[GIT PULL] first round of SCSI updates for the 5.14+ merge window

From: James Bottomley
Date: Thu Sep 02 2021 - 12:50:15 EST

Next message: Russell King (Oracle): "Re: [PATCH 0/2]: ARM: Enable THREAD_INFO_IN_TASK"
Previous message: Das, Nirmoy: "Re: [PATCH 1/1] debugfs: use IS_ERR to check for error"
Next in thread: Linus Torvalds: "Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

This series consists of the usual driver updates (ufs, qla2xxx, target,
smartpqi, lpfc, mpt3sas). The core change causing the most churn was
replacing the command request field request with a macro, allowing us
to offset map to it and remove the redundant field; the same was also
done for the tag field. The most impactful change is the final
removal of scsi_ioctl, which has been deprecated for over a decade.

We also picked up a non trivial conflict with the already upstream
block tree in st.c The correct resolution is here:

https://lore.kernel.org/all/20210824163215.3f08d55c@xxxxxxxxxxxxxxxx/

The patch is available here:

git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc

The short changelog is:

Adrian Hunter (2):
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufshcd: Fix device links when BOOT WLUN fails to probe

Alim Akhtar (1):
scsi: ufs: ufs-exynos: Fix static checker warning

Arun Easi (5):
scsi: qla2xxx: Fix hang on NVMe command timeouts
scsi: qla2xxx: Fix hang during NVMe session tear down
scsi: qla2xxx: Suppress unnecessary log messages during login
scsi: qla2xxx: Show OS name and version in FDMI-1
scsi: qla2xxx: Add host attribute to trigger MPI hang

Avri Altman (16):
scsi: ufs: ufshpb: Do not report victim error in HCM
scsi: ufs: ufshpb: Verify that 'num_inflight_map_req' is non-negative
scsi: ufs: ufshpb: Use a correct max multi chunk
scsi: ufs: ufshpb: Rewind the read timeout on every read
scsi: ufs: ufshpb: Make host mode parameters configurable
scsi: ufs: ufshpb: Add support for host control mode
scsi: ufs: ufshpb: Do not send umap_all in host control mode
scsi: ufs: ufshpb: Limit the number of in-flight map requests
scsi: ufs: ufshpb: Add "cold" regions timer
scsi: ufs: ufshpb: Add HPB dev reset response
scsi: ufs: ufshpb: Region inactivation in host mode
scsi: ufs: ufshpb: Make eviction depend on region's reads
scsi: ufs: ufshpb: Add reads counter
scsi: ufs: ufshpb: Transform set_dirty to iterate_rgn
scsi: ufs: ufshpb: Add host control mode support to rsp_upiu
scsi: ufs: ufshpb: Cache HPB Control mode on init

Balsundar P (1):
scsi: smartpqi: Add PCI IDs for new ZTE controllers

Bart Van Assche (72):
scsi: core: Remove the request member from struct scsi_cmnd
scsi: usb-storage: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: tcm_loop: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: xen-scsifront: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: virtio_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ufs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sym53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sun3_scsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: stex: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: snic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: smartpqi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_debug: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qlogicpti: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla4xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla2xxx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qla1280: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qedi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: qedf: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ncr53c8xx: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: myrs: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: myrb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mvumi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mpt3sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: mpi3mr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: megaraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: lpfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: libsas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ips: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ibmvscsi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ibmvfc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: hpsa: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: hisi_sas: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: fnic: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: dpt_i2o: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: cxlflash: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: csiostor: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: bnx2i: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: aha1542: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: advansys: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: aacraid: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: NCR5380: Use sc_data_direction instead of rq_data_dir()
scsi: 53c700: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: zfcp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: RDMA/srp: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: RDMA/iser: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ata: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_transport_spi: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: scsi_transport_fc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sr: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: sd: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: core: Introduce the scsi_cmd_to_rq() function
scsi: ufs: Add fault injection support
scsi: ufs: Retry aborted SCSI commands instead of completing these successfully
scsi: ufs: Synchronize SCSI and UFS error handling
scsi: ufs: Request sense data asynchronously
scsi: ufs: Fix the SCSI abort handler
scsi: ufs: Optimize SCSI command processing
scsi: ufs: Optimize serialization of setup_xfer_req() calls
scsi: ufs: Revert "Utilize Transfer Request List Completion Notification Register"
scsi: ufs: Inline ufshcd_outstanding_req_clear()
scsi: ufs: Remove several wmb() calls
scsi: ufs: Improve static type checking for the host controller state
scsi: ufs: Verify UIC locking requirements at runtime
scsi: ufs: Remove ufshcd_valid_tag()
scsi: ufs: Use DECLARE_COMPLETION_ONSTACK() where appropriate
scsi: ufs: Rename the second ufshcd_probe_hba() argument
scsi: ufs: Only include power management code if necessary
scsi: ufs: Reduce power management code duplication
scsi: ufs: Fix memory corruption by ufshcd_read_desc_param()
scsi: iser: Use scsi_get_sector() instead of scsi_get_lba()
scsi: core: Introduce scsi_get_sector()

