Re: [PATCH V4] mtd: rawnand: qcom: Update code word value for raw read

[Manivannan Sadhasivam]

On Thu, Sep 02, 2021 at 11:19:23AM +0530, Md Sadre Alam wrote:
> From QPIC V2 onwards there is a separate register to read
> last code word "QPIC_NAND_READ_LOCATION_LAST_CW_n".
> 
> qcom_nandc_read_cw_raw() is used to read only one code word
> at a time. If we will configure number of code words to 1 in
> in QPIC_NAND_DEV0_CFG0 register then QPIC controller thinks
> its reading the last code word, since from QPIC V2 onwards
> we are having separate register to read the last code word,
> we have to configure "QPIC_NAND_READ_LOCATION_LAST_CW_n"
> register to fetch data from controller buffer to system
> memory.
> 
> Fixes: 503ee5aa ("mtd: rawnand: qcom: update last code word register")

Commit hash should be of 12 digits.

> Cc: stable@xxxxxxxxxx
> Signed-off-by: Md Sadre Alam <mdalam@xxxxxxxxxxxxxx>
> ---
> [V4]
>  * Added commit message
>  * Added changelog
> 
>  In commit 503ee5aa added QPIC V2 support. Since QPIC V2 onwards there
>  is separate register to get last CW data. If total number of CW configred is 1 
>  then , QPIC controller treat this as last CW and software shhould copy data to memory
>  via QPIC_NAND_READ_LOCATION_LAST_CW_n register instead of QPIC_NAND_READ_LOCATION_n.
>  Since in raw read we are configuring total number of CW 1, this change fixes
>  this if total number of CW 1 then make this as last CW.  raw_cw = ecc->steps - 1;
>  since ecc->steps holds total number of CWs.
> 

This is not a changelog. Changelog should mention what has been changed
between versions from v1 to v4. For example:

Changes in v4:

* Incorporated AAA comments from X
* Changed a local variable

Changes in v3:

* Incorporated BBB comments from X

Changes in v2:

* Incorporated CCC comments from X

>  drivers/mtd/nand/raw/qcom_nandc.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
> index ef0bade..04e6f7b 100644
> --- a/drivers/mtd/nand/raw/qcom_nandc.c
> +++ b/drivers/mtd/nand/raw/qcom_nandc.c
> @@ -1676,13 +1676,17 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  	struct nand_ecc_ctrl *ecc = &chip->ecc;
>  	int data_size1, data_size2, oob_size1, oob_size2;
>  	int ret, reg_off = FLASH_BUF_ACC, read_loc = 0;
> +	int raw_cw = cw;
>  
>  	nand_read_page_op(chip, page, 0, NULL, 0);
>  	host->use_ecc = false;
>  
> +	if (nandc->props->qpic_v2)
> +		raw_cw = ecc->steps - 1;
> +

Sorry, I don't understand how it can work. For reading a codeword like
0, you are reading the last codeword here if the controller is v2. And
you'll continue to read the last codeword only for any codeword
requested :/

Thanks,
Mani

>  	clear_bam_transaction(nandc);
>  	set_address(host, host->cw_size * cw, page);
> -	update_rw_regs(host, 1, true, cw);
> +	update_rw_regs(host, 1, true, raw_cw);
>  	config_nand_page_read(chip);
>  
>  	data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1);
> @@ -1711,7 +1715,7 @@ qcom_nandc_read_cw_raw(struct mtd_info *mtd, struct nand_chip *chip,
>  		nandc_set_read_loc(chip, cw, 3, read_loc, oob_size2, 1);
>  	}
>  
> -	config_nand_cw_read(chip, false, cw);
> +	config_nand_cw_read(chip, false, raw_cw);
>  
>  	read_data_dma(nandc, reg_off, data_buf, data_size1, 0);
>  	reg_off += data_size1;
> -- 
> 2.7.4
>