,adreno";
+ reg = <0x05000000 0x40000>;
+ reg-names = "kgsl_3d0_reg_memory";
+
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&gpucc RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_GPU_BIMC_GFX_CLK>,
+ <&gpucc RBCPR_CLK>,
+ <&gpucc GFX3D_CLK>;
+ clock-names = "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface",
+ "rbcpr",
+ "core";
+
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
+ iommus = <&adreno_smmu 0>;
+ operating-points-v2 = <&gpu_opp_table>;
+ power-domains = <&rpmpd MSM8998_VDDMX>;
+ #stream-id-cells = <16>;
+ status = "disabled";
+
+ gpu_opp_table: opp-table {
+ compatible = "operating-points-v2";
+ opp-710000097 {
+ opp-hz = /bits/ 64 <710000097>;
+ opp-level = <RPM_SMD_LEVEL_TURBO>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-670000048 {
+ opp-hz = /bits/ 64 <670000048>;
+ opp-level = <RPM_SMD_LEVEL_NOM_PLUS>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-596000097 {
+ opp-hz = /bits/ 64 <596000097>;
+ opp-level = <RPM_SMD_LEVEL_NOM>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-515000097 {
+ opp-hz = /bits/ 64 <515000097>;
+ opp-level = <RPM_SMD_LEVEL_SVS_PLUS>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-414000000 {
+ opp-hz = /bits/ 64 <414000000>;
+ opp-level = <RPM_SMD_LEVEL_SVS>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-342000000 {
+ opp-hz = /bits/ 64 <342000000>;
+ opp-level = <RPM_SMD_LEVEL_LOW_SVS>;
+ opp-supported-hw = <0xFF>;
+ };
+
+ opp-257000000 {
+ opp-hz = /bits/ 64 <257000000>;
+ opp-level = <RPM_SMD_LEVEL_MIN_SVS>;
+ opp-supported-hw = <0xFF>;
+ };
+ };
+ };
+
+ adreno_smmu: iommu@5040000 {
+ compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2";
+ reg = <0x05040000 0x10000>;
+ clocks = <&gcc GCC_GPU_CFG_AHB_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_GPU_BIMC_GFX_CLK>;
+ clock-names = "iface", "mem", "mem_iface";
+
+ #global-interrupts = <0>;
+ #iommu-cells = <1>;
+ interrupts =
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
+ /*
+ * GPU-GX GDSC's parent is GPU-CX. We need to bring up the
+ * GPU-CX for SMMU but we need both of them up for Adreno.
+ * Contemporarily, we also need to manage the VDDMX rpmpd
+ * domain in the Adreno driver.
+ * Enable GPU CX/GX GDSCs here so that we can manage the
+ * SoC VDDMX RPM Power Domain in the Adreno driver.
+ */
+ power-domains = <&gpucc GPU_GX_GDSC>;
+ status = "disabled";
+ };
+
gpucc: clock-controller@5065000 {
compatible = "qcom,msm8998-gpucc";
#clock-cells = <1>;
--
2.32.0