Bean Huo (3):
scsi: ufs: core: Add lu_enable sysfs node
scsi: ufs: core: Add L2P entry swap quirk for Micron UFS
scsi: ufs: core: Remove redundant call in ufshcd_add_command_trace()

Bill Wendling (1):
scsi: qla2xxx: Remove unused variable 'status'

Bodo Stroesser (1):
scsi: target: tcmu: Add new feature KEEP_BUF

Christian Loehle (1):
scsi: sd: Do not exit sd_spinup_disk() quietly

Christoph Hellwig (32):
scsi: bsg-lib: Fix commands without data transfer in bsg_transport_sg_io_fn()
scsi: bsg: Fix commands without data transfer in scsi_bsg_sg_io_fn()
scsi: bsg: Move the whole request execution into the SCSI/transport handlers
scsi: block: Remove the remaining SG_IO-related fields from struct request_queue
scsi: block: Remove BLK_SCSI_MAX_CMDS
scsi: bsg: Simplify device registration
scsi: sr: cdrom: Move cdrom_read_cdda_bpc() into the sr driver
scsi: scsi_ioctl: Unexport sg_scsi_ioctl()
scsi: scsi_ioctl: Factor SG_IO handling into a helper
scsi: scsi_ioctl: Factor SCSI_IOCTL_GET_IDLUN handling into a helper
scsi: scsi_ioctl: Consolidate the START STOP UNIT handling
scsi: scsi_ioctl: Remove a very misleading comment
scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMON
scsi: scsi_ioctl: Move the "block layer" SCSI ioctl handling to drivers/scsi
scsi: scsi_ioctl: Simplify SCSI passthrough permission checking
scsi: scsi_ioctl: Move scsi_command_size_tbl to scsi_common.c
scsi: scsi_ioctl: Remove scsi_req_init()
scsi: bsg: Move bsg_scsi_ops to drivers/scsi/
scsi: bsg: Decouple from scsi_cmd_ioctl()
scsi: block: Add a queue_max_bytes() helper
scsi: scsi_ioctl: Call scsi_cmd_ioctl() from scsi_ioctl()
scsi: scsi_ioctl: Remove scsi_verify_blk_ioctl()
scsi: scsi_ioctl: Remove scsi_cmd_blk_ioctl()
scsi: cdrom: Remove the call to scsi_cmd_blk_ioctl() from cdrom_ioctl()
scsi: st: Simplify ioctl handling
scsi: core: Remove scsi_compat_ioctl()
scsi: sg: Consolidate compat ioctl handling
scsi: ch: Consolidate compat ioctl handling
scsi: sd: Consolidate compat ioctl handling
scsi: sr: Consolidate compat ioctl handling
scsi: bsg: Remove support for SCSI_IOCTL_SEND_COMMAND
scsi: aacraid: Remove an unused include

Colin Ian King (12):
scsi: snic: Fix spelling mistake 'progres' -> 'progress'
scsi: pm8001: Remove redundant initialization of variable 'rv'
scsi: ufs: ufshpb: Remove redundant initialization of variable 'lba'
scsi: elx: efct: Remove redundant initialization of variable 'ret'
scsi: snic: Remove redundant assignment to variable ret
scsi: ufs: Fix unsigned int compared with less than zero
scsi: qla2xxx: Remove redundant initialization of variable num_cnt
scsi: BusLogic: Use %X for u32 sized integer rather than %lX
scsi: qla2xxx: Fix spelling mistakes "allloc" -> "alloc"
scsi: target: Remove redundant assignment to variable ret
scsi: lpfc: Remove redundant assignment to pointer pcmd
scsi: qla2xxx: Remove redundant continue statement in a for-loop

