[PATCH] eeprom: 93xx46: Add SPI device ID table

[Mark Brown]

Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding a SPI device ID table.

Fixes: 96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
---
 drivers/misc/eeprom/eeprom_93xx46.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c
index 29d8971ec558..660ee924f8b1 100644
--- a/drivers/misc/eeprom/eeprom_93xx46.c
+++ b/drivers/misc/eeprom/eeprom_93xx46.c
@@ -406,6 +406,23 @@ static const struct of_device_id eeprom_93xx46_of_table[] = {
 };
 MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
 
+static const struct spi_device_id eeprom_93xx46_spi_ids[] = {
+	{ .name = "eeprom-93xx46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46",
+	  .driver_data = (kernel_ulong_t)&at93c46_data, },
+	{ .name = "at93c46d",
+	  .driver_data = (kernel_ulong_t)&atmel_at93c46d_data, },
+	{ .name = "at93c56",
+	  .driver_data = (kernel_ulong_t)&at93c56_data, },
+	{ .name = "at93c66",
+	  .driver_data = (kernel_ulong_t)&at93c66_data, },
+	{ .name = "93lc46b",
+	  .driver_data = (kernel_ulong_t)&microchip_93lc46b_data, },
+	{}
+};
+MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table);
+
 static int eeprom_93xx46_probe_dt(struct spi_device *spi)
 {
 	const struct of_device_id *of_id =
@@ -555,6 +572,7 @@ static struct spi_driver eeprom_93xx46_driver = {
 	},
 	.probe		= eeprom_93xx46_probe,
 	.remove		= eeprom_93xx46_remove,
+	.id_table	= eeprom_93xx46_spi_ids,
 };
 
 module_spi_driver(eeprom_93xx46_driver);
-- 
2.20.1