Re: [PATCH v3 7/7] eni_vdpa: add vDPA driver for Alibaba ENI

From: Jason Wang
Date: Sat Sep 25 2021 - 22:24:38 EST

Next message: Jason Wang: "Re: [PATCH v3 7/7] eni_vdpa: add vDPA driver for Alibaba ENI"
Previous message: Florian Fainelli: "Re: [PATCH net-next 0/5] brcm ASP 2.0 Ethernet controller"
Next in thread: Wu Zongyong: "Re: [PATCH v3 7/7] eni_vdpa: add vDPA driver for Alibaba ENI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Wed, Sep 22, 2021 at 8:47 PM Wu Zongyong
<wuzongyong@xxxxxxxxxxxxxxxxx> wrote:
>
> This patch adds a new vDPA driver for Alibaba ENI(Elastic Network
> Interface) which is build upon virtio 0.9.5 specification.
> And this driver doesn't support to run on BE host.
>
> Signed-off-by: Wu Zongyong <wuzongyong@xxxxxxxxxxxxxxxxx>
> ---
> drivers/vdpa/Kconfig | 8 +
> drivers/vdpa/Makefile | 1 +
> drivers/vdpa/alibaba/Makefile | 3 +
> drivers/vdpa/alibaba/eni_vdpa.c | 554 ++++++++++++++++++++++++++++++++
> 4 files changed, 566 insertions(+)
> create mode 100644 drivers/vdpa/alibaba/Makefile
> create mode 100644 drivers/vdpa/alibaba/eni_vdpa.c
>
> diff --git a/drivers/vdpa/Kconfig b/drivers/vdpa/Kconfig
> index 3d91982d8371..9587b9177b05 100644
> --- a/drivers/vdpa/Kconfig
> +++ b/drivers/vdpa/Kconfig
> @@ -78,4 +78,12 @@ config VP_VDPA
> help
> This kernel module bridges virtio PCI device to vDPA bus.
>
> +config ALIBABA_ENI_VDPA
> + tristate "vDPA driver for Alibaba ENI"
> + select VIRTIO_PCI_LEGACY_LIB
> + depends on PCI_MSI
> + help
> + VDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon
> + virtio 0.9.5 specification.
> +
> endif # VDPA
> diff --git a/drivers/vdpa/Makefile b/drivers/vdpa/Makefile
> index f02ebed33f19..15665563a7f4 100644
> --- a/drivers/vdpa/Makefile
> +++ b/drivers/vdpa/Makefile
> @@ -5,3 +5,4 @@ obj-$(CONFIG_VDPA_USER) += vdpa_user/
> obj-$(CONFIG_IFCVF) += ifcvf/
> obj-$(CONFIG_MLX5_VDPA) += mlx5/
> obj-$(CONFIG_VP_VDPA) += virtio_pci/
> +obj-$(CONFIG_ALIBABA_ENI_VDPA) += alibaba/
> diff --git a/drivers/vdpa/alibaba/Makefile b/drivers/vdpa/alibaba/Makefile
> new file mode 100644
> index 000000000000..ef4aae69f87a
> --- /dev/null
> +++ b/drivers/vdpa/alibaba/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_ALIBABA_ENI_VDPA) += eni_vdpa.o
> +
> diff --git a/drivers/vdpa/alibaba/eni_vdpa.c b/drivers/vdpa/alibaba/eni_vdpa.c
> new file mode 100644
> index 000000000000..b6eef696cec5
> --- /dev/null
> +++ b/drivers/vdpa/alibaba/eni_vdpa.c
> @@ -0,0 +1,554 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * vDPA bridge driver for Alibaba ENI(Elastic Network Interface)
> + *
> + * Copyright (c) 2021, Alibaba Inc. All rights reserved.