Daejun Park (4):
scsi: ufs: ufshpb: Add HPB 2.0 support
scsi: ufs: ufshpb: Prepare HPB read for cached sub-region
scsi: ufs: ufshpb: L2P map management for HPB read
scsi: ufs: ufshpb: Introduce Host Performance Buffer feature

Damien Le Moal (1):
scsi: mpt3sas: Introduce sas_ncq_prio_supported sysfs sttribute

Dan Carpenter (4):
scsi: qedf: Fix error codes in qedf_alloc_global_queues()
scsi: qedi: Fix error codes in qedi_alloc_global_queues()
scsi: smartpqi: Fix an error code in pqi_get_raid_map()
scsi: qla2xxx: Fix use after free in debug code

David Disseldorp (4):
scsi: target: core: Drop unnecessary se_cmd ASC/ASCQ members
scsi: target: sbp: Drop incorrect ASC/ASCQ usage
scsi: target: core: Avoid using lun_tg_pt_gp after unlock
scsi: target: Fix NULL dereference on XCOPY completion

Dmitry Bogdanov (1):
scsi: target: Fix protect handling in WRITE SAME(32)

Don Brace (3):
scsi: smartpqi: Update version to 2.1.10-020
scsi: smartpqi: Change Kconfig menu entry to Microchip
scsi: smartpqi: Change driver module macros to Microchip

Dwaipayan Ray (1):
scsi: qla4xxx: Convert uses of __constant_cpu_to_<foo> to cpu_to_<foo>

Guoqing Jiang (1):
scsi: libsas: Drop BLK_DEV_BSGLIB selection

Gustavo A. R. Silva (1):
scsi: smartpqi: Replace one-element array with flexible-array member

Halil Pasic (1):
scsi: core: scsi_ioctl: Fix error code propagation in SG_IO

Hannes Reinecke (7):
scsi: ncr53c8xx: Remove unused code
scsi: ncr53c8xx: Complete all commands during bus reset
scsi: ncr53c8xx: Remove 'sync_reset' argument from ncr_reset_bus()
scsi: qla2xxx: Open-code qla2xxx_eh_device_reset()
scsi: qla2xxx: Open-code qla2xxx_eh_target_reset()
scsi: qla2xxx: Do not call fc_block_scsi_eh() during bus reset
scsi: ibmvfc: Do not wait for initial device scan

Harshvardhan Jha (1):
scsi: megaraid_mm: Fix end of loop tests for list_for_each_entry()

Igor Pylypiv (1):
scsi: pm80xx: Fix TMF task completion race condition

James Smart (43):
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
scsi: lpfc: Fix possible ABBA deadlock in nvmet_xri_aborted()
scsi: lpfc: Copyright updates for 14.0.0.0 patches
scsi: lpfc: Update lpfc version to 14.0.0.0
scsi: lpfc: Add 256 Gb link speed support
scsi: lpfc: Revise Topology and RAS support checks for new adapters
scsi: lpfc: Fix cq_id truncation in rq create
scsi: lpfc: Add PCI ID support for LPe37000/LPe38000 series adapters
scsi: lpfc: Copyright updates for 12.8.0.11 patches
scsi: lpfc: Update lpfc version to 12.8.0.11
scsi: lpfc: Skip issuing ADISC when node is in NPR state
scsi: lpfc: Skip reg_vpi when link is down for SLI3 in ADISC cmpl path
scsi: lpfc: Call discovery state machine when handling PLOGI/ADISC completions
scsi: lpfc: Delay unregistering from transport until GIDFT or ADISC completes
scsi: lpfc: Enable adisc discovery after RSCN by default
scsi: lpfc: Use PBDE feature enabled bit to determine PBDE support
scsi: lpfc: Clear outstanding active mailbox during PCI function reset
scsi: lpfc: Fix KASAN slab-out-of-bounds in lpfc_unreg_rpi() routine
scsi: lpfc: Remove REG_LOGIN check requirement to issue an ELS RDF
scsi: lpfc: Fix memory leaks in error paths while issuing ELS RDF/SCR request
scsi: lpfc: Fix NULL ptr dereference with NPIV ports for RDF handling
scsi: lpfc: Keep NDLP reference until after freeing the IOCB after ELS handling
scsi: lpfc: Fix target reset handler from falsely returning FAILURE
scsi: lpfc: Discovery state machine fixes for LOGO handling
scsi: lpfc: Fix function description comments for vmid routines
scsi: lpfc: Improve firmware download logging
scsi: lpfc: Remove use of kmalloc() in trace event logging
scsi: lpfc: Fix NVMe support reporting in log message

