Re: [PATCH v2] Input: ili210x - Set the device name according to the device model

[Dmitry Torokhov]

Hi Rogerio,

On Fri, Sep 03, 2021 at 01:54:48PM -0300, Rogerio Pimentel wrote:
> Adding the device model into the device name is useful when
> applications need to set different parameters according to the
> touchscreen being used, e.g. X11 calibration points.

Typically model would go into input->id.product and optionally
input->id.version.

> 
> Signed-off-by: Rogerio Pimentel <rpimentel.silva@xxxxxxxxx>
> ---
> 
> Changes since v1: Get the device ID from touchscreen controller
> instead of driver's device list.
> 
>  drivers/input/touchscreen/ili210x.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
> index 199cf3daec10..7a897a03ed70 100644
> --- a/drivers/input/touchscreen/ili210x.c
> +++ b/drivers/input/touchscreen/ili210x.c
> @@ -19,10 +19,14 @@
>  #define ILI251X_DATA_SIZE1	31
>  #define ILI251X_DATA_SIZE2	20
>  
> +#define ILI_NAME_LEN		27
> +#define ILITEK_TS_NAME "Ilitek ILI%x%x Touchscreen"
> +
>  /* Touchscreen commands */
>  #define REG_TOUCHDATA		0x10
>  #define REG_PANEL_INFO		0x20
>  #define REG_CALIBRATE		0xcc
> +#define REG_TS_MODEL		0x61
>  
>  struct ili2xxx_chip {
>  	int (*read_reg)(struct i2c_client *client, u8 reg,
> @@ -384,6 +388,8 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>  	struct input_dev *input;
>  	int error;
>  	unsigned int max_xy;
> +	unsigned char buf[2];
> +	char *model_name;
>  
>  	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
>  
> @@ -430,7 +436,10 @@ static int ili210x_i2c_probe(struct i2c_client *client,
>  	i2c_set_clientdata(client, priv);
>  
>  	/* Setup input device */
> -	input->name = "ILI210x Touchscreen";
> +	input->name = ILITEK_TS_NAME;
> +	model_name = (char *)input->name;

Umm, no. Smashing RO data is not nice.

> +	priv->chip->read_reg(priv->client, REG_TS_MODEL, buf, 2);
> +	snprintf(model_name, ILI_NAME_LEN, input->name, buf[1], buf[0]);
>  	input->id.bustype = BUS_I2C;
>  
>  	/* Multi touch */
> -- 
> 2.17.1
> 

Thanks.

-- 
Dmitry