[PATCH] arm64: dts: qcom: sc7180-trogdor: Delete ADC config for unused thermistors

[Matthias Kaehlcke]

The charger thermistor on Lazor, CoachZ rev1 and Pompom rev1+2 is
either the wrong part or not stuffed at all, the same is true for
the skin temperature thermistor on CoachZ rev1. The corresponding
thermal zones are already disabled for these devices, in addition
delete the ADC nodes of the thermistors.

For Lazor and CoachZ rev1 also disable the PM6150 ADC thermal
monitor since there are no other temperatures to monitor.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---

 .../arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts | 12 ++++++++++++
 arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi   | 10 ++++++++++
 .../arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts |  8 ++++++++
 .../arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts |  8 ++++++++
 4 files changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
index 21b516e0694a..edfcd47e1a00 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts
@@ -23,6 +23,18 @@ &charger_thermal {
 	status = "disabled";
 };
 
+&pm6150_adc {
+	/delete-node/ skin-temp-thermistor@4e;
+	/delete-node/ charger-thermistor@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+	/delete-node/ skin-temp-thermistor@1;
+};
+
 /*
  * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature,
  * which currently is not supported by the PM6150 ADC driver. Disable the
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
index 00535aaa43c9..57f7b19f83b0 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
@@ -54,6 +54,16 @@ &panel {
 	compatible = "boe,nv133fhm-n62";
 };
 
+&pm6150_adc {
+	/delete-node/ charger-thermistor@4f;
+};
+
+&pm6150_adc_tm {
+	status = "disabled";
+
+	/delete-node/ charger-thermistor@0;
+};
+
 &trackpad {
 	interrupts = <58 IRQ_TYPE_EDGE_FALLING>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
index e122a6b481ff..76a130bad60a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts
@@ -26,6 +26,14 @@ &charger_thermal {
 	status = "disabled";
 };
 
+&pm6150_adc {
+	/delete-node/ charger-thermistor@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
+
 &pp3300_hub {
 	/* pp3300_l7c is used to power the USB hub */
 	/delete-property/regulator-always-on;
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
index 4f32e6733f4c..88cf2246c18a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts
@@ -22,3 +22,11 @@ / {
 &charger_thermal {
 	status = "disabled";
 };
+
+&pm6150_adc {
+	/delete-node/ charger-thermistor@4f;
+};
+
+&pm6150_adc_tm {
+	/delete-node/ charger-thermistor@0;
+};
-- 
2.33.0.153.gba50c8fa24-goog