RE: [PATCH v2 2/3] soc: aspeed: Add LPC UART routing support

From: ChiaWei Wang
Date: Wed Sep 01 2021 - 22:25:18 EST

Next message: Liam Beguin: "Re: [PATCH v8 09/14] iio: afe: rescale: fix accuracy for small fractional scales"
Previous message: Andi Kleen: "Re: [mm] 2d146aa3aa: vm-scalability.throughput -36.4% regression"
In reply to: Chia-Wei Wang: "[PATCH v2 2/3] soc: aspeed: Add LPC UART routing support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This email was mistakenly sent.
Please ignore this one and check "[PATCH v2 2/3] soc: aspeed: Add UART routing support" instead.
Thanks.

Chiawei

> From: openbmc
> Sent: Thursday, September 2, 2021 10:18 AM
>
> Add driver support for the LPC UART routing control. Users can perform
> runtime configuration of the RX muxes among the UART controllers and the
> UART IO pins.
>
> A sysfs interface is also exported for the convenience of routing paths check
> and configuration.
>
> Signed-off-by: Chia-Wei Wang <chiawei_wang@xxxxxxxxxxxxxx>
> ---
> .../testing/sysfs-driver-aspeed-uart-routing | 15 +
> drivers/soc/aspeed/Kconfig | 10 +
> drivers/soc/aspeed/Makefile | 9 +-
> drivers/soc/aspeed/aspeed-uart-routing.c | 601 ++++++++++++++++++
> 4 files changed, 631 insertions(+), 4 deletions(-) create mode 100644
> Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
> create mode 100644 drivers/soc/aspeed/aspeed-uart-routing.c
>
> diff --git a/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
> b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
> new file mode 100644
> index 000000000000..65f899f1f055
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-driver-aspeed-uart-routing
> @@ -0,0 +1,15 @@
> +What: /sys/bus/platform/drivers/aspeed-uart-routing/*/uart*
> +Date: September 2021
> +Contact: Chia-Wei Wang <chiawei_wang@xxxxxxxxxxxxxx>
> +Description: Selects the RX source of the UARTx device. The current
> + selection will be marked with the '[]' brackets.
> +Users: OpenBMC. Proposed changes should be mailed to
> + openbmc@xxxxxxxxxxxxxxxx
> +
> +What: /sys/bus/platform/drivers/aspeed-uart-routing/*/io*
> +Date: September 2021
> +Contact: Chia-Wei Wang <chiawei_wang@xxxxxxxxxxxxxx>
> +Description: Selects the RX source of IOx pins. The current selection
> + will be marked with the '[]' brackets.
> +Users: OpenBMC. Proposed changes should be mailed to
> + openbmc@xxxxxxxxxxxxxxxx
> diff --git a/drivers/soc/aspeed/Kconfig b/drivers/soc/aspeed/Kconfig index
> 243ca196e6ad..f579ee0b5afa 100644
> --- a/drivers/soc/aspeed/Kconfig
> +++ b/drivers/soc/aspeed/Kconfig
> @@ -24,6 +24,16 @@ config ASPEED_LPC_SNOOP
> allows the BMC to listen on and save the data written by
> the host to an arbitrary LPC I/O port.
>
> +config ASPEED_UART_ROUTING
> + tristate "ASPEED uart routing control"
> + select REGMAP
> + select MFD_SYSCON
> + default ARCH_ASPEED
> + help
> + Provides a driver to control the UART routing paths, allowing
> + users to perform runtime configuration of the RX muxes among
> + the UART controllers and I/O pins.
