[PATCH v3 2/3] dt-bindings: remoteproc: qcom: Add SC7280 WPSS support

[Rakesh Pillai]

Add WPSS PIL loading support for SC7280 SoCs.

Signed-off-by: Rakesh Pillai <pillair@xxxxxxxxxxxxxx>
---
 .../bindings/remoteproc/qcom,hexagon-v56.yaml      | 88 +++++++++++++++++++++-
 1 file changed, 86 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
index 051da43..5674602 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,hexagon-v56.yaml
@@ -17,6 +17,7 @@ properties:
   compatible:
     enum:
       - qcom,qcs404-cdsp-pil
+      - qcom,sc7280-wpss-pil
       - qcom,sdm845-adsp-pil
 
   reg:
@@ -43,14 +44,14 @@ properties:
       - const: stop-ack
 
   clocks:
-    minItems: 7
+    minItems: 3
     maxItems: 8
     description:
       List of phandles and clock specifier pairs for the Hexagon,
       per clock-names below.
 
   clock-names:
-    minItems: 7
+    minItems: 3
     maxItems: 8
 
   power-domains:
@@ -58,6 +59,11 @@ properties:
     items:
       - description: CX power domain
 
+  power-domain-names:
+    minItems: 1
+    items:
+      - const: cx
+
   resets:
     minItems: 1
     maxItems: 2
@@ -78,6 +84,10 @@ properties:
       Phandle reference to a syscon representing TCSR followed by the
       three offsets within syscon for q6, modem and nc halt registers.
 
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
   qcom,smem-states:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: States used by the AP to signal the Hexagon core
@@ -117,6 +127,33 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc7280-wpss-pil
+    then:
+      properties:
+        interrupts-extended:
+          maxItems: 6
+          items:
+            - description: Watchdog interrupt
+            - description: Fatal interrupt
+            - description: Ready interrupt
+            - description: Handover interrupt
+            - description: Stop acknowledge interrupt
+            - description: Shutdown acknowledge interrupt
+        interrupt-names:
+          maxItems: 6
+          items:
+            - const: wdog
+            - const: fatal
+            - const: ready
+            - const: handover
+            - const: stop-ack
+            - const: shutdown-ack
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdm845-adsp-pil
     then:
       properties:
@@ -192,6 +229,25 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc7280-wpss-pil
+    then:
+      properties:
+        power-domains:
+          maxItems: 2
+          items:
+            - description: CX power domain
+            - description: MX power domain
+        power-domain-names:
+          maxItems: 2
+          items:
+            - const: cx
+            - const: mx
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdm845-adsp-pil
     then:
       properties:
@@ -219,6 +275,34 @@ allOf:
           items:
             - const: restart
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7280-wpss-pil
+    then:
+      properties:
+        resets:
+          items:
+            - description: AOSS restart
+            - description: PDC SYNC
+        reset-names:
+          items:
+            - const: restart
+            - const: pdc_sync
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-adsp-pil
+              - qcom,qcs404-cdsp-pil
+    then:
+      properties:
+        qcom,qmp: false
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.7.4