[PATCH v4 1/4] dt-bindings: misc: add schema for USB hub on Kirin devices

[Mauro Carvalho Chehab]

From: Yu Chen <chenyu56@xxxxxxxxxx>

This patch adds binding documentation to support USB HUB and
USB data role switch of HiSilicon HiKey960 and HiKey970 boards.

[mchehab: updated OF schema and added HiKey970 example]
Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 .../bindings/misc/hisilicon,hikey-usb.yaml    | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml

diff --git a/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
new file mode 100644
index 000000000000..761ab686121a
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/hisilicon,hikey-usb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiKey960/970 onboard USB GPIO Hub
+
+maintainers:
+  - John Stultz <john.stultz@xxxxxxxxxx>
+
+description: |
+  Supports the onboard USB GPIO hubs found on HiKey960/970.
+  Such hubs require a power supply for the USB I/O. Depending on the
+  exact hub model, after USB I/O is powered up, a reset should be needed.
+
+  It also acts as a role-switch intermediary to detect the state of
+  the USB-C port, to switch the hub into dual-role USB-C or host mode,
+  which enables and powers up the onboard USB-A host ports.
+
+  Schematics about such hubs can be found here:
+    https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf
+    https://www.96boards.org/documentation/consumer/hikey/hikey970/hardware-docs/files/hikey970-schematics.pdf
+
+properties:
+  compatible:
+    enum:
+      - hisilicon,usbhub
+
+  typec-vbus-gpios:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandle to the typec-vbus gpio
+
+  otg-switch-gpios:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandle to the otg-switch gpio
+
+  hub-reset-en-gpios:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description: phandle to the hub reset gpio
+
+  usb-role-switch:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: Support role switch.
+
+  hub-vdd-supply:
+    description: regulator for hub power
+
+  port:
+    description: |
+      describe hadware connections between USB endpoints.
+      Two ports are supported: the first being the endpoint that will
+      be notified by this driver, and the second being the endpoint
+      that notifies this driver of a role switch.
+
+required:
+  - compatible
+  - hub-vdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb-hub {
+        compatible = "hisilicon,usbhub";
+        typec-vbus-gpios = <&gpio25 2 GPIO_ACTIVE_HIGH>;
+        otg-switch-gpios = <&gpio25 6 GPIO_ACTIVE_HIGH>;
+        hub-reset-en-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+        hub-vdd-supply = <&usb_hub_vdd>;
+        usb-role-switch;
+        port {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            usb_ep0: endpoint@0 {
+                reg = <0>;
+                remote-endpoint = <&dwc3_role_switch>;
+            };
+            usb_ep1: endpoint@1 {
+                reg = <1>;
+                remote-endpoint = <&rt1711h_ep>;
+            };
+        };
+    };
-- 
2.31.1