[PATCH v4 08/16] iio: adc: max1027: Ensure a default cnvst trigger configuration

[Miquel Raynal]

We don't expect the (hardware) cnvst trigger to be enabled at boot time,
this is a user choice made in sysfs and there is a dedicated callback to
enable/disable this trigger. Hence, we can just ensure it is disabled in
the probe at initialization time and then assume that whenever a
->read_raw() call happens, the trigger has been disabled and conversions
will start on register write.

Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
 drivers/iio/adc/max1027.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index b7cc77c2c01d..62570953653a 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -302,10 +302,6 @@ static int max1027_read_single_value(struct iio_dev *indio_dev,
 		return -EBUSY;
 	}
 
-	ret = max1027_enable_trigger(indio_dev, false);
-	if (ret)
-		return ret;
-
 	/* Configure conversion register with the requested chan */
 	st->reg = MAX1027_CONV_REG | MAX1027_CHAN(chan->channel) |
 		  MAX1027_NOSCAN;
@@ -557,6 +553,11 @@ static int max1027_probe(struct spi_device *spi)
 		return ret;
 	}
 
+	/* Assume conversion on register write for now */
+	ret = max1027_enable_trigger(indio_dev, false);
+	if (ret)
+		return ret;
+
 	return devm_iio_device_register(&spi->dev, indio_dev);
 }
 
-- 
2.27.0