> + * Author: Wu Zongyong <wuzongyong@xxxxxxxxxxxxxxxxx>
> + *
> + */
> +
> +#include "linux/bits.h"
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/vdpa.h>
> +#include <linux/virtio.h>
> +#include <linux/virtio_config.h>
> +#include <linux/virtio_ring.h>
> +#include <linux/virtio_pci.h>
> +#include <linux/virtio_pci_legacy.h>
> +#include <uapi/linux/virtio_net.h>
> +
> +#define ENI_MSIX_NAME_SIZE 256
> +
> +#define ENI_ERR(pdev, fmt, ...) \
> + dev_err(&pdev->dev, "%s"fmt, "eni_vdpa: ", ##__VA_ARGS__)
> +#define ENI_DBG(pdev, fmt, ...) \
> + dev_dbg(&pdev->dev, "%s"fmt, "eni_vdpa: ", ##__VA_ARGS__)
> +#define ENI_INFO(pdev, fmt, ...) \
> + dev_info(&pdev->dev, "%s"fmt, "eni_vdpa: ", ##__VA_ARGS__)
> +
> +struct eni_vring {
> + void __iomem *notify;
> + char msix_name[ENI_MSIX_NAME_SIZE];
> + struct vdpa_callback cb;
> + int irq;
> +};
> +
> +struct eni_vdpa {
> + struct vdpa_device vdpa;
> + struct virtio_pci_legacy_device ldev;
> + struct eni_vring *vring;
> + struct vdpa_callback config_cb;
> + char msix_name[ENI_MSIX_NAME_SIZE];
> + int config_irq;
> + int queues;
> + int vectors;
> +};
> +
> +static struct eni_vdpa *vdpa_to_eni(struct vdpa_device *vdpa)
> +{
> + return container_of(vdpa, struct eni_vdpa, vdpa);
> +}
> +
> +static struct virtio_pci_legacy_device *vdpa_to_ldev(struct vdpa_device *vdpa)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> +
> + return &eni_vdpa->ldev;
> +}
> +
> +static u64 eni_vdpa_get_features(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> + u64 features = vp_legacy_get_features(ldev);
> +
> + features |= BIT_ULL(VIRTIO_F_ACCESS_PLATFORM);
> +
> + return features;

I wonder if the following can work with ENI:

-device virtio-net-pci,mrg_rxbuf=off

?

Thanks

> +}
> +
> +static int eni_vdpa_set_features(struct vdpa_device *vdpa, u64 features)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + vp_legacy_set_features(ldev, (u32)features);
> +
> + return 0;
> +}
> +
> +static u8 eni_vdpa_get_status(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return vp_legacy_get_status(ldev);
> +}
> +
> +static int eni_vdpa_get_vq_irq(struct vdpa_device *vdpa, u16 idx)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> + int irq = eni_vdpa->vring[idx].irq;
> +
> + if (irq == VIRTIO_MSI_NO_VECTOR)
> + return -EINVAL;
> +
> + return irq;
> +}
> +
> +static void eni_vdpa_free_irq(struct eni_vdpa *eni_vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + struct pci_dev *pdev = ldev->pci_dev;
> + int i;
> +
> + for (i = 0; i < eni_vdpa->queues; i++) {
> + if (eni_vdpa->vring[i].irq != VIRTIO_MSI_NO_VECTOR) {
> + vp_legacy_queue_vector(ldev, i, VIRTIO_MSI_NO_VECTOR);
> + devm_free_irq(&pdev->dev, eni_vdpa->vring[i].irq,
> + &eni_vdpa->vring[i]);
> + eni_vdpa->vring[i].irq = VIRTIO_MSI_NO_VECTOR;
> + }
> + }
> +
> + if (eni_vdpa->config_irq != VIRTIO_MSI_NO_VECTOR) {
> + vp_legacy_config_vector(ldev, VIRTIO_MSI_NO_VECTOR);
> + devm_free_irq(&pdev->dev, eni_vdpa->config_irq, eni_vdpa);
> + eni_vdpa->config_irq = VIRTIO_MSI_NO_VECTOR;
> + }
> +
> + if (eni_vdpa->vectors) {
> + pci_free_irq_vectors(pdev);
> + eni_vdpa->vectors = 0;
> + }
> +}
> +
> +static irqreturn_t eni_vdpa_vq_handler(int irq, void *arg)
> +{
> + struct eni_vring *vring = arg;
> +
> + if (vring->cb.callback)
> + return vring->cb.callback(vring->cb.private);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t eni_vdpa_config_handler(int irq, void *arg)
