Re: [REGRESSION] nvme: code command_id with a genctr for use-after-free validation crashes apple T2 SSD

[Sven Peter]

Hi,


On Mon, Sep 27, 2021, at 06:51, Aditya Garg wrote:
> I am getting the same error.
>
> ________________________________________
> From: Orlando Chamberlain <redecorating@xxxxxxxxxxxxxx>
> Sent: Monday, September 27, 2021 4:22 AM
> To: Sagi Grimberg; Aditya Garg; kbusch@xxxxxxxxxx
> Cc: linux-nvme@xxxxxxxxxxxxxxxxxxx; regressions@xxxxxxxxxxxxxxx; 
> hare@xxxxxxx; dwagner@xxxxxxx; hch@xxxxxx
> Subject: Re: [REGRESSION] nvme: code command_id with a genctr for 
> use-after-free validation crashes apple T2 SSD
>
> On 26/9/21 18:44, Sagi Grimberg wrote:
>>
>>> I checked out the proposal sent by Orlando Chamberlain to replace NVME_QUIRK_SHARED_TAGS , by NVME_QUIRK_SHARED_TAGS | given in the patch on http://lists.infradead.org/pipermail/linux-nvme/2021-September/027665.html. The , still causes panics to the T2 as described before. In the case of |, the kernel boots correctly without panicking the T2, but in case we are having Linux on an External Drive, which is my case, then the internal SSD doesn't seem to be recognised at all. I've tested the patch on 5.14.7.
>>
>> That sounds like a separate issue, because with this patch applied,
>> all tags should be within the queue entry range (with generation
>> set to 0 always).
>>
>> Is it possible that the io_queue_depth is being set to something
>> that exceeds NVME_PCI_MAX_QUEUE_SIZE (4095) ? the default is 1024
>>
> I've been able to reproduce it by using the same kernel Aditya is using:
> https://github.com/AdityaGarg8/T2-Big-Sur-Ubuntu-Kernel/actions/runs/1275383460
>
> From the initramfs:
>
> # dmesg | grep nvme
> nvme nvme0: pci function 0000:04:00.0
> nvme nvme0: 1/0/0 default/read/poll queues
> nvme nvme0: Identify NS List failed (status=0xb)
> nvme nvme0: LightNVM init failure

Maybe I should've just submitted the quirks required for the M1 already...
The ANS2 firmware on there doesn't support the vanilla nvme_scan_ns_list
call. That should not break anything though because core.c falls back to
nvme_scan_ns_sequential in that case which does work. It just results
in that "Identify NS List failed (status=0xb)" error message.

Not sure where that LightNVM failure comes from though. Afaict lightnvm has been 
removed from 5.15 and shouldn't be used for the Apple controller anyway.

Sven