[PATCH v2 00/11] gpio: msc313: Add gpio support for ssd20xd

[Daniel Palmer]

This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips, and then a bunch of DT wiring stuff so
that the LEDs on the M5 stack unitv2 work and it can control the
power switch for the USB connected.

Changes since v1:
  - Add a fix for the led binding to squash the warning about the
    activity trigger in the unitv2 dts.
  - Fix up the regulator node names so they pass dtb check

Daniel Palmer (11):
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  dt-bindings: leds: Document "activity" trigger
  gpio: msc313: Code clean ups
  gpio: msc313: Add support for SSD201 and SSD202D
  ARM: dts: mstar: Set gpio compatible for ssd20xd
  ARM: dts: mstar: unitv2: Wire up LEDs
  ARM: dts: mstar: unitv2: Add core regulator
  ARM: dts: mstar: unitv2: Add io regulator
  ARM: dts: mstar: unitv2: Add DRAM regulator
  ARM: dts: mstar: unitv2: Add wifi switch

 .../bindings/gpio/mstar,msc313-gpio.yaml      |   4 +-
 .../devicetree/bindings/leds/common.yaml      |   2 +
 .../dts/mstar-infinity2m-ssd202d-unitv2.dts   |  46 +++
 .../boot/dts/mstar-infinity2m-ssd20xd.dtsi    |   5 +
 drivers/gpio/gpio-msc313.c                    | 266 +++++++++++++++++-
 include/dt-bindings/gpio/msc313-gpio.h        |  71 +++++
 6 files changed, 389 insertions(+), 5 deletions(-)

-- 
2.33.0