Re: [PATCH V8 4/8] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes

[Stephen Boyd]

Quoting Rajesh Patil (2021-09-17 02:48:03)
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 2fbcb0a..a2a4d7e 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -536,24 +536,444 @@
>                 qupv3_id_0: geniqup@9c0000 {
>                         compatible = "qcom,geni-se-qup";
>                         reg = <0 0x009c0000 0 0x2000>;
> -                       clock-names = "m-ahb", "s-ahb";
>                         clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
>                                  <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +                       clock-names = "m-ahb", "s-ahb";
>                         #address-cells = <2>;
>                         #size-cells = <2>;
>                         ranges;
> +                       iommus = <&apps_smmu 0x123 0x0>;
>                         status = "disabled";
>
> +                       qup_opp_table: qup-opp-table {

Sorry to mislead you. I see now why it can't be here. qeniqup has
address cells and size cells not equal to zero, which means that every
child node of qeniqup should have a reg property. So this OPP table
needs to be moved to the root again (ugh).

> +                               compatible = "operating-points-v2";
> +
> +                               opp-75000000 {
> +                                       opp-hz = /bits/ 64 <75000000>;
> +                                       required-opps = <&rpmhpd_opp_low_svs>;
> +                               };
> +
> +                               opp-100000000 {
> +                                       opp-hz = /bits/ 64 <100000000>;
> +                                       required-opps = <&rpmhpd_opp_svs>;
> +                               };
> +
> +                               opp-128000000 {
> +                                       opp-hz = /bits/ 64 <128000000>;
> +                                       required-opps = <&rpmhpd_opp_nom>;
> +                               };
> +                       };
> +
> +                       i2c0: i2c@980000 {
> +                               compatible = "qcom,geni-i2c";
> +                               reg = <0 0x00980000 0 0x4000>;
> +                               clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
> +                               clock-names = "se";
> +                               pinctrl-names = "default";
[...]
>
>                 cnoc2: interconnect@1500000 {
> @@ -1574,11 +1994,311 @@
>                                 function = "qspi_data";
[...]
> +
> +                       qup_spi0_cs_gpio: qup-spi0-cs_gpio {

Please make it "qup_spi0_cs_gpio: qup-spi0-cs-gpio" as node names should
have dashes instead of underscores.

> +                               pins = "gpio3";