Re: [v5,5/9] dt-bindings: pinctrl: update bindings for MT7986 SoC

[Rob Herring]

On Mon, 27 Sep 2021 10:34:19 +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver. The
> difference of pinctrl between mt7986a and mt7986b is that pin-41 to pin-65
> do not exist on mt7986b
> 
> Signed-off-by: Sam Shih <sam.shih@xxxxxxxxxxxx>
> 
> ---
> v5 : fixed yamllint warnings/errors
> v4 : used yaml format instead of txt format document
> v3 : make mt7986 pinctrl bindings as a separate file
> v2 : deleted the redundant description of mt7986a/mt7986b
> ---
>  .../pinctrl/mediatek,mt7986-pinctrl.yaml      | 353 ++++++++++++++++++
>  1 file changed, 353 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:25.13-32.43: Warning (reg_format): /example-0/soc/pinctrl@1001f000:reg: property has invalid length (128 bytes) (#address-cells == 2, #size-cells == 1)
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #address-cells value
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dts:23.33-58.13: Warning (avoid_default_addr_size): /example-0/soc/pinctrl@1001f000: Relying on default #size-cells value
Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: Warning (unique_unit_address): Failed prerequisite 'avoid_default_addr_size'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.example.dt.yaml: pinctrl@1001f000: 'gpio-ranges' does not match any of the regexes: '-[0-9]+$', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1533169

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.