[PATCH v1] spi: dw: Enable Autosuspend delay for SPI DesignWare

[mahesh . r . vaidya]

From: Mahesh R Vaidya <mahesh.r.vaidya@xxxxxxxxx>

Enable and set Autosuspend delay for SPI DesignWare driver.
The number 1000 ms for the autosuspend delay was picked a bit
arbitrarily, so if someone has measurements showing a better
value we could easily change this.

Signed-off-by: Mahesh R Vaidya <mahesh.r.vaidya@xxxxxxxxx>
---
 drivers/spi/spi-dw-mmio.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 3379720cfcb8..8b588ce9c16b 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -33,6 +33,8 @@ struct dw_spi_mmio {
 	struct reset_control *rstc;
 };

+#define SPI_DW_DEFAULT_AUTOSUSP_VAL		1000
+
 #define MSCC_CPU_SYSTEM_CTRL_GENERAL_CTRL	0x24
 #define OCELOT_IF_SI_OWNER_OFFSET		4
 #define JAGUAR2_IF_SI_OWNER_OFFSET		6
@@ -309,6 +311,10 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 			goto out;
 	}

+	/* Set initial autosuspend default delay value and enable */
+	pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_DW_DEFAULT_AUTOSUSP_VAL);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_runtime_set_active(&pdev->dev);
 	pm_runtime_enable(&pdev->dev);

 	ret = dw_spi_add_host(&pdev->dev, dws);
@@ -319,6 +325,7 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 	return 0;

 out:
+	pm_runtime_put_noidle(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	clk_disable_unprepare(dwsmmio->pclk);
 out_clk:
--
2.17.1