Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug

From: jim . cromie
Date: Fri Sep 03 2021 - 17:58:26 EST

Next message: Russell King (Oracle): "Re: [RFC PATCH net-next 1/3] net: phy: don't bind genphy in phy_attach_direct if the specific driver defers probe"
Previous message: Jonathan Corbet: "Re: [PATCH] docs: kernel-hacking: Remove inappropriate text"
In reply to: Tvrtko Ursulin: "Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug"
Next in thread: Tvrtko Ursulin: "Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Sep 3, 2021 at 5:15 AM Tvrtko Ursulin
<tvrtko.ursulin@xxxxxxxxxxxxxxx> wrote:
>
>
> On 31/08/2021 21:21, Jim Cromie wrote:
> > drm's debug system writes 10 distinct categories of messages to syslog
> > using a small API[1]: drm_dbg*(10 names), DRM_DEV_DEBUG*(3 names),
> > DRM_DEBUG*(8 names). There are thousands of these callsites, each
> > categorized in this systematized way.
> >
> > These callsites can be enabled at runtime by their category, each
> > controlled by a bit in drm.debug (/sys/modules/drm/parameter/debug).
> > In the current "basic" implementation, drm_debug_enabled() tests these
> > bits in __drm_debug each time an API[1] call is executed; while cheap
> > individually, the costs accumulate with uptime.
> >
> > This patch uses dynamic-debug with jump-label to patch enabled calls
> > onto their respective NOOP slots, avoiding all runtime bit-checks of
> > __drm_debug by drm_debug_enabled().
> >
> > Dynamic debug has no concept of category, but we can emulate one by
> > replacing enum categories with a set of prefix-strings; "drm:core:",
> > "drm:kms:" "drm:driver:" etc, and prepend them (at compile time) to
> > the given formats.
> >
> > Then we can use:
> > `echo module drm format "^drm:core: " +p > control`
> >
> > to enable the whole category with one query.
>
> Probably stupid question - enabling stuff at boot time still works as
> described in Documentation/admin-guide/dynamic-debug-howto.rst?
>

yes. its turned on in earlyinit, and cmdline args are a processed then,
and when modules are added

> Second question, which perhaps has been covered in the past so apologies
> if redundant - what is the advantage of allowing this to be
> configurable, versus perhaps always enabling it? Like what would be the
> reasons someone wouldn't just want to have CONFIG_DYNAMIC_DEBUG compiled
> in? Kernel binary size?
>

Im unaware of anything on this topic, but I can opine :-)
Its been configurable since I saw it and thought "jump-labels are cool!"

code is small
[jimc@frodo local-i915m]$ size lib/dynamic_debug.o
text data bss dec hex filename
24016 8041 64 32121 7d79 lib/dynamic_debug.o

Its data tables are big, particularly the __dyndbg section
builtins:
dyndbg: 108 debug prints in module mptcp
dyndbg: 2 debug prints in module i386
dyndbg: 2 debug prints in module xen
dyndbg: 2 debug prints in module fixup
dyndbg: 7 debug prints in module irq
dyndbg: 3039 prdebugs in 283 modules, 11 KiB in ddebug tables, 166 kiB
in __dyndbg section

bash-5.1#
bash-5.1# for m in i915 amdgpu ; do modprobe $m dyndbg=+_ ; done
dyndbg: 384 debug prints in module drm
dyndbg: 211 debug prints in module drm_kms_helper
dyndbg: 2 debug prints in module ttm
dyndbg: 8 debug prints in module video
dyndbg: 1727 debug prints in module i915
dyndbg: processed 1 queries, with 3852 matches, 0 errs
dyndbg: 3852 debug prints in module amdgpu
[drm] amdgpu kernel modesetting enabled.
amdgpu: CRAT table disabled by module option
amdgpu: Virtual CRAT table created for CPU
amdgpu: Topology: Add CPU node
bash-5.1#

At 56 bytes / callsite, it adds up.
And teaching DRM to use it enlarges its use dramatically,
not just in drm itself, but in many drivers

amdgpu has 3852 callsite, (vs 3039 in my kernel), so it has ~240kb.
It has extra (large chunks generated by macros) to trim,
but i915 has ~1700, and drm has ~380

I have WIP to reduce the table space, by splitting it into 2 separate ones;
guts and decorations (module, function, file pointers).
The decoration recs are redundant, 45% are copies of previous
(function changes fastest)
It needs much rework, but it should get 20% overall.
decorations are 24/56 of footprint.

