Re: [PATCH v2] cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode

From: Srinivas Pandruvada
Date: Tue Sep 07 2021 - 12:02:14 EST

Next message: Eric Snowberg: "[PATCH v5 04/12] integrity: restrict INTEGRITY_KEYRING_MACHINE to restrict_link_by_ca"
Previous message: Laurentiu Tudor: "Re: [PATCH] software node: balance refcount for managed sw nodes"
In reply to: Doug Smythies: "Re: [PATCH v2] cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode"
Next in thread: Doug Smythies: "Re: [PATCH v2] cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Doug,

On Tue, 2021-09-07 at 08:45 -0700, Doug Smythies wrote:
> Hi all,
>
> Recent ASUS BIOS updates have changed the default system
> response for this old thread, rendering "intel_pstate=no_hwp"
> useless.
>
> It also raises a question: If BIOS has forced HWP, then how do we
> prevent the acpi-cpufreq driver from being used? Read on.

Does BIOS has option to enable Intel speed shift with no legacy
support?
Then this option will not populate ACPI _PSS table.

>
> On Fri, May 14, 2021 at 3:12 PM Doug Smythies <dsmythies@xxxxxxxxx>
> wrote:
> >
> > On Fri, May 14, 2021 at 1:33 PM Giovanni Gherdovich <
> > ggherdovich@xxxxxxx> wrote:
> > > On Fri, 2021-05-14 at 08:31 -0700, Doug Smythies wrote:
> ...
> > >
> > > when COMETLAKE is not in that list, can you confirm that if you
> > > go into the
> > > BIOS config at boot, and disable HWP from there, then
> > > intel_pstate does *not* load?
> >
> > Yes, already tested before my original reply.
> >
> > > Does it say "intel_pstate: CPU model not supported" in the dmesg
> > > log?
> >
> > That I did not check, but if I boot now with an unmodified kernel
> > 5.13-rc1 (i.e. without this patch):
> >
> > [    0.369323] intel_pstate: CPU model not supported
> >
> > > The control may be somewhere around "power mangement" in the BIOS
> > > config, and
> > > may be called "Enable/disable Intel Speed Shift".
> >
> > Yes.
> >
> > > I'm asking because I've just checked on two Dell laptops, one
> > > Skylake and the
> > > other Kabylake, and the menu is there in the BIOS config to
> > > disable HWP,
> > > but if I disable it... nothing happens. "lscpu" shows all the hwp
> > > flags as usual:
> >
> > Motherboard here is ASUS PRIME Z490-A.
> > CPU: Intel(R) Core(TM) i5-10600K CPU @ 4.10GHz
> >
> > >     # lscpu | grep Flags | tr ' ' '\n' | grep hwp
> > >     hwp
> > >     hwp_notify
> > >     hwp_act_window
> > >     hwp_epp
> >
> > Here, for some reason I have to do it this way (sudo) or your
> > command
> > doesn't work properly. Results herein confirmed by looking at the
> > "Flags" output manually without filtering:
> >
> > intel_speed_shift = Disabled in BIOS:
> >
> > doug@s19:~$ sudo lscpu | tr ' ' '\n' | grep hwp
> > doug@s19:~$
> >
> > intel_speed_shift = Auto in BIOS
> >
> > $ sudo lscpu | tr ' ' '\n' | grep hwp
> > hwp
> > hwp_notify
> > hwp_act_window
> > hwp_epp
> >
> > > and turbostat gives me:
> > >
> > >     # turbostat -Summary -i 1 : 2>&1 | grep MSR_PM_ENABLE
> > >     cpu0: MSR_PM_ENABLE: 0x00000001 (HWP)
> >
> > Here:
> >
> > intel_speed_shift = Disabled in BIOS:
> >
> > root@s19:/home/doug#
> > /home/doug/temp-k-git/linux/tools/power/x86/turbostat/turbostat
> > -Summary -i 1 : 2>&1 | grep MSR_PM_ENABLE
> > root@s19:/home/doug#
> >
> > intel_speed_shift = Auto in BIOS (the default setting)
> >
> > root@s19:/home/doug#
> > /home/doug/temp-k-git/linux/tools/power/x86/turbostat/turbostat
> > -Summary -i 1 : 2>&1 | grep MSR_PM_ENABLE
> > cpu0: MSR_PM_ENABLE: 0x00000001 (HWP)
> >
> > or with "intel_pstate=no_hwp"
> >
> > root@s19:/home/doug#
> > /home/doug/temp-k-git/linux/tools/power/x86/turbostat/turbostat
> > -Summary -i 1 : 2>&1 | grep MSR_PM_ENABLE
> > cpu0: MSR_PM_ENABLE: 0x00000000 (No-HWP)
> >
> > > Which is to say, on the Intel client machines I have, the
> > > firmware doesn't
> > > seem to be able to hide HWP from the OS. Buggy BIOS? Maybe, the
> > > fact of the
> > > matter is, I wouldn't need to add, say, KABYLAKE to that list,
> > > based on my
> > > experience.
> >
> > My experience (hardware) differs from yours with respect to this.
> >
> > > The other side of the issue is that, from my understanding, the
> > > preferred/supported way to disable HWP is to boot with
> > > intel_pstate=no_hwp,
>
> Previous correspondence was with BIOS version 1003. There have been 3
> BIOS
> releases since then (at least that I know of), 2103, 2201, 2301, and
> all of them
> have changed the behaviour of the "Auto" setting for Intel Speed
> Shift
> Technology BIOS setting, forcing it on upon transfer of control to
> the OS.
>
> Where with "intel_pstate=no_hwp" one used to get 0 for MSR_PM_ENABLE
> (0x770) they now get 1.

