[RFT PATCH 3/9] usb: typec: tipd: Allow irq controller selection

[Sven Peter]

TI TPS6598x chips come with two separate i2c buses which each have an
independent interrupt controller. When only a single controller is
connected both can just be used.
On Apple M1 machines the secondary bus is however connected to the system
management controller and we must not modify its configuration. Prepare
for that by allowing to chose which interrupt controller(s) are used.

Signed-off-by: Sven Peter <sven@xxxxxxxxxxxxx>
---
 drivers/usb/typec/tipd/core.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
index 656020e7f533..c2c399722c37 100644
--- a/drivers/usb/typec/tipd/core.c
+++ b/drivers/usb/typec/tipd/core.c
@@ -78,6 +78,8 @@ static const char *const modes[] = {
 #define INVALID_CMD(_cmd_)		(_cmd_ == 0x444d4321)
 
 struct tps6598x_hw {
+	bool use_int1;
+	bool use_int2;
 };
 static const struct tps6598x_hw ti_tps6598x_data;
 
@@ -411,22 +413,28 @@ static const struct typec_operations tps6598x_ops = {
 static irqreturn_t tps6598x_interrupt(int irq, void *data)
 {
 	struct tps6598x *tps = data;
-	u64 event1;
-	u64 event2;
+	u64 event1 = 0;
+	u64 event2 = 0;
+	u64 event = 0;
 	u32 status, data_status;
 	u16 pwr_status;
 	int ret;
 
 	mutex_lock(&tps->lock);
 
-	ret = tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event1);
-	ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT2, &event2);
+	ret = 0;
+	if (tps->hw->use_int1)
+		ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT1, &event1);
+	if (tps->hw->use_int2)
+		ret |= tps6598x_read64(tps, TPS_REG_INT_EVENT2, &event2);
 	if (ret) {
 		dev_err(tps->dev, "%s: failed to read events\n", __func__);
 		goto err_unlock;
 	}
 	trace_tps6598x_irq(event1, event2);
 
+	event = event1 | event2;
+
 	ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
 	if (ret) {
 		dev_err(tps->dev, "%s: failed to read status\n", __func__);
@@ -434,7 +442,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
 	}
 	trace_tps6598x_status(status);
 
-	if ((event1 | event2) & TPS_REG_INT_POWER_STATUS_UPDATE) {
+	if (event & TPS_REG_INT_POWER_STATUS_UPDATE) {
 		ret = tps6598x_read16(tps, TPS_REG_POWER_STATUS, &pwr_status);
 		if (ret < 0) {
 			dev_err(tps->dev, "failed to read power status: %d\n", ret);
@@ -443,7 +451,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
 		trace_tps6598x_power_status(pwr_status);
 	}
 
-	if ((event1 | event2) & TPS_REG_INT_DATA_STATUS_UPDATE) {
+	if (event & TPS_REG_INT_DATA_STATUS_UPDATE) {
 		ret = tps6598x_read32(tps, TPS_REG_DATA_STATUS, &data_status);
 		if (ret < 0) {
 			dev_err(tps->dev, "failed to read data status: %d\n", ret);
@@ -453,7 +461,7 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
 	}
 
 	/* Handle plug insert or removal */
-	if ((event1 | event2) & TPS_REG_INT_PLUG_EVENT) {
+	if (event & TPS_REG_INT_PLUG_EVENT) {
 		if (status & TPS_STATUS_PLUG_PRESENT) {
 			ret = tps6598x_connect(tps, status);
 			if (ret)
@@ -465,8 +473,10 @@ static irqreturn_t tps6598x_interrupt(int irq, void *data)
 	}
 
 err_clear_ints:
-	tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1);
-	tps6598x_write64(tps, TPS_REG_INT_CLEAR2, event2);
+	if (tps->hw->use_int1)
+		tps6598x_write64(tps, TPS_REG_INT_CLEAR1, event1);
+	if (tps->hw->use_int2)
+		tps6598x_write64(tps, TPS_REG_INT_CLEAR2, event2);
 
 err_unlock:
 	mutex_unlock(&tps->lock);
@@ -744,6 +754,8 @@ static int tps6598x_remove(struct i2c_client *client)
 }
 
 static const struct tps6598x_hw ti_tps6598x_data = {
+	.use_int1 = true,
+	.use_int2 = true,
 };
 
 static const struct of_device_id tps6598x_of_match[] = {
-- 
2.25.1