> Regards,
>
> Tvrtko
>
> >
> > This conversion yields many new prdbg callsites:
> >
> > dyndbg: 195 debug prints in module drm_kms_helper
> > dyndbg: 298 debug prints in module drm
> > dyndbg: 1630 debug prints in module i915
> > dyndbg: ~3500 debug prints in module amdgpu
> >
> > CONFIG_DRM_USE_DYNAMIC_DEBUG enables this, and is available if
> > CONFIG_DYNAMIC_DEBUG or CONFIG_DYNAMIC_DEBUG_CORE is chosen, and if
> > CONFIG_JUMP_LABEL is enabled; this because its required to get the
> > promised optimizations.
> >
> > The "basic" -> "dyndbg" switchover is layered into the macro scheme
> >
> > A. A "prefix" version of DRM_UT_<CATs> map, named DRM_DBG_CAT_<CATs>
> >
> > "basic": DRM_DBG_CAT_<CATs> <=== DRM_UT_<CATs>. Identity map.
> > "dyndbg":
> > #define DRM_DBG_CAT_KMS "drm:kms: "
> > #define DRM_DBG_CAT_PRIME "drm:prime: "
> > #define DRM_DBG_CAT_ATOMIC "drm:atomic: "
> >
> > In v3, had older name, DRM_DBG_CLASS_<CATs> was countered, I had
> > agreed, but this seems better still; CATEGORY is already DRM's
> > term-of-art, and adding a near-synonym 'CLASS' only adds ambiguity.
> >
> > DRM_UT_* are preserved, since theyre used elsewhere. We can probably
> > reduce their use further, but thats a separate thing.
> >
> > B. drm_dev_dbg() & drm_debug() are interposed with macros
> >
> > basic: forward to renamed fn, with args preserved
> > enabled: redirect to pr_debug, dev_dbg, with CATEGORY format catenated
> >
> > This is where drm_debug_enabled() is avoided. The prefix is prepended
> > at compile-time, no category at runtime.
> >
> > C. API[1] uses DRM_DBG_CAT_<CAT>s
> >
> > these already use (B), now they use (A) too, to get the correct token
> > type for "basic" and "dyndbg" configs.
> >
> > D. use DEFINE_DYNAMIC_DEBUG_CATEGORIES()
> >
> > This defines the map using DRM_CAT_<CAT>s, and creates the /sysfs
> > bitmap to control those categories.
> >
> > NOTES:
> >
> > Because the dyndbg callback is watching __drm_debug, it is coherent
> > with drm_debug_enabled() and its remaining users; the switchover
> > should be transparent.
> >
> > Code Review is expected to catch the lack of correspondence between
> > bit=>prefix definitions (the selector) and the prefixes used in the
> > API[1] layer above pr_debug()
> >
> > I've coded the search-prefixes/categories with a trailing space, which
> > excludes any sub-categories added later. This convention protects any
> > "drm:atomic:fail:" callsites from getting stomped on by `echo 0 > debug`.
> > Other categories could differ, but we need some default.
> >
> > Dyndbg requires that the prefix be in the compiled-in format string;
> > run-time prefixing evades callsite selection by category.
> >
> > pr_debug("%s: ...", __func__, ...) // not ideal
> >
> > With "lineno X" in a query, its possible to enable single callsites,
> > but it is tedious, and useless in a category context.
> >
> > Unfortunately __func__ is not a macro, and cannot be catenated at
> > preprocess/compile time.
> >
> > Signed-off-by: Jim Cromie <jim.cromie@xxxxxxxxx>
> > ---
> > v5:
> > . use DEFINE_DYNAMIC_DEBUG_CATEGORIES in drm_print.c
> > . s/DRM_DBG_CLASS_/DRM_DBG_CAT_/ - dont need another term
> > . default=y in KBuild entry - per @DanVet
> > . move some commit-log prose to dyndbg commit
> > . add-prototyes to (param_get/set)_dyndbg