Jason Yan (1):
scsi: libsas: Allow libsas to include SCSI header files directly

John Garry (5):
scsi: qla1280: Stop using scsi_cmnd.tag
scsi: core: Remove scsi_cmnd.tag
scsi: ibmvfc: Stop using scsi_cmnd.tag
scsi: fnic: Stop setting scsi_cmnd.tag
scsi: wd719: Stop using scsi_cmnd.tag

Kashyap Desai (1):
scsi: mpi3mr: Set up IRQs in resume path

Keoseong Park (3):
scsi: ufs: ufshpb: Fix typo in comments
scsi: ufs: ufshpb: Fix possible memory leak
scsi: ufs: Refactor ufshcd_is_intr_aggr_allowed()

Kevin Barnett (1):
scsi: smartpqi: Update copyright notices

Li Manyi (1):
scsi: sr: Return correct event when media event code is 3

Maciej W. Rozycki (2):
scsi: BusLogic: Avoid unbounded vsprintf() use
scsi: BusLogic: Fix missing pr_cont() use

Mahesh Rajashekhara (1):
scsi: smartpqi: Add PCI IDs for H3C P4408 controllers

Martin K. Petersen (14):
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: mpi3mr: Use the proper SCSI midlayer interfaces for PI
scsi: isci: Use the proper SCSI midlayer interfaces for PI
scsi: core: Add helper to return number of logical blocks in a request
scsi: ufs: ufshpb: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: storvsc: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
scsi: ufs: core: Use scsi_get_lba() to get LBA
scsi: core: Make scsi_get_lba() return the LBA
scsi: scsi_debug: Improve RDPROTECT/WRPROTECT handling
scsi: scsi_debug: Remove dump_sector()
scsi: zfcp: Use the proper SCSI midlayer interfaces for PI
scsi: qla2xxx: Use the proper SCSI midlayer interfaces for PI
scsi: core: Add scsi_prot_ref_tag() helper

Martin Kepplinger (3):
scsi: core: Add BLIST_IGN_MEDIA_CHANGE for Ultra HS-SD/MMC USB card readers
scsi: sd: REQUEST SENSE for BLIST_IGN_MEDIA_CHANGE devices in runtime_resume()
scsi: core: Add new flag BLIST_IGN_MEDIA_CHANGE

Masahiro Yamada (1):
scsi: core: Fix missing FORCE for scsi_devinfo_tbl.c build rule

Mike Christie (2):
scsi: be2iscsi: Fix use-after-free during IP updates
scsi: iscsi: Fix iface sysfs attr detection

Mike McGowen (2):
scsi: smartpqi: Fix ISR accessing uninitialized data
scsi: smartpqi: Add PCI ID for new ntcom controller

Murthy Bhat (1):
scsi: smartpqi: Add SCSI cmd info for resets

Nilesh Javali (3):
scsi: qla2xxx: Update version to 10.02.06.200-k
scsi: qla2xxx: Update version to 10.02.06.100-k
scsi: qla2xxx: Update version to 10.02.00.107-k

Quinn Tran (23):
scsi: qla2xxx: Fix NVMe session down detection
scsi: qla2xxx: Fix NVMe retry
scsi: qla2xxx: Fix NVMe | FCP personality change
scsi: qla2xxx: edif: Do secure PLOGI when auth app is present
scsi: qla2xxx: edif: Add N2N support for EDIF
scsi: qla2xxx: edif: Fix EDIF enable flag
scsi: qla2xxx: edif: Reject AUTH ELS on session down
scsi: qla2xxx: edif: Fix stale session
scsi: qla2xxx: Fix NPIV create erroneous error
scsi: qla2xxx: Fix unsafe removal from linked list
scsi: qla2xxx: Fix port type info
scsi: qla2xxx: Add debug print of 64G link speed
scsi: qla2xxx: Adjust request/response queue size for 28xx
scsi: qla2xxx: edif: Increment command and completion counts
scsi: qla2xxx: edif: Add encryption to I/O path
scsi: qla2xxx: edif: Add doorbell notification for app
scsi: qla2xxx: edif: Add detection of secure device
scsi: qla2xxx: edif: Add authentication pass + fail bsgs
scsi: qla2xxx: edif: Add key update
scsi: qla2xxx: edif: Add extraction of auth_els from the wire
scsi: qla2xxx: edif: Add send, receive, and accept for auth_els
scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs
scsi: qla2xxx: edif: Add start + stop bsgs

