[PATCH 06/10] i2c: pasemi: Move common reset code to own function

[Sven Peter]

Split out common reset call to its own function so that we
can later add support for selecting the clock frequency
and an additional enable bit found in newer revisions.

Signed-off-by: Sven Peter <sven@xxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-pasemi-core.c | 15 +++++++++------
 1 file changed, 9 insertions(+), 6 deletions(-)

diff --git a/drivers/i2c/busses/i2c-pasemi-core.c b/drivers/i2c/busses/i2c-pasemi-core.c
index 3eda5e375fa2..7c6715f5dbb8 100644
--- a/drivers/i2c/busses/i2c-pasemi-core.c
+++ b/drivers/i2c/busses/i2c-pasemi-core.c
@@ -61,6 +61,12 @@ static inline int reg_read(struct pasemi_smbus *smbus, int reg)
 #define TXFIFO_WR(smbus, reg)	reg_write((smbus), REG_MTXFIFO, (reg))
 #define RXFIFO_RD(smbus)	reg_read((smbus), REG_MRXFIFO)
 
+static void pasemi_reset(struct pasemi_smbus *smbus)
+{
+	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
+		  (CLK_100K_DIV & CTL_CLK_M)));
+}
+
 static void pasemi_smb_clear(struct pasemi_smbus *smbus)
 {
 	unsigned int status;
@@ -135,8 +141,7 @@ static int pasemi_i2c_xfer_msg(struct i2c_adapter *adapter,
 	return 0;
 
  reset_out:
-	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
-		  (CLK_100K_DIV & CTL_CLK_M)));
+	pasemi_reset(smbus);
 	return err;
 }
 
@@ -302,8 +307,7 @@ static int pasemi_smb_xfer(struct i2c_adapter *adapter,
 	return 0;
 
  reset_out:
-	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
-		  (CLK_100K_DIV & CTL_CLK_M)));
+	pasemi_reset(smbus);
 	return err;
 }
 
@@ -335,8 +339,7 @@ int pasemi_i2c_common_probe(struct pasemi_smbus *smbus)
 	/* set up the sysfs linkage to our parent device */
 	smbus->adapter.dev.parent = smbus->dev;
 
-	reg_write(smbus, REG_CTL, (CTL_MTR | CTL_MRR |
-		  (CLK_100K_DIV & CTL_CLK_M)));
+	pasemi_reset(smbus);
 
 	error = i2c_add_adapter(&smbus->adapter);
 	if (error)
-- 
2.25.1