> > . more wrinkles found by <lkp@xxxxxxxxx>
> > . relocate ratelimit chunk from elsewhere
> > v6:
> > . add kernel doc
> > . fix cpp paste, drop '#'
> > v7:
> > . change __drm_debug to long, to fit with DEFINE_DYNAMIC_DEBUG_CATEGORIES
> > . add -DDYNAMIC_DEBUG_MODULE to ccflags if DRM_USE_DYNAMIC_DEBUG
> > ---
> > drivers/gpu/drm/Kconfig | 13 ++++
> > drivers/gpu/drm/Makefile | 3 +
> > drivers/gpu/drm/drm_print.c | 53 +++++++++----
> > include/drm/drm_print.h | 144 ++++++++++++++++++++++++++++--------
> > 4 files changed, 166 insertions(+), 47 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> > index 7ff89690a976..97e38d86fd27 100644
> > --- a/drivers/gpu/drm/Kconfig
> > +++ b/drivers/gpu/drm/Kconfig
> > @@ -57,6 +57,19 @@ config DRM_DEBUG_MM
> >
> > If in doubt, say "N".
> >
> > +config DRM_USE_DYNAMIC_DEBUG
> > + bool "use dynamic debug to implement drm.debug"
> > + default y
> > + depends on DRM
> > + depends on DYNAMIC_DEBUG || DYNAMIC_DEBUG_CORE
> > + depends on JUMP_LABEL
> > + help
> > + The "basic" drm.debug facility does a lot of unlikely
> > + bit-field tests at runtime; while cheap individually, the
> > + cost accumulates. DYNAMIC_DEBUG patches pr_debug()s in/out
> > + of the running kernel, so avoids those bit-test overheads,
> > + and is therefore recommended.
> > +
> > config DRM_DEBUG_SELFTEST
> > tristate "kselftests for DRM"
> > depends on DRM
> > diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> > index a118692a6df7..1809329654b3 100644
> > --- a/drivers/gpu/drm/Makefile
> > +++ b/drivers/gpu/drm/Makefile
> > @@ -20,6 +20,9 @@ drm-y := drm_aperture.o drm_auth.o drm_cache.o \
> > drm_client_modeset.o drm_atomic_uapi.o drm_hdcp.o \
> > drm_managed.o drm_vblank_work.o
> >
> > +#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG
> > +ccflags-y += -DDYNAMIC_DEBUG_MODULE
> > +#endif
> > drm-$(CONFIG_DRM_LEGACY) += drm_agpsupport.o drm_bufs.o drm_context.o drm_dma.o \
> > drm_legacy_misc.o drm_lock.o drm_memory.o drm_scatter.o \
> > drm_vm.o
> > diff --git a/drivers/gpu/drm/drm_print.c b/drivers/gpu/drm/drm_print.c
> > index 111b932cf2a9..df2e10754c41 100644
> > --- a/drivers/gpu/drm/drm_print.c
> > +++ b/drivers/gpu/drm/drm_print.c
> > @@ -28,6 +28,7 @@
> > #include <stdarg.h>
> >
> > #include <linux/io.h>
> > +#include <linux/module.h>
> > #include <linux/moduleparam.h>
> > #include <linux/seq_file.h>
> > #include <linux/slab.h>
> > @@ -40,19 +41,39 @@
> > * __drm_debug: Enable debug output.
> > * Bitmask of DRM_UT_x. See include/drm/drm_print.h for details.
> > */
> > -unsigned int __drm_debug;
> > +unsigned long __drm_debug;
> > EXPORT_SYMBOL(__drm_debug);
> >
> > -MODULE_PARM_DESC(debug, "Enable debug output, where each bit enables a debug category.\n"
> > -"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n"
> > -"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n"
> > -"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n"
> > -"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n"
> > -"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n"
> > -"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n"
> > -"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n"
> > -"\t\tBit 8 (0x100) will enable DP messages (displayport code)");
> > -module_param_named(debug, __drm_debug, int, 0600);