> +
> config ASPEED_P2A_CTRL
> tristate "ASPEED P2A (VGA MMIO to BMC) bridge control"
> select REGMAP
> diff --git a/drivers/soc/aspeed/Makefile b/drivers/soc/aspeed/Makefile index
> fcab7192e1a4..b35d74592964 100644
> --- a/drivers/soc/aspeed/Makefile
> +++ b/drivers/soc/aspeed/Makefile
> @@ -1,5 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only
> -obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> -obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> -obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
> -obj-$(CONFIG_ASPEED_SOCINFO) += aspeed-socinfo.o
> +obj-$(CONFIG_ASPEED_LPC_CTRL) += aspeed-lpc-ctrl.o
> +obj-$(CONFIG_ASPEED_LPC_SNOOP) += aspeed-lpc-snoop.o
> +obj-$(CONFIG_ASPEED_UART_ROUTING) += aspeed-uart-routing.o
> +obj-$(CONFIG_ASPEED_P2A_CTRL) += aspeed-p2a-ctrl.o
> +obj-$(CONFIG_ASPEED_SOCINFO) += aspeed-socinfo.o
> diff --git a/drivers/soc/aspeed/aspeed-uart-routing.c
> b/drivers/soc/aspeed/aspeed-uart-routing.c
> new file mode 100644
> index 000000000000..eba6dfebb54f
> --- /dev/null
> +++ b/drivers/soc/aspeed/aspeed-uart-routing.c
> @@ -0,0 +1,601 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2018 Google LLC
> + * Copyright (c) 2021 Aspeed Technology Inc.
> + */
> +#include <linux/device.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_device.h>
> +
> +/* register offsets */
> +#define HICR9 0x98
> +#define HICRA 0x9c
> +
> +/* attributes options */
> +#define UART_ROUTING_IO1 "io1"
> +#define UART_ROUTING_IO2 "io2"
> +#define UART_ROUTING_IO3 "io3"
> +#define UART_ROUTING_IO4 "io4"
> +#define UART_ROUTING_IO5 "io5"
> +#define UART_ROUTING_IO6 "io6"
> +#define UART_ROUTING_IO10 "io10"
> +#define UART_ROUTING_UART1 "uart1"
> +#define UART_ROUTING_UART2 "uart2"
> +#define UART_ROUTING_UART3 "uart3"
> +#define UART_ROUTING_UART4 "uart4"
> +#define UART_ROUTING_UART5 "uart5"
> +#define UART_ROUTING_UART6 "uart6"
> +#define UART_ROUTING_UART10 "uart10"
> +#define UART_ROUTING_RES "reserved"
> +
> +struct aspeed_uart_routing {
> + struct regmap *map;
> + struct attribute_group const *attr_grp; };
> +
> +struct aspeed_uart_routing_selector {
> + struct device_attribute dev_attr;
> + uint8_t reg;
> + uint8_t mask;
> + uint8_t shift;
> + const char *const options[];
> +};
> +
> +#define to_routing_selector(_dev_attr) \
> + container_of(_dev_attr, struct aspeed_uart_routing_selector, dev_attr)
> +
> +static ssize_t aspeed_uart_routing_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf);
> +
> +static ssize_t aspeed_uart_routing_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count);
> +
> +#define ROUTING_ATTR(_name) { \
> + .attr = {.name = _name, \
> + .mode = VERIFY_OCTAL_PERMISSIONS(0644) }, \
> + .show = aspeed_uart_routing_show, \
> + .store = aspeed_uart_routing_store, \
> +}
> +
> +/* routing selector for AST25xx */
> +static struct aspeed_uart_routing_selector ast2500_io6_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO6),
> + .reg = HICR9,
> + .shift = 8,
> + .mask = 0xf,
> + .options = {
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART5,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO5,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_uart5_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART5),
> + .reg = HICRA,
> + .shift = 28,
> + .mask = 0xf,
> + .options = {
> + UART_ROUTING_IO5,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_uart4_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
> + .reg = HICRA,
> + .shift = 25,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_uart3_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
> + .reg = HICRA,
> + .shift = 22,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_uart2_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
> + .reg = HICRA,
> + .shift = 19,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART1,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_uart1_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
> + .reg = HICRA,
> + .shift = 16,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_io5_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO5),
> + .reg = HICRA,
