[PATCH 5/6] staging: r8188eu: remove IS_HARDWARE_TYPE_8188* macros

[Michael Straube]

The IS_HARDWARE_TYPE_8188* macros are not needed because the driver
is for RTL8188EU chips, remove them.

Signed-off-by: Michael Straube <straube.linux@xxxxxxxxx>
---
 drivers/staging/r8188eu/hal/rtl8188e_mp.c  | 20 +++++++++-----------
 drivers/staging/r8188eu/include/hal_intf.h | 11 -----------
 2 files changed, 9 insertions(+), 22 deletions(-)

diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index ee0c96890cf3..eb9e32dfcbe7 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -506,12 +506,11 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
 	if (bStart) {
 		/*  Start Single Tone. */
 		/*  <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
-		if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
-			reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
-			reg58 &= 0xFFFFFFF0;
-			reg58 += 2;
-			PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
-		}
+		reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+		reg58 &= 0xFFFFFFF0;
+		reg58 += 2;
+		PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+
 		PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x0);
 		PHY_SetBBReg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x0);
 
@@ -528,11 +527,10 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
 		/*  Stop Single Tone. */
 		/*  <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
 		/*  <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
-		if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
-			reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
-			reg58 &= 0xFFFFFFF0;
-			PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
-		}
+		reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
+		reg58 &= 0xFFFFFFF0;
+		PHY_SetRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask, reg58);
+
 		write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, 0x1);
 		write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, 0x1);
 
diff --git a/drivers/staging/r8188eu/include/hal_intf.h b/drivers/staging/r8188eu/include/hal_intf.h
index bbdbbf9697b1..117a98e5444e 100644
--- a/drivers/staging/r8188eu/include/hal_intf.h
+++ b/drivers/staging/r8188eu/include/hal_intf.h
@@ -283,17 +283,6 @@ enum hardware_type {
 	HARDWARE_TYPE_MAX,
 };
 
-/*  RTL8188E Series */
-#define IS_HARDWARE_TYPE_8188EE(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EE)
-#define IS_HARDWARE_TYPE_8188EU(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188EU)
-#define IS_HARDWARE_TYPE_8188ES(_Adapter)			\
-(((struct adapter *)_Adapter)->HardwareType == HARDWARE_TYPE_RTL8188ES)
-#define	IS_HARDWARE_TYPE_8188E(_Adapter)	\
-(IS_HARDWARE_TYPE_8188EE(_Adapter) || IS_HARDWARE_TYPE_8188EU(_Adapter) || \
- IS_HARDWARE_TYPE_8188ES(_Adapter))
-
 #define GET_EEPROM_EFUSE_PRIV(adapter) (&adapter->eeprompriv)
 
 #define is_boot_from_eeprom(adapter) (adapter->eeprompriv.EepromOrEfuse)
-- 
2.33.0