> > +#define DRM_DEBUG_DESC \
> > +"Enable debug output, where each bit enables a debug category.\n" \
> > +"\t\tBit 0 (0x01) will enable CORE messages (drm core code)\n" \
> > +"\t\tBit 1 (0x02) will enable DRIVER messages (drm controller code)\n" \
> > +"\t\tBit 2 (0x04) will enable KMS messages (modesetting code)\n" \
> > +"\t\tBit 3 (0x08) will enable PRIME messages (prime code)\n" \
> > +"\t\tBit 4 (0x10) will enable ATOMIC messages (atomic code)\n" \
> > +"\t\tBit 5 (0x20) will enable VBL messages (vblank code)\n" \
> > +"\t\tBit 7 (0x80) will enable LEASE messages (leasing code)\n" \
> > +"\t\tBit 8 (0x100) will enable DP messages (displayport code)."
> > +
> > +#ifdef CONFIG_DRM_USE_DYNAMIC_DEBUG
> > +#include <linux/dynamic_debug.h>
> > +DEFINE_DYNAMIC_DEBUG_CATEGORIES(debug, __drm_debug,
> > + DRM_DEBUG_DESC,
> > + _DD_cat_(DRM_DBG_CAT_CORE),
> > + _DD_cat_(DRM_DBG_CAT_DRIVER),
> > + _DD_cat_(DRM_DBG_CAT_KMS),
> > + _DD_cat_(DRM_DBG_CAT_PRIME),
> > + _DD_cat_(DRM_DBG_CAT_ATOMIC),
> > + _DD_cat_(DRM_DBG_CAT_VBL),
> > + _DD_cat_(DRM_DBG_CAT_STATE),
> > + _DD_cat_(DRM_DBG_CAT_LEASE),
> > + _DD_cat_(DRM_DBG_CAT_DP),
> > + _DD_cat_(DRM_DBG_CAT_DRMRES));
> > +
> > +#else
> > +MODULE_PARM_DESC(debug, DRM_DEBUG_DESC);
> > +module_param_named(debug, __drm_debug, ulong, 0600);
> > +#endif
> >
> > void __drm_puts_coredump(struct drm_printer *p, const char *str)
> > {
> > @@ -256,8 +277,8 @@ void drm_dev_printk(const struct device *dev, const char *level,
> > }
> > EXPORT_SYMBOL(drm_dev_printk);
> >
> > -void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > - const char *format, ...)
> > +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > + const char *format, ...)
> > {
> > struct va_format vaf;
> > va_list args;
> > @@ -278,9 +299,9 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> >
> > va_end(args);
> > }
> > -EXPORT_SYMBOL(drm_dev_dbg);
> > +EXPORT_SYMBOL(__drm_dev_dbg);
> >
> > -void __drm_dbg(enum drm_debug_category category, const char *format, ...)
> > +void ___drm_dbg(enum drm_debug_category category, const char *format, ...)
> > {
> > struct va_format vaf;
> > va_list args;
> > @@ -297,7 +318,7 @@ void __drm_dbg(enum drm_debug_category category, const char *format, ...)
> >
> > va_end(args);
> > }
> > -EXPORT_SYMBOL(__drm_dbg);
> > +EXPORT_SYMBOL(___drm_dbg);
> >
> > void __drm_err(const char *format, ...)
> > {
> > diff --git a/include/drm/drm_print.h b/include/drm/drm_print.h
> > index 9b66be54dd16..973443040561 100644
> > --- a/include/drm/drm_print.h
> > +++ b/include/drm/drm_print.h
> > @@ -35,7 +35,7 @@
> > #include <drm/drm.h>
> >
> > /* Do *not* use outside of drm_print.[ch]! */
> > -extern unsigned int __drm_debug;
> > +extern unsigned long __drm_debug;
> >
> > /**
> > * DOC: print
> > @@ -252,15 +252,15 @@ static inline struct drm_printer drm_err_printer(const char *prefix)
> > /**
> > * enum drm_debug_category - The DRM debug categories
> > *
> > - * Each of the DRM debug logging macros use a specific category, and the logging
> > - * is filtered by the drm.debug module parameter. This enum specifies the values
> > - * for the interface.
> > + * The drm.debug logging API[1] has 10 enumerated categories of
> > + * messages, issued by 3 families of macros: 10 drm_dbg_<CATs>, 8
