Re: [PATCH] arm64: dts: sc7180: Factor out ti-sn65dsi86 support

[Stephen Boyd]

Quoting Philip Chen (2021-09-24 16:54:13)
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
> new file mode 100644
> index 000000000000..7b1034a5a8e9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
> @@ -0,0 +1,87 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +&dsi0_out {
> +       remote-endpoint = <&sn65dsi86_in>;
> +       data-lanes = <0 1 2 3>;
> +};
> +
> +&edp_brij_i2c {
> +       sn65dsi86_bridge: bridge@2d {
> +               compatible = "ti,sn65dsi86";
> +               reg = <0x2d>;
> +               pinctrl-names = "default";
> +               pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;

Why not move edp_brij_en as well? I think you want to reuse the node
name for the other bridge, but it doesn't make sense unless that other
patch is part of this series.

> +               gpio-controller;
> +               #gpio-cells = <2>;
> +
> +               interrupt-parent = <&tlmm>;
> +               interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> +
> +               enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;