Re: [PATCH] mmc: dw_mmc: Dont wait for DRTO on Write RSP error

From: Ulf Hansson
Date: Thu Sep 23 2021 - 14:50:17 EST


On Thu, 16 Sept 2021 at 07:59, Christian Löhle <CLoehle@xxxxxxxxxxxxxx> wrote:
>
> Only wait for DRTO on reads, otherwise the driver hangs.
>
> The driver prevents sending CMD12 on response errors like CRCs.
> According to the comment this is because some cards have problems
> with this during the UHS tuning sequence.
> Unfortunately this workaround currently also applies for any command
> with data.
> On reads this will set the drto timer which then triggers after a while.
> On writes this will not set any timer and the tasklet will not be
> scheduled again.
> I cannot attest for the UHS workarounds need, but even if so, it should
> at most apply to reads.
> I have observed many hangs when CMD25 response contained a CRC error.
> This patch fixes this without touching the actual UHS tuning workaround.
>
> Signed-off-by: Christian Loehle <cloehle@xxxxxxxxxxxxxx>

Applied for next and by adding a stable tag, thanks!

If you don't think we need the stable tag, please tell me.

Kind regards
Uffe


> ---
> drivers/mmc/host/dw_mmc.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
> index 6578cc64ae9e..22cf13dc799b 100644
> --- a/drivers/mmc/host/dw_mmc.c
> +++ b/drivers/mmc/host/dw_mmc.c
> @@ -2081,7 +2081,8 @@ static void dw_mci_tasklet_func(struct tasklet_struct *t)
> * delayed. Allowing the transfer to take place
> * avoids races and keeps things simple.
> */
> - if (err != -ETIMEDOUT) {
> + if (err != -ETIMEDOUT &&
> + host->dir_status == DW_MCI_RECV_STATUS) {
> state = STATE_SENDING_DATA;
> continue;
> }
> --
> 2.32.0
> Hyperstone GmbH | Line-Eid-Strasse 3 | 78467 Konstanz
> Managing Directors: Dr. Jan Peter Berns.
> Commercial register of local courts: Freiburg HRB381782
>