> > + * DRM_DEBUG_<CATs>, and 3 DRM_DEV_DEBUG_<CATs>.
> > *
> > * Each DRM_DEBUG_<CATEGORY> macro logs to DRM_UT_<CATEGORY> category, except
> > * DRM_DEBUG() logs to DRM_UT_CORE.
> > *
> > - * Enabling verbose debug messages is done through the drm.debug parameter, each
> > - * category being enabled by a bit:
> > + * Enabling categories of debug messages is done through the drm.debug
> > + * parameter, each category being enabled by a bit:
> > *
> > * - drm.debug=0x1 will enable CORE messages
> > * - drm.debug=0x2 will enable DRIVER messages
> > @@ -319,6 +319,86 @@ enum drm_debug_category {
> > DRM_UT_DRMRES = 0x200,
> > };
> >
> > +/**
> > + * DOC: DRM_USE_DYNAMIC_DEBUG - using dyndbg in drm.debug
> > + *
> > + * In the "basic" drm.debug implementation outlined above, each time a
> > + * drm-debug API[1] call is executed, drm_debug_enabled(cat) tests
> > + * drm.debug vs cat before printing.
> > + *
> > + * DYNAMIC_DEBUG (aka: dyndbg) patches pr_debug()s in^out of the
> > + * running kernel, so it can avoid drm_debug_enabled() and skip lots
> > + * of unlikely bit tests.
> > + *
> > + * dyndbg has no concept of category, but we can prepend a
> > + * class-prefix string: "drm:core: ", "drm:kms: ", "drm:driver: " etc,
> > + * to pr_debug's format (at compile time).
> > + *
> > + * Then control the category
> > + * `echo module drm format "^drm:core: " +p > control`
> > + * `dynamic_debug_exec_queries("format '^drm:core: ' +p", "drm");`
> > + *
> > + * To do this for "basic" | "dyndbg", adaptation adds some macro indirection:
> > + *
> > + * 0. use dyndbg support to define the bits => prefixes map, attach callback.
> > + *
> > + * DYNDBG_BITMAP_DESC(debug, __drm_debug,
> > + * "drm.debug - overview",
> > + * { "drm:core:", "enable CORE debug messages" },
> > + * { "drm:kms:", "enable KMS debug messages" }, ...);
> > + *
> > + * 1. DRM_DBG_CAT_<CAT>
> > + *
> > + * This set of symbols replaces DRM_UT_<CAT> in the drm-debug API; it
> > + * is either a copy of DRM_UT_<CAT>, or the class-prefix strings.
> > + *
> > + * 2. drm_dev_dbg & drm_debug are called by drm.debug API
> > + *
> > + * These are now macros, either forwarding to renamed functions, or
> > + * prepending the class string to the format, and invoking pr_debug
> > + * directly. Since the API is all macros, dyndbg remembers
> > + * per-pr_debug: module,file,func,line,format and uses that to find
> > + * and enable them.
> > + */
> > +#if !defined(CONFIG_DRM_USE_DYNAMIC_DEBUG)
> > +
> > +#define __drm_dbg(cls, fmt, ...) \
> > + ___drm_dbg(cls, fmt, ##__VA_ARGS__)
> > +#define drm_dev_dbg(dev, cls, fmt, ...) \
> > + __drm_dev_dbg(dev, cls, fmt, ##__VA_ARGS__)
> > +
> > +#define DRM_DBG_CAT_CORE DRM_UT_CORE
> > +#define DRM_DBG_CAT_DRIVER DRM_UT_DRIVER
> > +#define DRM_DBG_CAT_KMS DRM_UT_KMS
> > +#define DRM_DBG_CAT_PRIME DRM_UT_PRIME
> > +#define DRM_DBG_CAT_ATOMIC DRM_UT_ATOMIC
> > +#define DRM_DBG_CAT_VBL DRM_UT_VBL
> > +#define DRM_DBG_CAT_STATE DRM_UT_STATE
> > +#define DRM_DBG_CAT_LEASE DRM_UT_LEASE
> > +#define DRM_DBG_CAT_DP DRM_UT_DP
> > +#define DRM_DBG_CAT_DRMRES DRM_UT_DRMRES
> > +
> > +#else /* CONFIG_DRM_USE_DYNAMIC_DEBUG */
> > +
> > +/* join prefix+format in cpp so dyndbg can see it */
> > +#define __drm_dbg(cls, fmt, ...) \
> > + pr_debug(cls fmt, ##__VA_ARGS__)
