Re: [PATCH v2 3/3] drm/bridge: ti-sn65dsi86: Add NO_CONNECTOR support

[Laurent Pinchart]

Hi Rob,

On Thu, Sep 23, 2021 at 10:31:52AM -0700, Rob Clark wrote:
> On Wed, Sep 22, 2021 at 5:44 PM Laurent Pinchart wrote:
> > On Mon, Sep 20, 2021 at 03:58:00PM -0700, Rob Clark wrote:
> > > From: Rob Clark <robdclark@xxxxxxxxxxxx>
> > >
> > > Slightly awkward to fish out the display_info when we aren't creating
> > > own connector.  But I don't see an obvious better way.
> > >
> > > v2: Remove error return with NO_CONNECTOR flag
> > >
> > > Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
> > > ---
> > >  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 39 ++++++++++++++++++++-------
> > >  1 file changed, 29 insertions(+), 10 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > index 6154bed0af5b..94c94cc8a4d8 100644
> > > --- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > +++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
> > > @@ -667,11 +667,6 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
> > >                                                  .node = NULL,
> > >                                                };
> > >
> > > -     if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
> > > -             DRM_ERROR("Fix bridge driver to make connector optional!");
> > > -             return -EINVAL;
> > > -     }
> > > -
> > >       pdata->aux.drm_dev = bridge->dev;
> > >       ret = drm_dp_aux_register(&pdata->aux);
> > >       if (ret < 0) {
> > > @@ -679,9 +674,11 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
> > >               return ret;
> > >       }
> > >
> > > -     ret = ti_sn_bridge_connector_init(pdata);
> > > -     if (ret < 0)
> > > -             goto err_conn_init;
> > > +     if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
> > > +             ret = ti_sn_bridge_connector_init(pdata);
> > > +             if (ret < 0)
> > > +                     goto err_conn_init;
> > > +     }
> > >
> > >       /*
> > >        * TODO: ideally finding host resource and dsi dev registration needs
> > > @@ -743,7 +740,8 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge,
> > >  err_dsi_attach:
> > >       mipi_dsi_device_unregister(dsi);
> > >  err_dsi_host:
> > > -     drm_connector_cleanup(&pdata->connector);
> > > +     if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
> > > +             drm_connector_cleanup(&pdata->connector);
> >
> > I wonder if we actually need this. The connector gets attached to the
> > encoder, won't it be destroyed by the DRM core in the error path ?
> 
> This does not appear to be the case, we leak the connector if I remove
> this (and add a hack to trigger the error path)

OK.

> > >  err_conn_init:
> > >       drm_dp_aux_unregister(&pdata->aux);
> > >       return ret;
> > > @@ -792,9 +790,30 @@ static void ti_sn_bridge_set_dsi_rate(struct ti_sn65dsi86 *pdata)
> > >       regmap_write(pdata->regmap, SN_DSIA_CLK_FREQ_REG, val);
> > >  }
> > >
> > > +/*
> > > + * Find the connector and fish out the bpc from display_info.  It would
> > > + * be nice if we could get this instead from drm_bridge_state, but that
> > > + * doesn't yet appear to be the case.
> >
> > You already have a bus format in the bridge state, from which you can
> > derive the bpp. Could you give it a try ?
> 
> Possibly the bridge should be converted to ->atomic_enable(), etc..
> I'll leave that for another time

It should be fairly straightforward, and would avoid the hack below.

> > > + */
> > >  static unsigned int ti_sn_bridge_get_bpp(struct ti_sn65dsi86 *pdata)
> > >  {
> > > -     if (pdata->connector.display_info.bpc <= 6)
> > > +     struct drm_bridge *bridge = &pdata->bridge;
> > > +     struct drm_connector_list_iter conn_iter;
> > > +     struct drm_connector *connector;
> > > +     unsigned bpc = 0;
> > > +
> > > +     drm_connector_list_iter_begin(bridge->dev, &conn_iter);
> > > +     drm_for_each_connector_iter(connector, &conn_iter) {
> > > +             if (drm_connector_has_possible_encoder(connector, bridge->encoder)) {
> > > +                     bpc = connector->display_info.bpc;
> > > +                     break;
> > > +             }
> > > +     }
> > > +     drm_connector_list_iter_end(&conn_iter);
> > > +
> > > +     WARN_ON(bpc == 0);
> > > +
> > > +     if (bpc <= 6)
> > >               return 18;
> > >       else
> > >               return 24;

-- 
Regards,

Laurent Pinchart