> +{
> + struct eni_vdpa *eni_vdpa = arg;
> +
> + if (eni_vdpa->config_cb.callback)
> + return eni_vdpa->config_cb.callback(eni_vdpa->config_cb.private);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int eni_vdpa_request_irq(struct eni_vdpa *eni_vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + struct pci_dev *pdev = ldev->pci_dev;
> + int i, ret, irq;
> + int queues = eni_vdpa->queues;
> + int vectors = queues + 1;
> +
> + ret = pci_alloc_irq_vectors(pdev, vectors, vectors, PCI_IRQ_MSIX);
> + if (ret != vectors) {
> + ENI_ERR(pdev,
> + "failed to allocate irq vectors want %d but %d\n",
> + vectors, ret);
> + return ret;
> + }
> +
> + eni_vdpa->vectors = vectors;
> +
> + for (i = 0; i < queues; i++) {
> + snprintf(eni_vdpa->vring[i].msix_name, ENI_MSIX_NAME_SIZE,
> + "eni-vdpa[%s]-%d\n", pci_name(pdev), i);
> + irq = pci_irq_vector(pdev, i);
> + ret = devm_request_irq(&pdev->dev, irq,
> + eni_vdpa_vq_handler,
> + 0, eni_vdpa->vring[i].msix_name,
> + &eni_vdpa->vring[i]);
> + if (ret) {
> + ENI_ERR(pdev, "failed to request irq for vq %d\n", i);
> + goto err;
> + }
> + vp_legacy_queue_vector(ldev, i, i);
> + eni_vdpa->vring[i].irq = irq;
> + }
> +
> + snprintf(eni_vdpa->msix_name, ENI_MSIX_NAME_SIZE, "eni-vdpa[%s]-config\n",
> + pci_name(pdev));
> + irq = pci_irq_vector(pdev, queues);
> + ret = devm_request_irq(&pdev->dev, irq, eni_vdpa_config_handler, 0,
> + eni_vdpa->msix_name, eni_vdpa);
> + if (ret) {
> + ENI_ERR(pdev, "failed to request irq for config vq %d\n", i);
> + goto err;
> + }
> + vp_legacy_config_vector(ldev, queues);
> + eni_vdpa->config_irq = irq;
> +
> + return 0;
> +err:
> + eni_vdpa_free_irq(eni_vdpa);
> + return ret;
> +}
> +
> +static void eni_vdpa_set_status(struct vdpa_device *vdpa, u8 status)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + u8 s = eni_vdpa_get_status(vdpa);
> +
> + if (status & VIRTIO_CONFIG_S_DRIVER_OK &&
> + !(s & VIRTIO_CONFIG_S_DRIVER_OK)) {
> + eni_vdpa_request_irq(eni_vdpa);
> + }
> +
> + vp_legacy_set_status(ldev, status);
> +
> + if (!(status & VIRTIO_CONFIG_S_DRIVER_OK) &&
> + (s & VIRTIO_CONFIG_S_DRIVER_OK))
> + eni_vdpa_free_irq(eni_vdpa);
> +}
> +
> +static int eni_vdpa_reset(struct vdpa_device *vdpa)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + u8 s = eni_vdpa_get_status(vdpa);
> +
> + vp_legacy_set_status(ldev, 0);
> +
> + if (s & VIRTIO_CONFIG_S_DRIVER_OK)
> + eni_vdpa_free_irq(eni_vdpa);
> +
> + return 0;
> +}
> +
> +static u16 eni_vdpa_get_vq_num_max(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return vp_legacy_get_queue_size(ldev, 0);
> +}
> +
> +static u16 eni_vdpa_get_vq_num_min(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return vp_legacy_get_queue_size(ldev, 0);
> +}
> +
> +static int eni_vdpa_get_vq_state(struct vdpa_device *vdpa, u16 qid,
> + struct vdpa_vq_state *state)
> +{
> + return -EOPNOTSUPP;
> +}
> +
> +static int eni_vdpa_set_vq_state(struct vdpa_device *vdpa, u16 qid,
> + const struct vdpa_vq_state *state)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> + const struct vdpa_vq_state_split *split = &state->split;
> +
> + /* ENI is build upon virtio-pci specfication which not support
> + * to set state of virtqueue. But if the state is equal to the
> + * device initial state by chance, we can let it go.