> > +#define drm_dev_dbg(dev, cls, fmt, ...) \
> > + dev_dbg(dev, cls fmt, ##__VA_ARGS__)
> > +
> > +#define DRM_DBG_CAT_CORE "drm:core: "
> > +#define DRM_DBG_CAT_DRIVER "drm:drvr: "
> > +#define DRM_DBG_CAT_KMS "drm:kms: "
> > +#define DRM_DBG_CAT_PRIME "drm:prime: "
> > +#define DRM_DBG_CAT_ATOMIC "drm:atomic: "
> > +#define DRM_DBG_CAT_VBL "drm:vbl: "
> > +#define DRM_DBG_CAT_STATE "drm:state: "
> > +#define DRM_DBG_CAT_LEASE "drm:lease: "
> > +#define DRM_DBG_CAT_DP "drm:dp: "
> > +#define DRM_DBG_CAT_DRMRES "drm:res: " /* not in MODULE_PARM_DESC */
> > +
> > +#endif /* CONFIG_DRM_USE_DYNAMIC_DEBUG */
> > +
> > static inline bool drm_debug_enabled(enum drm_debug_category category)
> > {
> > return unlikely(__drm_debug & category);
> > @@ -334,8 +414,8 @@ __printf(3, 4)
> > void drm_dev_printk(const struct device *dev, const char *level,
> > const char *format, ...);
> > __printf(3, 4)
> > -void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > - const char *format, ...);
> > +void __drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > + const char *format, ...);
> >
> > /**
> > * DRM_DEV_ERROR() - Error output.
> > @@ -383,7 +463,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > * @fmt: printf() like format string.
> > */
> > #define DRM_DEV_DEBUG(dev, fmt, ...) \
> > - drm_dev_dbg(dev, DRM_UT_CORE, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg(dev, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
> > /**
> > * DRM_DEV_DEBUG_DRIVER() - Debug output for vendor specific part of the driver
> > *
> > @@ -391,7 +471,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > * @fmt: printf() like format string.
> > */
> > #define DRM_DEV_DEBUG_DRIVER(dev, fmt, ...) \
> > - drm_dev_dbg(dev, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg(dev, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
> > /**
> > * DRM_DEV_DEBUG_KMS() - Debug output for modesetting code
> > *
> > @@ -399,7 +479,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > * @fmt: printf() like format string.
> > */
> > #define DRM_DEV_DEBUG_KMS(dev, fmt, ...) \
> > - drm_dev_dbg(dev, DRM_UT_KMS, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg(dev, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
> >
> > /*
> > * struct drm_device based logging
> > @@ -443,25 +523,25 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> >
> >
> > #define drm_dbg_core(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_CORE, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
> > #define drm_dbg(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
> > #define drm_dbg_kms(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_KMS, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
> > #define drm_dbg_prime(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_PRIME, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
> > #define drm_dbg_atomic(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
> > #define drm_dbg_vbl(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_VBL, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
> > #define drm_dbg_state(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_STATE, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_STATE, fmt, ##__VA_ARGS__)