Saurav Kashyap (4):
scsi: qla2xxx: Sync queue idx with queue_pair_map idx
scsi: qla2xxx: Changes to support kdump kernel for NVMe BFS
scsi: qla2xxx: Changes to support kdump kernel
scsi: qla2xxx: Changes to support FCP2 Target

Sergey Samoylenko (2):
scsi: target: Fix sense key for invalid EXTENDED COPY request
scsi: target: Allows backend drivers to fail with specific sense codes

Shai Malin (1):
scsi: qedi: Add support for fastpath doorbell recovery

Sreekanth Reddy (4):
scsi: mpt3sas: Bump driver version to 38.100.00.00
scsi: mpt3sas: Add io_uring iopoll support
scsi: core: Avoid printing an error if target_alloc() returns -ENXIO
scsi: mpt3sas: Transition IOC to Ready state during shutdown

Suganath Prabu S (2):
scsi: mpt3sas: Update driver version to 39.100.00.00
scsi: mpt3sas: Use firmware recommended queue depth

Tuo Li (1):
scsi: target: pscsi: Fix possible null-pointer dereference in pscsi_complete_cmd()

Tyrel Datwyler (1):
scsi: ibmvfc: Fix command state accounting and stale response detection

Vincent Palomares (1):
scsi: ufs: Allow async suspend/resume callbacks

Wei Li (1):
scsi: fdomain: Fix error return code in fdomain_probe()

Ye Bin (1):
scsi: scsi_dh_rdac: Avoid crash during rdac_bus_attach()

kernel test robot (1):
scsi: qla2xxx: edif: Fix returnvar.cocci warnings

lijinlin (1):
scsi: core: Fix capacity set to zero after offlinining device

And the diffstat:

