Re: [PATCH v10] Bluetooth: btusb: Add support using different nvm for variant WCN6855 controller

[Marcel Holtmann]

Hi Zijun,

> the RF performance of wcn6855 soc chip from different foundries will be
> difference, so we should use different nvm to configure them.
> 
> Signed-off-by: Zijun Hu <zijuhu@xxxxxxxxxxxxxx>
> ---
> drivers/bluetooth/btusb.c | 50 +++++++++++++++++++++++++++++++++++------------
> 1 file changed, 37 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index 928cbfa4c42d..6dc645698e30 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3161,6 +3161,9 @@ static int btusb_set_bdaddr_wcn6855(struct hci_dev *hdev,
> #define QCA_DFU_TIMEOUT		3000
> #define QCA_FLAG_MULTI_NVM      0x80
> 
> +#define WCN6855_2_0_RAM_VERSION_GF 0x400c1200
> +#define WCN6855_2_1_RAM_VERSION_GF 0x400c1211
> +
> struct qca_version {
> 	__le32	rom_version;
> 	__le32	patch_version;
> @@ -3192,6 +3195,7 @@ static const struct qca_device_info qca_devices_table[] = {
> 	{ 0x00000302, 28, 4, 16 }, /* Rome 3.2 */
> 	{ 0x00130100, 40, 4, 16 }, /* WCN6855 1.0 */
> 	{ 0x00130200, 40, 4, 16 }, /* WCN6855 2.0 */
> +	{ 0x00130201, 40, 4, 16 }, /* WCN6855 2.1 */
> };
> 
> static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request,
> @@ -3346,6 +3350,31 @@ static int btusb_setup_qca_load_rampatch(struct hci_dev *hdev,
> 	return err;
> }
> 
> +static void btusb_generate_qca_nvm_name(char *fwname,
> +					size_t max_size,
> +					struct qca_version *ver,
> +					char *variant)
> +{

you are really not listening to review feedback. Use “const char *variant”.

> +	char *sep = (strlen(variant) == 0) ? "" : "_";

This is crazy.

> +	u16 board_id = le16_to_cpu(ver->board_id);
> +	u32 rom_version = le32_to_cpu(ver->rom_version);
> +
> +	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> +		/* if boardid equal 0, use default nvm without suffix */
> +		if (board_id == 0x0) {
> +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s.bin",
> +				rom_version, sep, variant);

			“qca/nvm_usb_%08x%s.bin”

> +		} else {
> +			snprintf(fwname, max_size, "qca/nvm_usb_%08x%s%s_%04x.bin",
> +				rom_version, sep, variant, board_id);

			""qca/nvm_usb_%08x%s_%04x.bin"
			
> +		}
> +	} else {
> +		snprintf(fwname, max_size, "qca/nvm_usb_%08x.bin",
> +			rom_version);
> +	}
> +
> +}
> +
> static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> 				    struct qca_version *ver,
> 				    const struct qca_device_info *info)
> @@ -3354,19 +3383,14 @@ static int btusb_setup_qca_load_nvm(struct hci_dev *hdev,
> 	char fwname[64];
> 	int err;
> 
> -	if (((ver->flag >> 8) & 0xff) == QCA_FLAG_MULTI_NVM) {
> -		/* if boardid equal 0, use default nvm without surfix */
> -		if (le16_to_cpu(ver->board_id) == 0x0) {
> -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> -				 le32_to_cpu(ver->rom_version));
> -		} else {
> -			snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x_%04x.bin",
> -				le32_to_cpu(ver->rom_version),
> -				le16_to_cpu(ver->board_id));
> -		}
> -	} else {
> -		snprintf(fwname, sizeof(fwname), "qca/nvm_usb_%08x.bin",
> -			 le32_to_cpu(ver->rom_version));
> +	switch (ver->ram_version) {
> +	case WCN6855_2_0_RAM_VERSION_GF:
> +	case WCN6855_2_1_RAM_VERSION_GF:
> +		btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, "gf");

			“_gf”

> +		break;
> +	default:
> +		btusb_generate_qca_nvm_name(fwname, sizeof(fwname), ver, "");

			“”

> +		break;
> 	}
> 
> 	err = request_firmware(&fw, fwname, &hdev->dev);

Regards

Marcel