[PATCH net-next 2/4] net: bcmgenet: remove old link state values

[Florian Fainelli]

From: Doug Berger <opendmb@xxxxxxxxx>

The PHY state machine has been fixed to only call the adjust_link
callback when the link state has changed. Therefore the old link
state variables are no longer needed to detect a change in link
state.

This commit effectively reverts
commit 5ad6e6c50899 ("net: bcmgenet: improve bcmgenet_mii_setup()")

Signed-off-by: Doug Berger <opendmb@xxxxxxxxx>
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
---
 .../net/ethernet/broadcom/genet/bcmgenet.c    |  5 ---
 .../net/ethernet/broadcom/genet/bcmgenet.h    |  4 ---
 drivers/net/ethernet/broadcom/genet/bcmmii.c  | 36 -------------------
 3 files changed, 45 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 23c7595d2a1d..3427f9ed7eb9 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -3408,11 +3408,6 @@ static void bcmgenet_netif_stop(struct net_device *dev)
 	 */
 	cancel_work_sync(&priv->bcmgenet_irq_work);
 
-	priv->old_link = -1;
-	priv->old_speed = -1;
-	priv->old_duplex = -1;
-	priv->old_pause = -1;
-
 	/* tx reclaim */
 	bcmgenet_tx_reclaim_all(dev);
 	bcmgenet_fini_dma(priv);
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.h b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
index 0a6d91b0f0aa..406249bc9fe5 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.h
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.h
@@ -606,10 +606,6 @@ struct bcmgenet_priv {
 	bool clk_eee_enabled;
 
 	/* PHY device variables */
-	int old_link;
-	int old_speed;
-	int old_duplex;
-	int old_pause;
 	phy_interface_t phy_interface;
 	int phy_addr;
 	int ext_phy;
diff --git a/drivers/net/ethernet/broadcom/genet/bcmmii.c b/drivers/net/ethernet/broadcom/genet/bcmmii.c
index 8a9d8ceaa5bf..8fce5878a7d9 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmmii.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmmii.c
@@ -33,34 +33,8 @@ void bcmgenet_mii_setup(struct net_device *dev)
 	struct bcmgenet_priv *priv = netdev_priv(dev);
 	struct phy_device *phydev = dev->phydev;
 	u32 reg, cmd_bits = 0;
-	bool status_changed = false;
-
-	if (priv->old_link != phydev->link) {
-		status_changed = true;
-		priv->old_link = phydev->link;
-	}
 
 	if (phydev->link) {
-		/* check speed/duplex/pause changes */
-		if (priv->old_speed != phydev->speed) {
-			status_changed = true;
-			priv->old_speed = phydev->speed;
-		}
-
-		if (priv->old_duplex != phydev->duplex) {
-			status_changed = true;
-			priv->old_duplex = phydev->duplex;
-		}
-
-		if (priv->old_pause != phydev->pause) {
-			status_changed = true;
-			priv->old_pause = phydev->pause;
-		}
-
-		/* done if nothing has changed */
-		if (!status_changed)
-			return;
-
 		/* speed */
 		if (phydev->speed == SPEED_1000)
 			cmd_bits = CMD_SPEED_1000;
@@ -102,10 +76,6 @@ void bcmgenet_mii_setup(struct net_device *dev)
 			reg |= CMD_TX_EN | CMD_RX_EN;
 		}
 		bcmgenet_umac_writel(priv, reg, UMAC_CMD);
-	} else {
-		/* done if nothing has changed */
-		if (!status_changed)
-			return;
 	}
 
 	phy_print_status(phydev);
@@ -294,12 +264,6 @@ int bcmgenet_mii_probe(struct net_device *dev)
 	if (priv->internal_phy)
 		phy_flags = priv->gphy_rev;
 
-	/* Initialize link state variables that bcmgenet_mii_setup() uses */
-	priv->old_link = -1;
-	priv->old_speed = -1;
-	priv->old_duplex = -1;
-	priv->old_pause = -1;
-
 	/* This is an ugly quirk but we have not been correctly interpreting
 	 * the phy_interface values and we have done that across different
 	 * drivers, so at least we are consistent in our mistakes.
-- 
2.25.1