Re: [PATCH 1/2] dt-bindings: leds: Add Allwinner R329/D1 LED controller
From: Maxime Ripard
Date: Fri Sep 03 2021 - 06:26:52 EST
Hi,
On Thu, Sep 02, 2021 at 06:42:27PM -0500, Samuel Holland wrote:
> The Allwinner R329 and D1 SoCs contain an LED controller designed to
> drive a series of RGB LED pixels. It supports PIO and DMA transfers, and
> has configurable timing and pixel format.
>
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
> ---
> .../leds/allwinner,sun50i-r329-ledc.yaml | 141 ++++++++++++++++++
> 1 file changed, 141 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml
>
> diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml
> new file mode 100644
> index 000000000000..bf883944e911
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-r329-ledc.yaml
> @@ -0,0 +1,141 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/allwinner,sun50i-r329-ledc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Allwinner sunxi LED Controller Bindings
sunxi is ambiguous, it implies that it works with every Allwinner SoC,
but actually supports only one. Please mention R329 everywhere you used
sunxi.
> +
> +maintainers:
> + - Samuel Holland <samuel@xxxxxxxxxxxx>
> +
> +description:
> + The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
> + interface to drive up to 1024 RGB LEDs.
> +
> +properties:
> + compatible:
> + oneOf:
> + - const: allwinner,sun50i-r329-ledc
> + - items:
> + - enum:
> + - allwinner,sun20i-d1-ledc
> + - const: allwinner,sun50i-r329-ledc
> +
> + reg:
> + maxItems: 1
> +
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + clocks:
> + items:
> + - description: Bus clock
> + - description: Module clock
> +
> + clock-names:
> + items:
> + - const: bus
> + - const: mod
> +
> + resets:
> + maxItems: 1
> +
> + dmas:
> + items:
> + - description: TX DMA channel
> +
> + dma-names:
> + items:
> + - const: tx
You don't need the items: here since you have a single item.
> + interrupts:
> + maxItems: 1
> +
> + vled-supply:
> + description: Regulator supplying power to external LEDs
> +
> + format:
> + description: Pixel format (subpixel transmission order), default is "grb"
> + enum:
> + - "bgr"
> + - "brg"
> + - "gbr"
> + - "grb"
> + - "rbg"
> + - "rgb"
> +
> + t0h-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Length of high pulse when transmitting a "0" bit
Every property with an -ns suffix is already a uint32 here:
https://github.com/devicetree-org/dt-schema/blob/master/schemas/property-units.yaml#L54
Just make sure you have a single item
Looks good otherwise, thanks
Maxime
> + t0l-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Length of low pulse when transmitting a "0" bit
> +
> + t1h-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Length of high pulse when transmitting a "1" bit
> +
> + t1h-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Length of low pulse when transmitting a "1" bit
> +
> + treset-ns:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + description: Minimum delay between transmission frames
> +
> +patternProperties:
> + "^multi-led@[0-9a-f]+$":
> + type: object
> + $ref: leds-class-multicolor.yaml#
> + properties:
> + reg:
> + minimum: 0
> + maximum: 1023
> + description: Index of the LED in the series (must be contiguous)
> +
> + required:
> + - reg
> +
> +required:
> + - compatible
> + - reg
> + - clocks
> + - clock-names
> + - resets
> + - dmas
> + - dma-names
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/leds/common.h>
> +
> + ledc: led-controller@2008000 {
> + compatible = "allwinner,sun20i-d1-ledc",
> + "allwinner,sun50i-r329-ledc";
> + reg = <0x2008000 0x400>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&ccu 12>, <&ccu 34>;
> + clock-names = "bus", "mod";
> + resets = <&ccu 12>;
> + dmas = <&dma 42>;
> + dma-names = "tx";
> + interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
> +
> + multi-led@0 {
> + reg = <0x0>;
> + color = <LED_COLOR_ID_RGB>;
> + function = LED_FUNCTION_INDICATOR;
> + };
> + };
> +
> +...
> --
> 2.31.1
>
Attachment:
signature.asc
Description: PGP signature