RE: [PATCH 0/6] nvmem: add "cell-type" property to support mac-address

[Joakim Zhang]

Gentle Ping...

Best Regards,
Joakim Zhang

> -----Original Message-----
> From: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> Sent: 2021年9月8日 18:03
> To: srinivas.kandagatla@xxxxxxxxxx; robh+dt@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>; kernel@xxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: [PATCH 0/6] nvmem: add "cell-type" property to support mac-address
> 
> This patch set adds "cell-type" property to parse mac address, take i.MX as an
> example, which need reverse byte for mac address.
> 
> Joakim Zhang (2):
>   arm64: dts: imx8mm: add "cell-type" property for mac-address
>   arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for
> FEC
> 
> Srinivas Kandagatla (4):
>   dt-bindings: nvmem: add cell-type to nvmem cells
>   nvmem: core: parse nvmem cell-type from device tree
>   nvmem: core: add nvmem cell post processing callback
>   nvmem: imx-ocotp: add support for post porcessing.
> 
>  .../devicetree/bindings/nvmem/nvmem.yaml      | 11 +++++++
>  arch/arm64/boot/dts/freescale/imx8mm.dtsi     |  3 +-
>  arch/arm64/boot/dts/freescale/imx8mn.dtsi     |  3 +-
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi     | 10 ++++++-
>  arch/arm64/boot/dts/freescale/imx8mq.dtsi     |  3 +-
>  drivers/nvmem/core.c                          | 12 ++++++++
>  drivers/nvmem/imx-ocotp.c                     | 30
> +++++++++++++++++++
>  include/dt-bindings/nvmem/nvmem.h             |  8 +++++
>  include/linux/nvmem-provider.h                |  5 ++++
>  9 files changed, 81 insertions(+), 4 deletions(-)  create mode 100644
> include/dt-bindings/nvmem/nvmem.h
> 
> --
> 2.17.1