> + */
> + if (!vp_legacy_get_queue_enable(ldev, qid)
> + && split->avail_index == 0)
> + return 0;
> +
> + return -EOPNOTSUPP;
> +}
> +
> +
> +static void eni_vdpa_set_vq_cb(struct vdpa_device *vdpa, u16 qid,
> + struct vdpa_callback *cb)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> +
> + eni_vdpa->vring[qid].cb = *cb;
> +}
> +
> +static void eni_vdpa_set_vq_ready(struct vdpa_device *vdpa, u16 qid,
> + bool ready)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + /* ENI is a legacy virtio-pci device. This is not supported
> + * by specification. But we can disable virtqueue by setting
> + * address to 0.
> + */
> + if (!ready)
> + vp_legacy_set_queue_address(ldev, qid, 0);
> +}
> +
> +static bool eni_vdpa_get_vq_ready(struct vdpa_device *vdpa, u16 qid)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return vp_legacy_get_queue_enable(ldev, qid);
> +}
> +
> +static void eni_vdpa_set_vq_num(struct vdpa_device *vdpa, u16 qid,
> + u32 num)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> + struct pci_dev *pdev = ldev->pci_dev;
> + u16 n = vp_legacy_get_queue_size(ldev, qid);
> +
> + /* ENI is a legacy virtio-pci device which not allow to change
> + * virtqueue size. Just report a error if someone tries to
> + * change it.
> + */
> + if (num != n)
> + ENI_ERR(pdev,
> + "not support to set vq %u fixed num %u to %u\n",
> + qid, n, num);
> +}
> +
> +static int eni_vdpa_set_vq_address(struct vdpa_device *vdpa, u16 qid,
> + u64 desc_area, u64 driver_area,
> + u64 device_area)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> + u32 pfn = desc_area >> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
> +
> + vp_legacy_set_queue_address(ldev, qid, pfn);
> +
> + return 0;
> +}
> +
> +static void eni_vdpa_kick_vq(struct vdpa_device *vdpa, u16 qid)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> +
> + iowrite16(qid, eni_vdpa->vring[qid].notify);
> +}
> +
> +static u32 eni_vdpa_get_device_id(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return ldev->id.device;
> +}
> +
> +static u32 eni_vdpa_get_vendor_id(struct vdpa_device *vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = vdpa_to_ldev(vdpa);
> +
> + return ldev->id.vendor;
> +}
> +
> +static u32 eni_vdpa_get_vq_align(struct vdpa_device *vdpa)
> +{
> + return PAGE_SIZE;
> +}
> +
> +static size_t eni_vdpa_get_config_size(struct vdpa_device *vdpa)
> +{
> + return sizeof(struct virtio_net_config);
> +}
> +
> +
> +static void eni_vdpa_get_config(struct vdpa_device *vdpa,
> + unsigned int offset,
> + void *buf, unsigned int len)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + void __iomem *ioaddr = ldev->ioaddr +
> + VIRTIO_PCI_CONFIG_OFF(eni_vdpa->vectors) +
> + offset;
> + u8 *p = buf;
> + int i;
> +
> + for (i = 0; i < len; i++)