Documentation/ABI/testing/sysfs-driver-ufs | 236 ++
block/Kconfig | 26 +-
block/Makefile | 3 +-
block/blk-mq.c | 2 -
block/bsg-lib.c | 90 +-
block/bsg.c | 463 +---
block/scsi_ioctl.c | 890 ------
drivers/ata/libata-eh.c | 5 +-
drivers/ata/libata-scsi.c | 10 +-
drivers/ata/pata_falcon.c | 4 +-
drivers/base/core.c | 2 +
drivers/block/Kconfig | 3 +-
drivers/block/paride/Kconfig | 1 -
drivers/cdrom/cdrom.c | 78 +-
drivers/infiniband/ulp/iser/iser_memory.c | 2 +-
drivers/infiniband/ulp/iser/iser_verbs.c | 2 +-
drivers/infiniband/ulp/srp/ib_srp.c | 9 +-
drivers/s390/scsi/zfcp_fsf.c | 6 +-
drivers/scsi/53c700.c | 2 +-
drivers/scsi/BusLogic.c | 8 +-
drivers/scsi/Kconfig | 18 +-
drivers/scsi/Makefile | 9 +-
drivers/scsi/NCR5380.c | 6 +-
drivers/scsi/aacraid/aachba.c | 3 +-
drivers/scsi/aacraid/commsup.c | 2 +-
drivers/scsi/advansys.c | 4 +-
drivers/scsi/aha1542.c | 6 +-
drivers/scsi/be2iscsi/be_mgmt.c | 84 +-
drivers/scsi/bnx2i/bnx2i_hwi.c | 2 +-
drivers/scsi/ch.c | 73 +-
drivers/scsi/csiostor/csio_scsi.c | 6 +-
drivers/scsi/cxlflash/main.c | 2 +-
drivers/scsi/device_handler/scsi_dh_rdac.c | 4 +-
drivers/scsi/dpt_i2o.c | 4 +-
drivers/scsi/elx/efct/efct_lio.c | 2 +-
drivers/scsi/fnic/fnic_scsi.c | 51 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 4 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
drivers/scsi/hpsa.c | 6 +-
drivers/scsi/ibmvscsi/ibmvfc.c | 34 +-
drivers/scsi/ibmvscsi/ibmvfc.h | 2 +
drivers/scsi/ibmvscsi/ibmvscsi.c | 2 +-
drivers/scsi/ips.c | 2 +-
drivers/scsi/isci/request.c | 4 +-
drivers/scsi/libsas/Kconfig | 1 -
drivers/scsi/libsas/Makefile | 2 +-
drivers/scsi/libsas/sas_ata.c | 6 +-
drivers/scsi/libsas/sas_discover.c | 2 +-
drivers/scsi/libsas/sas_expander.c | 2 +-
drivers/scsi/libsas/sas_host_smp.c | 2 +-
drivers/scsi/libsas/sas_init.c | 2 +-
drivers/scsi/libsas/sas_phy.c | 2 +-
drivers/scsi/libsas/sas_port.c | 2 +-
drivers/scsi/libsas/sas_scsi_host.c | 8 +-
drivers/scsi/lpfc/lpfc.h | 253 +-
drivers/scsi/lpfc/lpfc_attr.c | 247 +-
drivers/scsi/lpfc/lpfc_bsg.c | 89 +
drivers/scsi/lpfc/lpfc_bsg.h | 10 +-
drivers/scsi/lpfc/lpfc_crtn.h | 30 +
drivers/scsi/lpfc/lpfc_ct.c | 27 +-
drivers/scsi/lpfc/lpfc_debugfs.c | 223 ++
drivers/scsi/lpfc/lpfc_debugfs.h | 11 +-
drivers/scsi/lpfc/lpfc_disc.h | 9 +-
drivers/scsi/lpfc/lpfc_els.c | 1193 +++++++-
drivers/scsi/lpfc/lpfc_hbadisc.c | 221 +-
drivers/scsi/lpfc/lpfc_hw.h | 5 +-
drivers/scsi/lpfc/lpfc_hw4.h | 275 +-
drivers/scsi/lpfc/lpfc_ids.h | 4 +-
drivers/scsi/lpfc/lpfc_init.c | 1495 +++++++++-
drivers/scsi/lpfc/lpfc_logmsg.h | 5 +-
drivers/scsi/lpfc/lpfc_mbox.c | 5 +-
drivers/scsi/lpfc/lpfc_mem.c | 15 +-
drivers/scsi/lpfc/lpfc_nportdisc.c | 43 +-
drivers/scsi/lpfc/lpfc_nvme.c | 54 +-
drivers/scsi/lpfc/lpfc_nvme.h | 9 +-
drivers/scsi/lpfc/lpfc_nvmet.c | 11 +-
drivers/scsi/lpfc/lpfc_scsi.c | 396 ++-
drivers/scsi/lpfc/lpfc_scsi.h | 6 +-
drivers/scsi/lpfc/lpfc_sli.c | 966 ++++++-
drivers/scsi/lpfc/lpfc_sli.h | 2 +
drivers/scsi/lpfc/lpfc_sli4.h | 5 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_mm.c | 21 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 4 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 10 +-