> + .shift = 12,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART5,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_io4_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
> + .reg = HICRA,
> + .shift = 9,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART5,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_io3_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
> + .reg = HICRA,
> + .shift = 6,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART5,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_io2_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
> + .reg = HICRA,
> + .shift = 3,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART5,
> + UART_ROUTING_UART1,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2500_io1_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
> + .reg = HICRA,
> + .shift = 0,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART5,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO6,
> + NULL,
> + },
> +};
> +
> +static struct attribute *ast2500_uart_routing_attrs[] = {
> + &ast2500_io6_sel.dev_attr.attr,
> + &ast2500_uart5_sel.dev_attr.attr,
> + &ast2500_uart4_sel.dev_attr.attr,
> + &ast2500_uart3_sel.dev_attr.attr,
> + &ast2500_uart2_sel.dev_attr.attr,
> + &ast2500_uart1_sel.dev_attr.attr,
> + &ast2500_io5_sel.dev_attr.attr,
> + &ast2500_io4_sel.dev_attr.attr,
> + &ast2500_io3_sel.dev_attr.attr,
> + &ast2500_io2_sel.dev_attr.attr,
> + &ast2500_io1_sel.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ast2500_uart_routing_attr_group = {
> + .attrs = ast2500_uart_routing_attrs,
> +};
> +
> +/* routing selector for AST26xx */
> +static struct aspeed_uart_routing_selector ast2600_uart10_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART10),
> + .reg = HICR9,
> + .shift = 12,
> + .mask = 0xf,
> + .options = {
> + UART_ROUTING_IO10,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_RES,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_io10_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO10),
> + .reg = HICR9,
> + .shift = 8,
> + .mask = 0xf,
> + .options = {
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_RES,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_RES,
> + UART_ROUTING_UART10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_uart4_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART4),
> + .reg = HICRA,
> + .shift = 25,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_uart3_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART3),
> + .reg = HICRA,
> + .shift = 22,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_uart2_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART2),
> + .reg = HICRA,
> + .shift = 19,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO1,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART1,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_uart1_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_UART1),
> + .reg = HICRA,
> + .shift = 16,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_io4_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO4),
> + .reg = HICRA,
> + .shift = 9,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART10,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_io3_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO3),
> + .reg = HICRA,
> + .shift = 6,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART10,
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_IO1,
> + UART_ROUTING_IO2,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_io2_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO2),
> + .reg = HICRA,
> + .shift = 3,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART10,
> + UART_ROUTING_UART1,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct aspeed_uart_routing_selector ast2600_io1_sel = {
> + .dev_attr = ROUTING_ATTR(UART_ROUTING_IO1),
> + .reg = HICRA,
> + .shift = 0,
> + .mask = 0x7,
> + .options = {
> + UART_ROUTING_UART1,
> + UART_ROUTING_UART2,
> + UART_ROUTING_UART3,
> + UART_ROUTING_UART4,
> + UART_ROUTING_UART10,
> + UART_ROUTING_IO3,
> + UART_ROUTING_IO4,
> + UART_ROUTING_IO10,
> + NULL,
> + },
> +};
> +