> + *p++ = ioread8(ioaddr + i);
> +}
> +
> +static void eni_vdpa_set_config(struct vdpa_device *vdpa,
> + unsigned int offset, const void *buf,
> + unsigned int len)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + void __iomem *ioaddr = ldev->ioaddr +
> + VIRTIO_PCI_CONFIG_OFF(eni_vdpa->vectors) +
> + offset;
> + const u8 *p = buf;
> + int i;
> +
> + for (i = 0; i < len; i++)
> + iowrite8(*p++, ioaddr + i);
> +}
> +
> +static void eni_vdpa_set_config_cb(struct vdpa_device *vdpa,
> + struct vdpa_callback *cb)
> +{
> + struct eni_vdpa *eni_vdpa = vdpa_to_eni(vdpa);
> +
> + eni_vdpa->config_cb = *cb;
> +}
> +
> +static const struct vdpa_config_ops eni_vdpa_ops = {
> + .get_features = eni_vdpa_get_features,
> + .set_features = eni_vdpa_set_features,
> + .get_status = eni_vdpa_get_status,
> + .set_status = eni_vdpa_set_status,
> + .reset = eni_vdpa_reset,
> + .get_vq_num_max = eni_vdpa_get_vq_num_max,
> + .get_vq_num_min = eni_vdpa_get_vq_num_min,
> + .get_vq_state = eni_vdpa_get_vq_state,
> + .set_vq_state = eni_vdpa_set_vq_state,
> + .set_vq_cb = eni_vdpa_set_vq_cb,
> + .set_vq_ready = eni_vdpa_set_vq_ready,
> + .get_vq_ready = eni_vdpa_get_vq_ready,
> + .set_vq_num = eni_vdpa_set_vq_num,
> + .set_vq_address = eni_vdpa_set_vq_address,
> + .kick_vq = eni_vdpa_kick_vq,
> + .get_device_id = eni_vdpa_get_device_id,
> + .get_vendor_id = eni_vdpa_get_vendor_id,
> + .get_vq_align = eni_vdpa_get_vq_align,
> + .get_config_size = eni_vdpa_get_config_size,
> + .get_config = eni_vdpa_get_config,
> + .set_config = eni_vdpa_set_config,
> + .set_config_cb = eni_vdpa_set_config_cb,
> + .get_vq_irq = eni_vdpa_get_vq_irq,
> +};
> +
> +
> +static u16 eni_vdpa_get_num_queues(struct eni_vdpa *eni_vdpa)
> +{
> + struct virtio_pci_legacy_device *ldev = &eni_vdpa->ldev;
> + u32 features = vp_legacy_get_features(ldev);
> + u16 num = 2;
> +
> + if (features & BIT_ULL(VIRTIO_NET_F_MQ)) {
> + __virtio16 max_virtqueue_pairs;
> +
> + eni_vdpa_get_config(&eni_vdpa->vdpa,
> + offsetof(struct virtio_net_config, max_virtqueue_pairs),
> + &max_virtqueue_pairs,
> + sizeof(max_virtqueue_pairs));
> + num = 2 * __virtio16_to_cpu(virtio_legacy_is_little_endian(),
> + max_virtqueue_pairs);
> + }
> +
> + if (features & BIT_ULL(VIRTIO_NET_F_CTRL_VQ))
> + num += 1;
> +
> + return num;
> +}
> +
> +static void eni_vdpa_free_irq_vectors(void *data)
> +{
> + pci_free_irq_vectors(data);
> +}
> +
> +#ifdef __LITTLE_ENDIAN
> +static int eni_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + struct device *dev = &pdev->dev;
> + struct eni_vdpa *eni_vdpa;
> + struct virtio_pci_legacy_device *ldev;
> + int ret, i;
> +
> + ret = pcim_enable_device(pdev);
> + if (ret)
> + return ret;
> +
> + eni_vdpa = vdpa_alloc_device(struct eni_vdpa, vdpa,