drivers/scsi/mpi3mr/mpi3mr.h | 19 +-
drivers/scsi/mpi3mr/mpi3mr_fw.c | 37 +-
drivers/scsi/mpi3mr/mpi3mr_os.c | 76 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 349 ++-
drivers/scsi/mpt3sas/mpt3sas_base.h | 40 +-
drivers/scsi/mpt3sas/mpt3sas_config.c | 37 +
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 24 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 167 +-
drivers/scsi/mvumi.c | 2 +-
drivers/scsi/myrb.c | 11 +-
drivers/scsi/myrs.c | 11 +-
drivers/scsi/ncr53c8xx.c | 203 +-
drivers/scsi/pcmcia/fdomain_cs.c | 4 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/pm8001/pm8001_sas.c | 32 +-
drivers/scsi/qedf/qedf_io.c | 8 +-
drivers/scsi/qedf/qedf_main.c | 10 +-
drivers/scsi/qedi/qedi_fw.c | 23 +-
drivers/scsi/qedi/qedi_iscsi.c | 36 +-
drivers/scsi/qedi/qedi_iscsi.h | 1 +
drivers/scsi/qedi/qedi_main.c | 14 +-
drivers/scsi/qla1280.c | 7 +-
drivers/scsi/qla2xxx/Makefile | 3 +-
drivers/scsi/qla2xxx/qla_attr.c | 42 +-
drivers/scsi/qla2xxx/qla_bsg.c | 90 +-
drivers/scsi/qla2xxx/qla_bsg.h | 3 +
drivers/scsi/qla2xxx/qla_dbg.c | 3 +-
drivers/scsi/qla2xxx/qla_dbg.h | 1 +
drivers/scsi/qla2xxx/qla_def.h | 221 +-
drivers/scsi/qla2xxx/qla_edif.c | 3461 ++++++++++++++++++++++++
drivers/scsi/qla2xxx/qla_edif.h | 136 +
drivers/scsi/qla2xxx/qla_edif_bsg.h | 220 ++
drivers/scsi/qla2xxx/qla_fw.h | 13 +-
drivers/scsi/qla2xxx/qla_gbl.h | 51 +-
drivers/scsi/qla2xxx/qla_gs.c | 19 +-
drivers/scsi/qla2xxx/qla_init.c | 347 ++-
drivers/scsi/qla2xxx/qla_inline.h | 16 +
drivers/scsi/qla2xxx/qla_iocb.c | 163 +-
drivers/scsi/qla2xxx/qla_isr.c | 357 ++-
drivers/scsi/qla2xxx/qla_mbx.c | 59 +-
drivers/scsi/qla2xxx/qla_mid.c | 49 +-
drivers/scsi/qla2xxx/qla_nvme.c | 77 +-
drivers/scsi/qla2xxx/qla_nx.c | 2 -
drivers/scsi/qla2xxx/qla_os.c | 257 +-
drivers/scsi/qla2xxx/qla_sup.c | 1 -
drivers/scsi/qla2xxx/qla_target.c | 196 +-
drivers/scsi/qla2xxx/qla_target.h | 19 +-
drivers/scsi/qla2xxx/qla_version.h | 6 +-
drivers/scsi/qla4xxx/ql4_init.c | 4 +-
drivers/scsi/qla4xxx/ql4_iocb.c | 4 +-
drivers/scsi/qla4xxx/ql4_mbx.c | 30 +-
drivers/scsi/qla4xxx/ql4_nx.c | 10 +-
drivers/scsi/qla4xxx/ql4_os.c | 14 +-
drivers/scsi/qlogicpti.c | 2 +-
drivers/scsi/scsi.c | 2 +-
drivers/scsi/scsi_bsg.c | 106 +
drivers/scsi/scsi_common.c | 9 +
drivers/scsi/scsi_debug.c | 125 +-
drivers/scsi/scsi_devinfo.c | 1 +
drivers/scsi/scsi_error.c | 16 +-
drivers/scsi/scsi_ioctl.c | 851 +++++-
drivers/scsi/scsi_lib.c | 37 +-
drivers/scsi/scsi_logging.c | 18 +-
drivers/scsi/scsi_priv.h | 3 +
drivers/scsi/scsi_scan.c | 8 +-
drivers/scsi/scsi_sysfs.c | 33 +-
drivers/scsi/scsi_transport_fc.c | 2 +-
drivers/scsi/scsi_transport_iscsi.c | 90 +-
drivers/scsi/scsi_transport_spi.c | 2 +-
drivers/scsi/sd.c | 125 +-
drivers/scsi/sd_zbc.c | 10 +-
drivers/scsi/sg.c | 33 +-
drivers/scsi/smartpqi/Kconfig | 8 +-
drivers/scsi/smartpqi/smartpqi.h | 8 +-
drivers/scsi/smartpqi/smartpqi_init.c | 72 +-
drivers/scsi/smartpqi/smartpqi_sas_transport.c | 4 +-
drivers/scsi/smartpqi/smartpqi_sis.c | 4 +-
