Re: [PATCH v6 1/3] iio: imx8qxp-adc: Add driver support for NXP IMX8QXP ADC

[Cai Huoqing]

On 26 9月 21 12:41:37, Jonathan Cameron wrote:
> On Sat, 25 Sep 2021 10:05:45 +0800
> Cai Huoqing <caihuoqing@xxxxxxxxx> wrote:
> 
> > The NXP i.MX 8QuadXPlus SOC has a new ADC IP, so add
> > driver support for this ADC.
> > 
> > Signed-off-by: Cai Huoqing <caihuoqing@xxxxxxxxx>
Hi Jonathan
Thanks for your feedback.
> Hi Cai Huoqing,
> 
> Having had a 'final' read through of the driver, I am basically happy
> to merge this after Fabio has had time for another look (plus anyone else
> who wishes to of course!) 
> 
> There were a few minor things inline though that I'll tidy up whilst applying.
Feel free to fix these directly.
> If you do a v7 for some other reason please sort these out as well.
Sure, if v7 is needed for other issue, I will add these changes BTW.

Many thanks,
Cai

> 
> Thanks,
> 
> Jonathan
> 
> ...
> 
> > +#define IMX8QXP_ADR_ADC_TCTRL(tid)	(0xc0 + tid * 4)
> > +#define IMX8QXP_ADR_ADC_CMDH(cid)	(0x100 + cid * 8)
> > +#define IMX8QXP_ADR_ADC_CMDL(cid)	(0x104 + cid * 8)
> 
> In macros, it is always a good idea to put brackets around
> any use of parameters so as to avoid potential odd issues
> due to operator precedence.
> 
> (0xc0 + (tid) * 4)
> 
> > +#define IMX8QXP_ADR_ADC_RESFIFO		0x300
> > +#define IMX8QXP_ADR_ADC_TST		0xffc
> 
> ...
> 
> > +
> > +struct imx8qxp_adc {
> > +	struct device *dev;
> > +	void __iomem *regs;
> > +	struct clk *clk;
> > +	struct clk *ipg_clk;
> > +	struct regulator *vref;
> > +	struct mutex lock;
> 
> A lock should have documentation to identify what it's precise scope is.
> I can add
> 
> /* Serialise ADC channel reads */
> above the lock definition whilst applying if you aren't doing a v7 for
> other reasons.
> 
> > +	struct completion completion;
> > +};
> ...
> 
> 
> > +
> > +static irqreturn_t imx8qxp_adc_isr(int irq, void *dev_id)
> > +{
> > +	struct imx8qxp_adc *adc = dev_id;
> > +
> 
> Really minor, but the blank line here doesn't help readability much and
> is inconsistent with the rest of the driver.  I might remove this whilst
> applying if nothing else comes up.
> 
> > +	u32 fifo_count;
> > +
> > +	fifo_count = FIELD_GET(IMX8QXP_ADC_FCTRL_FCOUNT_MASK,
> > +			       readl(adc->regs + IMX8QXP_ADR_ADC_FCTRL));
> > +
> > +	if (fifo_count)
> > +		complete(&adc->completion);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> ...