[BUG] Re: [PATCH] brcmfmac: use ISO3166 country code and 0 rev as fallback

[Soeren Moch]

On 25.04.21 13:02, Shawn Guo wrote:
> Instead of aborting country code setup in firmware, use ISO3166 country
> code and 0 rev as fallback, when country_codes mapping table is not
> configured.  This fallback saves the country_codes table setup for recent
> brcmfmac chipsets/firmwares, which just use ISO3166 code and require no
> revision number.
This patch breaks wireless support on RockPro64. At least the access
point is not usable, station mode not tested.

brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4359/9 wl0: Mar  6 2017
10:16:06 version 9.87.51.7 (r686312) FWID 01-4dcc75d9

Reverting this patch makes the access point show up again with linux-5.14 .

Regards,
Soeren
> Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
> ---
>  .../broadcom/brcm80211/brcmfmac/cfg80211.c      | 17 +++++++++++------
>  1 file changed, 11 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> index f4405d7861b6..6cb09c7c37b6 100644
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
> @@ -7442,18 +7442,23 @@ static s32 brcmf_translate_country_code(struct brcmf_pub *drvr, char alpha2[2],
>  	s32 found_index;
>  	int i;
>
> -	country_codes = drvr->settings->country_codes;
> -	if (!country_codes) {
> -		brcmf_dbg(TRACE, "No country codes configured for device\n");
> -		return -EINVAL;
> -	}
> -
>  	if ((alpha2[0] == ccreq->country_abbrev[0]) &&
>  	    (alpha2[1] == ccreq->country_abbrev[1])) {
>  		brcmf_dbg(TRACE, "Country code already set\n");
>  		return -EAGAIN;
>  	}
>
> +	country_codes = drvr->settings->country_codes;
> +	if (!country_codes) {
> +		brcmf_dbg(TRACE, "No country codes configured for device, using ISO3166 code and 0 rev\n");
> +		memset(ccreq, 0, sizeof(*ccreq));
> +		ccreq->country_abbrev[0] = alpha2[0];
> +		ccreq->country_abbrev[1] = alpha2[1];
> +		ccreq->ccode[0] = alpha2[0];
> +		ccreq->ccode[1] = alpha2[1];
> +		return 0;
> +	}
> +
>  	found_index = -1;
>  	for (i = 0; i < country_codes->table_size; i++) {
>  		cc = &country_codes->table[i];