Re: [PATCH v6 3/3] hwmon: (nct6775) Support access via Asus WMI.

[Guenter Roeck]

On 9/16/21 1:34 AM, Andy Shevchenko wrote:
> On Wed, Sep 15, 2021 at 11:45 PM Denis Pauk <pauk.denis@xxxxxxxxx> wrote:
> > Support accessing the NCT677x via Asus WMI functions.
> >
> > On mainboards that support this way of accessing the chip, the driver will
> > usually not work without this option since in these mainboards, ACPI will
> > mark the I/O port as used.
> >
> > Code uses ACPI firmware interface to commucate with sensors with ASUS
>
> communicate
>
> > motherboards:
> > * PRIME B460-PLUS,
> > * ROG CROSSHAIR VIII IMPACT,
> > * ROG STRIX B550-E GAMING,
> > * ROG STRIX B550-F GAMING,
> > * ROG STRIX B550-F GAMING (WI-FI),
> > * ROG STRIX Z490-I GAMING,
> > * TUF GAMING B550M-PLUS,
> > * TUF GAMING B550M-PLUS (WI-FI),
> > * TUF GAMING B550-PLUS,
> > * TUF GAMING X570-PLUS,
> > * TUF GAMING X570-PRO (WI-FI).
>
> ...
>
> > +static int asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
> > +{
>
> > +#if IS_ENABLED(CONFIG_ACPI_WMI)
>
> The idea behind IS_ENABLED() macro is that it may be used in C
> conditionals, like
>
> if (IS_ENABLED(...))

It can be and is used either way.

$ git grep "#if IS_ENABLED" | wc
   3126    6529  199841

$ git grep "if (IS_ENABLED" | wc
   1624    6871  120270

> > +       u32 args = bank | (reg << 8) | (val << 16);
> > +       struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
> > +       struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
> > +       acpi_status status;
> > +       union acpi_object *obj;
> > +       u32 tmp = 0;
>
> > +       obj = output.pointer;
> > +       if (obj && obj->type == ACPI_TYPE_INTEGER)
> > +               tmp = obj->integer.value;
> > +
> > +       if (retval)
> > +               *retval = tmp;
> > +
> > +       kfree(obj);
>
> > +       if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
>
> This is uninitialized tmp in case when no obj, or obj is of the wrong type.

In this situation, we know that the ACPI call succeeded. My assumption was
that this code explicitly checks for a specific error code returned from
the ASUS WMI code, which would be returned as integer. This is an additional
error check on top of previous error checks, and it looks perfectly valid to me.

Other WMI code doesn't check for errors other than "if (ACPI_FAILURE(status))".

> > +               return -ENODEV;
> > +       return 0;
> > +#else
> > +       return -EOPNOTSUPP;
> > +#endif
> > +}
>
> ...
>
> > +static u16 nct6775_wmi_read_value(struct nct6775_data *data, u16 reg)
> > +{
> > +       int res, word_sized = is_word_sized(data, reg);
> > +       u8 tmp;
> > +
> > +       nct6775_wmi_set_bank(data, reg);
> > +
> > +       nct6775_asuswmi_read(data->bank, reg, &tmp);
>
> > +       res = (tmp & 0xff);
>
> Too many parentheses.
> tnp is u8, ' & 0xff' is redundant.
>
> > +       if (word_sized) {
> > +               nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
> > +               res = (res << 8) + (tmp & 0xff);
>
> Ditto.
>
> > +       }
> > +       return res;
> > +}
> > +
> > +static int nct6775_wmi_write_value(struct nct6775_data *data, u16 reg, u16 value)
> > +{
> > +       int word_sized = is_word_sized(data, reg);
> > +
> > +       nct6775_wmi_set_bank(data, reg);
> > +
> > +       if (word_sized) {
>
> > +               nct6775_asuswmi_write(data->bank, (reg & 0xff),
>
> Too many parentheses
>
> > +                                     (value >> 8) & 0xff);
>
> ' & 0xff' part is redundant.
>
> > +               nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1,
> > +                                     value & 0xff);
> > +       } else {
> > +               nct6775_asuswmi_write(data->bank, (reg & 0xff), value);
> > +       }
> > +
> > +       return 0;
> > +}
>
> ...
>
> > +               err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
> > +                                  board_name);
>
> > +               if (err != -EINVAL) {
>
> I believe I commented on this in the way as
>
> if (err >= 0)
>
> The rationale behind is that you shouldn't really care what kind of
> error codes the API may return.
>
> > +                       /* if reading chip id via WMI succeeds, use WMI */
> > +                       if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp)) {
> > +                               pr_info("Using Asus WMI to access %#x chip.\n", tmp);
> > +                               access = access_asuswmi;
> > +                       } else {
> > +                               pr_err("Can't read ChipID by Asus WMI.\n");
> > +                       }
> > +               }