> +static struct attribute *ast2600_uart_routing_attrs[] = {
> + &ast2600_uart10_sel.dev_attr.attr,
> + &ast2600_io10_sel.dev_attr.attr,
> + &ast2600_uart4_sel.dev_attr.attr,
> + &ast2600_uart3_sel.dev_attr.attr,
> + &ast2600_uart2_sel.dev_attr.attr,
> + &ast2600_uart1_sel.dev_attr.attr,
> + &ast2600_io4_sel.dev_attr.attr,
> + &ast2600_io3_sel.dev_attr.attr,
> + &ast2600_io2_sel.dev_attr.attr,
> + &ast2600_io1_sel.dev_attr.attr,
> + NULL,
> +};
> +
> +static const struct attribute_group ast2600_uart_routing_attr_group = {
> + .attrs = ast2600_uart_routing_attrs,
> +};
> +
> +static ssize_t aspeed_uart_routing_show(struct device *dev,
> + struct device_attribute *attr,
> + char *buf)
> +{
> + struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
> + struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
> + int val, pos, len;
> +
> + regmap_read(uart_routing->map, sel->reg, &val);
> + val = (val >> sel->shift) & sel->mask;
> +
> + len = 0;
> + for (pos = 0; sel->options[pos] != NULL; ++pos) {
> + if (pos == val)
> + len += sysfs_emit_at(buf, len, "[%s] ", sel->options[pos]);
> + else
> + len += sysfs_emit_at(buf, len, "%s ", sel->options[pos]);
> + }
> +
> + if (val >= pos)
> + len += sysfs_emit_at(buf, len, "[unknown(%d)]", val);
> +
> + len += sysfs_emit_at(buf, len, "\n");
> +
> + return len;
> +}
> +
> +static ssize_t aspeed_uart_routing_store(struct device *dev,
> + struct device_attribute *attr,
> + const char *buf, size_t count)
> +{
> + struct aspeed_uart_routing *uart_routing = dev_get_drvdata(dev);
> + struct aspeed_uart_routing_selector *sel = to_routing_selector(attr);
> + int val;
> +
> + val = match_string(sel->options, -1, buf);
> + if (val < 0) {
> + dev_err(dev, "invalid value \"%s\"\n", buf);
> + return -EINVAL;
> + }
> +
> + regmap_update_bits(uart_routing->map, sel->reg,
> + (sel->mask << sel->shift),
> + (val & sel->mask) << sel->shift);
> +
> + return count;
> +}
> +
> +static int aspeed_uart_routing_probe(struct platform_device *pdev) {
> + int rc;
> + struct device *dev = &pdev->dev;
> + struct aspeed_uart_routing *uart_routing;
> +
> + uart_routing = devm_kzalloc(&pdev->dev, sizeof(*uart_routing),
> GFP_KERNEL);
> + if (!uart_routing)
> + return -ENOMEM;
> +
> + uart_routing->map = syscon_node_to_regmap(dev->parent->of_node);
> + if (IS_ERR(uart_routing->map)) {
> + dev_err(dev, "cannot get regmap\n");
> + return PTR_ERR(uart_routing->map);
> + }
> +
> + uart_routing->attr_grp = of_device_get_match_data(dev);
> +
> + rc = sysfs_create_group(&dev->kobj, uart_routing->attr_grp);
> + if (rc < 0)
> + return rc;
> +
> + dev_set_drvdata(dev, uart_routing);
> +
> + dev_info(dev, "module loaded\n");
> +
> + return 0;
> +}
> +
> +static int aspeed_uart_routing_remove(struct platform_device *pdev) {
> + struct device *dev = &pdev->dev;
> + struct aspeed_uart_routing *uart_routing = platform_get_drvdata(pdev);
> +
> + sysfs_remove_group(&dev->kobj, uart_routing->attr_grp);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id aspeed_uart_routing_table[] = {
> + { .compatible = "aspeed,ast2500-uart-routing",
> + .data = &ast2500_uart_routing_attr_group },
> + { .compatible = "aspeed,ast2600-uart-routing",
> + .data = &ast2600_uart_routing_attr_group },
> + { },
> +};
> +
> +static struct platform_driver aspeed_uart_routing_driver = {
> + .driver = {
> + .name = "aspeed-uart-routing",
> + .of_match_table = aspeed_uart_routing_table,
> + },
> + .probe = aspeed_uart_routing_probe,
> + .remove = aspeed_uart_routing_remove,
> +};
> +
> +module_platform_driver(aspeed_uart_routing_driver);
> +
> +MODULE_AUTHOR("Oskar Senft <osk@xxxxxxxxxx>");
> MODULE_AUTHOR("Chia-Wei
> +Wang <chiawei_wang@xxxxxxxxxxxxxx>"); MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("Driver to configure Aspeed UART routing");
> --
> 2.17.1

Next message: Liam Beguin: "Re: [PATCH v8 09/14] iio: afe: rescale: fix accuracy for small fractional scales"
Previous message: Andi Kleen: "Re: [mm] 2d146aa3aa: vm-scalability.throughput -36.4% regression"
In reply to: Chia-Wei Wang: "[PATCH v2 2/3] soc: aspeed: Add LPC UART routing support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]