So they are forcing Out of band OOB mode.
Does bit 8 or 18 in MSR 0x1aa is set?

Thanks,
Srinivas

>
> That was for my ASUS Z490-P Motherboard.
> For my ASUS Z390-A Motherboard (actually a windows 10 computer now),
> with an older BIOS, things still work properly for
> "intel_pstate=no_hwp", and
> while there is a newer BIOS, I will not install it as it is also not
> possible to
> rollback.
>
> I have had an escalation in progress with ASUS about this for about a
> month,
> and while they have been responsive we have communications/language
> issues and have yet to even agree that there is an issue.
>
> I have been working with this incomplete patch:
>
> diff --git a/drivers/cpufreq/intel_pstate.c
> b/drivers/cpufreq/intel_pstate.c
> index bb4549959b11..7dcc51ee56ea 100644
> --- a/drivers/cpufreq/intel_pstate.c
> +++ b/drivers/cpufreq/intel_pstate.c
> @@ -3347,17 +3347,27 @@ device_initcall(intel_pstate_init);
>
> static int __init intel_pstate_setup(char *str)
> {
> +       /* The following needs to be conditional on CPUID with EAX 6
> */
> +       /* CPUID.06H:EAX[bit 7], which I do not know how to do. */
> +       /* Avoid doing checking and printing multiple times, */
> +       /* which I do not know why it does. */
> +       if(!force_load){
> +               if(intel_pstate_hwp_is_enabled()){
> +                       pr_info("HWP enabled by BIOS\n");
> +                       force_load = 1;
> +               }
> +       }
>         if (!str)
>                 return -EINVAL;
>
> -       if (!strcmp(str, "disable"))
> +       if (!strcmp(str, "disable") && !force_load)
>                 no_load = 1;
> -       else if (!strcmp(str, "active"))
> +       if (!strcmp(str, "active") && !no_load)
>                 default_driver = &intel_pstate;
>         else if (!strcmp(str, "passive"))
>                 default_driver = &intel_cpufreq;
>
> -       if (!strcmp(str, "no_hwp")) {
> +       if (!strcmp(str, "no_hwp") && !force_load) {
>                 pr_info("HWP disabled\n");
>                 no_hwp = 1;
>         }
>
> Which has troubles when HWP has been disabled by BIOS, but otherwise
> works well.
>
> HWP Disabled by BIOS:
>
> doug@s19:~$ sudo dmesg | grep intel_pstate
> [sudo] password for doug:
> [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=314 intel_pstate=active intel_pstate=no_hwp
> msr.allow_writes=on cpuidle.governor=teo
> [    0.000000] intel_pstate_setup+0x24/0x151
> [    0.000000] intel_pstate_setup+0x24/0x151
> [    0.000000] intel_pstate: HWP disabled
> [    0.051278] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=314 intel_pstate=active intel_pstate=no_hwp
> msr.allow_writes=on cpuidle.governor=teo
> [    0.393236] intel_pstate: Intel P-state driver initializing
>
> HWP force enabled by BIOS, which is the only other option with the
> newer BIOS:
>
> doug@s19:~$ sudo dmesg | grep intel_pstate
> [sudo] password for doug:
> [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=314 intel_pstate=active intel_pstate=no_hwp
> msr.allow_writes=on cpuidle.governor=teo
> [    0.000000] intel_pstate: HWP enabled by BIOS
> [    0.049205] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=314 intel_pstate=active intel_pstate=no_hwp
> msr.allow_writes=on cpuidle.governor=teo
> [    0.370662] intel_pstate: Intel P-state driver initializing
> [    0.371590] intel_pstate: HWP enabled
>
> HWP forced by BIOS, disable intel_pstate:
>
> doug@s19:~$ sudo dmesg | grep intel_pstate
> [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=300 intel_pstate=disable msr.allow_writes=on
> cpuidle.governor=teo
> [    0.000000] intel_pstate: HWP enabled by BIOS
> [    0.049133] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-5.14.0-ipstate4
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=300 intel_pstate=disable msr.allow_writes=on
> cpuidle.governor=teo
> [    0.370519] intel_pstate: Intel P-state driver initializing
> [    0.371451] intel_pstate: HWP enabled
> doug@s19:~$ cat /sys/devices/system/cpu/cpu5/cpufreq/scaling_driver
> intel_pstate
>
> HWP forced by BIOS, disable intel_pstate:, unpatched kernel 5.14:
>
> doug@s19:~$ sudo dmesg | grep intel_pstate
> [    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.14.0-stock
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=300 intel_pstate=disable msr.allow_writes=on
> cpuidle.governor=teo
> [    0.049108] Kernel command line:
> BOOT_IMAGE=/boot/vmlinuz-5.14.0-stock
> root=UUID=0ac356c1-caa9-4c2e-8229-4408bd998dbd ro ipv6.disable=1
> consoleblank=300 intel_pstate=disable msr.allow_writes=on
> cpuidle.governor=teo
> doug@s19:~$ cat /sys/devices/system/cpu/cpu5/cpufreq/scaling_driver
> acpi-cpufreq
> doug@s19:~$ sudo rdmsr 0x770
> 1
>
> Observe the driver ended up as acpi-cpufreq, but with HWP enabled.
>
> ... Doug

Next message: Eric Snowberg: "[PATCH v5 04/12] integrity: restrict INTEGRITY_KEYRING_MACHINE to restrict_link_by_ca"
Previous message: Laurentiu Tudor: "Re: [PATCH] software node: balance refcount for managed sw nodes"
In reply to: Doug Smythies: "Re: [PATCH v2] cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode"
Next in thread: Doug Smythies: "Re: [PATCH v2] cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]