> + dev, &eni_vdpa_ops, NULL, false);
> + if (IS_ERR(eni_vdpa)) {
> + ENI_ERR(pdev, "failed to allocate vDPA structure\n");
> + return PTR_ERR(eni_vdpa);
> + }
> +
> + ldev = &eni_vdpa->ldev;
> + ldev->pci_dev = pdev;
> +
> + ret = vp_legacy_probe(ldev);
> + if (ret) {
> + ENI_ERR(pdev, "failed to probe legacy PCI device\n");
> + goto err;
> + }
> +
> + pci_set_master(pdev);
> + pci_set_drvdata(pdev, eni_vdpa);
> +
> + eni_vdpa->vdpa.dma_dev = &pdev->dev;
> + eni_vdpa->queues = eni_vdpa_get_num_queues(eni_vdpa);
> +
> + ret = devm_add_action_or_reset(dev, eni_vdpa_free_irq_vectors, pdev);
> + if (ret) {
> + ENI_ERR(pdev,
> + "failed for adding devres for freeing irq vectors\n");
> + goto err;
> + }
> +
> + eni_vdpa->vring = devm_kcalloc(&pdev->dev, eni_vdpa->queues,
> + sizeof(*eni_vdpa->vring),
> + GFP_KERNEL);
> + if (!eni_vdpa->vring) {
> + ret = -ENOMEM;
> + ENI_ERR(pdev, "failed to allocate virtqueues\n");
> + goto err;
> + }
> +
> + for (i = 0; i < eni_vdpa->queues; i++) {
> + eni_vdpa->vring[i].irq = VIRTIO_MSI_NO_VECTOR;
> + eni_vdpa->vring[i].notify = ldev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY;
> + }
> + eni_vdpa->config_irq = VIRTIO_MSI_NO_VECTOR;
> +
> + ret = vdpa_register_device(&eni_vdpa->vdpa, eni_vdpa->queues);
> + if (ret) {
> + ENI_ERR(pdev, "failed to register to vdpa bus\n");
> + goto err;
> + }
> +
> + return 0;
> +
> +err:
> + put_device(&eni_vdpa->vdpa.dev);
> + return ret;
> +}
> +#else
> +static int eni_vdpa_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> +{
> + ENI_ERR(pdev, "this driver not supported on BE host\n");
> + return -ENODEV;
> +}
> +#endif
> +
> +static void eni_vdpa_remove(struct pci_dev *pdev)
> +{
> + struct eni_vdpa *eni_vdpa = pci_get_drvdata(pdev);
> +
> + vdpa_unregister_device(&eni_vdpa->vdpa);
> + vp_legacy_remove(&eni_vdpa->ldev);
> +}
> +
> +static struct pci_device_id eni_pci_ids[] = {
> + { PCI_DEVICE_SUB(PCI_VENDOR_ID_REDHAT_QUMRANET,
> + VIRTIO_TRANS_ID_NET,
> + PCI_SUBVENDOR_ID_REDHAT_QUMRANET,
> + VIRTIO_ID_NET) },
> + { 0 },
> +};
> +
> +static struct pci_driver eni_vdpa_driver = {
> + .name = "alibaba-eni-vdpa",
> + .id_table = eni_pci_ids,
> + .probe = eni_vdpa_probe,
> + .remove = eni_vdpa_remove,
> +};
> +
> +module_pci_driver(eni_vdpa_driver);
> +
> +MODULE_AUTHOR("Wu Zongyong <wuzongyong@xxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Alibaba ENI vDPA driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.31.1
>

Next message: Jason Wang: "Re: [PATCH v3 7/7] eni_vdpa: add vDPA driver for Alibaba ENI"
Previous message: Florian Fainelli: "Re: [PATCH net-next 0/5] brcm ASP 2.0 Ethernet controller"
Next in thread: Wu Zongyong: "Re: [PATCH v3 7/7] eni_vdpa: add vDPA driver for Alibaba ENI"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]