[PATCH] arm64: dts: qcom: sdm630-nile: Correct regulator label name

[Shawn Guo]

29.5V (29p5) is obviously wrong for regulator l4 and l5.  Correct them
to be 2.95V (2p95).  No functional change.

Signed-off-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
index 849900e8b80e..11d0a8c1cf35 100644
--- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi
@@ -308,7 +308,7 @@
 			regulator-allow-set-load;
 		};
 
-		vreg_l4b_29p5: l4 {
+		vreg_l4b_2p95: l4 {
 			regulator-min-microvolt = <2944000>;
 			regulator-max-microvolt = <2952000>;
 			regulator-enable-ramp-delay = <250>;
@@ -327,7 +327,7 @@
 		 * Tighten the range to 1.8-3.328 (closest to 3.3) to
 		 * make the mmc driver happy.
 		 */
-		vreg_l5b_29p5: l5 {
+		vreg_l5b_2p95: l5 {
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <3328000>;
 			regulator-enable-ramp-delay = <250>;
@@ -559,14 +559,14 @@
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
 
-	vmmc-supply = <&vreg_l4b_29p5>;
+	vmmc-supply = <&vreg_l4b_2p95>;
 	vqmmc-supply = <&vreg_l8a_1p8>;
 };
 
 &sdhc_2 {
 	status = "okay";
 
-	vmmc-supply = <&vreg_l5b_29p5>;
+	vmmc-supply = <&vreg_l5b_2p95>;
 	vqmmc-supply = <&vreg_l2b_2p95>;
 };
 
-- 
2.17.1