[PATCH 5/7] mxser: move FIFO clearing to mxser_disable_and_clear_FIFO()

From: Jiri Slaby
Date: Wed Sep 22 2021 - 03:59:48 EST


This code is used on two places, make a helper for disabling and
clearing FIFOs. And demangle the too complicated 'if' by using a local
variable.

Signed-off-by: Jiri Slaby <jslaby@xxxxxxx>
---
drivers/tty/mxser.c | 26 ++++++++++++--------------
1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index c194a96bb14e..6913a1caa6f0 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -706,6 +706,16 @@ static void mxser_check_modem_status(struct tty_struct *tty,
mxser_handle_cts(tty, port, status);
}

+static void mxser_disable_and_clear_FIFO(struct mxser_port *info)
+{
+ u8 fcr = UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT;
+
+ if (info->board->must_hwid)
+ fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE;
+
+ outb(fcr, info->ioaddr + UART_FCR);
+}
+
static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
{
struct mxser_port *info = container_of(port, struct mxser_port, port);
@@ -730,13 +740,7 @@ static int mxser_activate(struct tty_port *port, struct tty_struct *tty)
* Clear the FIFO buffers and disable them
* (they will be reenabled in mxser_change_speed())
*/
- if (info->board->must_hwid)
- outb((UART_FCR_CLEAR_RCVR |
- UART_FCR_CLEAR_XMIT |
- MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR);
- else
- outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT),
- info->ioaddr + UART_FCR);
+ mxser_disable_and_clear_FIFO(info);

/*
* At this point there's no way the LSR could still be 0xFF;
@@ -824,13 +828,7 @@ static void mxser_shutdown_port(struct tty_port *port)
outb(0x00, info->ioaddr + UART_IER);

/* clear Rx/Tx FIFO's */
- if (info->board->must_hwid)
- outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT |
- MOXA_MUST_FCR_GDA_MODE_ENABLE,
- info->ioaddr + UART_FCR);
- else
- outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
- info->ioaddr + UART_FCR);
+ mxser_disable_and_clear_FIFO(info);

/* read data port to reset things */
(void) inb(info->ioaddr + UART_RX);
--
2.33.0