[PATCH v3.1 1/3] arm64: dts: renesas: r8a779a0: Add DU support

[Kieran Bingham]

From: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>

Provide the device nodes for the DU on the V3U platforms.

Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@xxxxxxxxxxxxxxxx>
---
v2
 - Use a single clock specification for the whole DU.

v3:
 - Use 'du.0' clock name instead of 'du'

v3.1:
 - Add in missing reset-names (at last)
 - Use full renesas,vsps
---
 arch/arm64/boot/dts/renesas/r8a779a0.dtsi | 32 +++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index f9a882b34f82..4312597bf315 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -1251,6 +1251,38 @@ vspd1: vsp@fea28000 {
 			renesas,fcp = <&fcpvd1>;
 		};
 
+		du: display@feb00000 {
+			compatible = "renesas,du-r8a779a0";
+			reg = <0 0xfeb00000 0 0x40000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 411>;
+			clock-names = "du.0";
+			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
+			resets = <&cpg 411>;
+			reset-names = "du.0";
+			renesas,vsps = <&vspd0 0>, <&vspd1 0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					du_out_dsi0: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					du_out_dsi1: endpoint {
+					};
+				};
+			};
+		};
+
 		prr: chipid@fff00044 {
 			compatible = "renesas,prr";
 			reg = <0 0xfff00044 0 4>;
-- 
2.30.2