> > #define drm_dbg_lease(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_LEASE, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
> > #define drm_dbg_dp(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DP, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DP, fmt, ##__VA_ARGS__)
> > #define drm_dbg_drmres(drm, fmt, ...) \
> > - drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRMRES, fmt, ##__VA_ARGS__)
> > + drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_DBG_CAT_DRMRES, fmt, ##__VA_ARGS__)
> >
> >
> > /*
> > @@ -471,7 +551,7 @@ void drm_dev_dbg(const struct device *dev, enum drm_debug_category category,
> > */
> >
> > __printf(2, 3)
> > -void __drm_dbg(enum drm_debug_category category, const char *format, ...);
> > +void ___drm_dbg(enum drm_debug_category category, const char *format, ...);
> > __printf(1, 2)
> > void __drm_err(const char *format, ...);
> >
> > @@ -500,29 +580,30 @@ void __drm_err(const char *format, ...);
> > #define DRM_ERROR_RATELIMITED(fmt, ...) \
> > DRM_DEV_ERROR_RATELIMITED(NULL, fmt, ##__VA_ARGS__)
> >
> > +
> > #define DRM_DEBUG(fmt, ...) \
> > - __drm_dbg(DRM_UT_CORE, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_CORE, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_DRIVER(fmt, ...) \
> > - __drm_dbg(DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_DRIVER, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_KMS(fmt, ...) \
> > - __drm_dbg(DRM_UT_KMS, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_KMS, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_PRIME(fmt, ...) \
> > - __drm_dbg(DRM_UT_PRIME, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_PRIME, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_ATOMIC(fmt, ...) \
> > - __drm_dbg(DRM_UT_ATOMIC, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_ATOMIC, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_VBL(fmt, ...) \
> > - __drm_dbg(DRM_UT_VBL, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_VBL, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_LEASE(fmt, ...) \
> > - __drm_dbg(DRM_UT_LEASE, fmt, ##__VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_LEASE, fmt, ##__VA_ARGS__)
> >
> > #define DRM_DEBUG_DP(fmt, ...) \
> > - __drm_dbg(DRM_UT_DP, fmt, ## __VA_ARGS__)
> > + __drm_dbg(DRM_DBG_CAT_DP, fmt, ## __VA_ARGS__)
> >
> > #define __DRM_DEFINE_DBG_RATELIMITED(category, drm, fmt, ...) \
> > ({ \
> > @@ -530,7 +611,8 @@ void __drm_err(const char *format, ...);
> > const struct drm_device *drm_ = (drm); \
> > \
> > if (drm_debug_enabled(DRM_UT_ ## category) && __ratelimit(&rs_)) \
> > - drm_dev_printk(drm_ ? drm_->dev : NULL, KERN_DEBUG, fmt, ## __VA_ARGS__); \
> > + drm_dev_dbg((drm_) ? (drm_)->dev : NULL, \
> > + DRM_DBG_CAT_ ## category, fmt, ##__VA_ARGS__); \
> > })
> >
> > #define drm_dbg_kms_ratelimited(drm, fmt, ...) \
> >

Next message: Russell King (Oracle): "Re: [RFC PATCH net-next 1/3] net: phy: don't bind genphy in phy_attach_direct if the specific driver defers probe"
Previous message: Jonathan Corbet: "Re: [PATCH] docs: kernel-hacking: Remove inappropriate text"
In reply to: Tvrtko Ursulin: "Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug"
Next in thread: Tvrtko Ursulin: "Re: [Intel-gfx] [PATCH v7 5/8] drm_print: add choice to use dynamic debug in drm-debug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]