drivers/scsi/smartpqi/smartpqi_sis.h | 4 +-
drivers/scsi/snic/snic_scsi.c | 14 +-
drivers/scsi/sr.c | 145 +-
drivers/scsi/st.c | 72 +-
drivers/scsi/stex.c | 6 +-
drivers/scsi/storvsc_drv.c | 4 +-
drivers/scsi/sun3_scsi.c | 5 +-
drivers/scsi/sym53c8xx_2/sym_glue.c | 4 +-
drivers/scsi/ufs/Kconfig | 16 +
drivers/scsi/ufs/Makefile | 2 +
drivers/scsi/ufs/cdns-pltfrm.c | 7 +-
drivers/scsi/ufs/tc-dwc-g210-pci.c | 32 +-
drivers/scsi/ufs/tc-dwc-g210-pltfrm.c | 7 +-
drivers/scsi/ufs/ufs-exynos.c | 11 +-
drivers/scsi/ufs/ufs-exynos.h | 2 +-
drivers/scsi/ufs/ufs-fault-injection.c | 70 +
drivers/scsi/ufs/ufs-fault-injection.h | 24 +
drivers/scsi/ufs/ufs-hisi.c | 7 +-
drivers/scsi/ufs/ufs-mediatek.c | 7 +-
drivers/scsi/ufs/ufs-qcom.c | 7 +-
drivers/scsi/ufs/ufs-sysfs.c | 25 +-
drivers/scsi/ufs/ufs.h | 54 +-
drivers/scsi/ufs/ufs_quirks.h | 6 +
drivers/scsi/ufs/ufshcd-pci.c | 48 +-
drivers/scsi/ufs/ufshcd-pltfrm.c | 47 -
drivers/scsi/ufs/ufshcd-pltfrm.h | 18 -
drivers/scsi/ufs/ufshcd.c | 634 +++--
drivers/scsi/ufs/ufshcd.h | 107 +-
drivers/scsi/ufs/ufshci.h | 1 -
drivers/scsi/ufs/ufshpb.c | 2933 ++++++++++++++++++++
drivers/scsi/ufs/ufshpb.h | 323 +++
drivers/scsi/virtio_scsi.c | 4 +-
drivers/scsi/wd719x.c | 8 +-
drivers/scsi/xen-scsifront.c | 2 +-
drivers/target/Kconfig | 2 +-
drivers/target/iscsi/cxgbit/cxgbit_ddp.c | 2 +-
drivers/target/loopback/tcm_loop.c | 8 +-
drivers/target/sbp/sbp_target.c | 4 +-
drivers/target/target_core_alua.c | 94 +-
drivers/target/target_core_iblock.c | 2 +-
drivers/target/target_core_pscsi.c | 18 +-
drivers/target/target_core_sbc.c | 35 +-
drivers/target/target_core_transport.c | 50 +-
drivers/target/target_core_user.c | 150 +-
drivers/target/target_core_xcopy.c | 26 +-
drivers/usb/storage/transport.c | 2 +-
fs/nfsd/Kconfig | 2 +-
include/linux/blkdev.h | 33 +-
include/linux/bsg-lib.h | 1 +
include/linux/bsg.h | 38 +-
include/linux/cdrom.h | 6 +-
include/scsi/scsi_cmnd.h | 39 +-
include/scsi/scsi_device.h | 22 +-
include/scsi/scsi_devinfo.h | 6 +-
include/scsi/scsi_ioctl.h | 9 +-
include/scsi/scsi_request.h | 2 -
include/target/target_core_backend.h | 1 +
include/target/target_core_base.h | 10 +-
include/uapi/linux/target_core_user.h | 2 +
include/uapi/scsi/fc/fc_els.h | 106 +
222 files changed, 17535 insertions(+), 4196 deletions(-)
delete mode 100644 block/scsi_ioctl.c
create mode 100644 drivers/scsi/qla2xxx/qla_edif.c
create mode 100644 drivers/scsi/qla2xxx/qla_edif.h
create mode 100644 drivers/scsi/qla2xxx/qla_edif_bsg.h
create mode 100644 drivers/scsi/scsi_bsg.c
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.c
create mode 100644 drivers/scsi/ufs/ufs-fault-injection.h
create mode 100644 drivers/scsi/ufs/ufshpb.c
create mode 100644 drivers/scsi/ufs/ufshpb.h

James

Next message: Russell King (Oracle): "Re: [PATCH 0/2]: ARM: Enable THREAD_INFO_IN_TASK"
Previous message: Das, Nirmoy: "Re: [PATCH 1/1] debugfs: use IS_ERR to check for error"
Next in thread: Linus Torvalds: "Re: [GIT PULL] first round of SCSI updates for the 5.14+ merge window"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]