Re: [PATCH] arm64: dts: sc7180: Factor out ti-sn65dsi86 support
From: Bjorn Andersson
Date: Mon Sep 27 2021 - 18:08:58 EST
On Fri 24 Sep 18:54 CDT 2021, Philip Chen wrote:
> Factor out ti-sn65dsi86 edp bridge as a separate dts fragment.
> This helps us introduce the second source edp bridge later.
>
I'd prefer to see the second patch in this series to conclude that this
is the right approach.
Regards,
Bjorn
> Signed-off-by: Philip Chen <philipchen@xxxxxxxxxxxx>
> ---
>
> .../boot/dts/qcom/sc7180-trogdor-coachz.dtsi | 1 +
> .../boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 1 +
> .../boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 1 +
> .../arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 1 +
> .../dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi | 87 +++++++++++++++++++
> arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 81 -----------------
> 6 files changed, 91 insertions(+), 81 deletions(-)
> create mode 100644 arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
> index a758e4d22612..1d13fba3bd2f 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi
> @@ -11,6 +11,7 @@
> ap_h1_spi: &spi0 {};
>
> #include "sc7180-trogdor.dtsi"
> +#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
>
> /* Deleted nodes from trogdor.dtsi */
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
> index 00535aaa43c9..27b26a782af9 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi
> @@ -11,6 +11,7 @@
> ap_h1_spi: &spi0 {};
>
> #include "sc7180-trogdor.dtsi"
> +#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
>
> &ap_sar_sensor {
> semtech,cs0-ground;
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
> index a246dbd74cc1..e7c7cad14989 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi
> @@ -11,6 +11,7 @@
> ap_h1_spi: &spi0 {};
>
> #include "sc7180-trogdor.dtsi"
> +#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
>
> / {
> thermal-zones {
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
> index 2b522f9e0d8f..457c25499863 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
> @@ -13,6 +13,7 @@
> ap_h1_spi: &spi0 {};
>
> #include "sc7180-trogdor.dtsi"
> +#include "sc7180-trogdor-ti-sn65dsi86.dtsi"
>
> / {
> model = "Google Trogdor (rev1+)";
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
> new file mode 100644
> index 000000000000..7b1034a5a8e9
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi
> @@ -0,0 +1,87 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Google Trogdor dts fragment for the boards with TI sn65dsi86 edp bridge
> + *
> + * Copyright 2021 Google LLC.
> + */
> +
> +&dsi0_out {
> + remote-endpoint = <&sn65dsi86_in>;
> + data-lanes = <0 1 2 3>;
> +};
> +
> +&edp_brij_i2c {
> + sn65dsi86_bridge: bridge@2d {
> + compatible = "ti,sn65dsi86";
> + reg = <0x2d>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> +
> + enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
> +
> + vpll-supply = <&pp1800_edp_vpll>;
> + vccio-supply = <&pp1800_brij_vccio>;
> + vcca-supply = <&pp1200_brij>;
> + vcc-supply = <&pp1200_brij>;
> +
> + clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
> + clock-names = "refclk";
> +
> + no-hpd;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + sn65dsi86_in: endpoint {
> + remote-endpoint = <&dsi0_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + sn65dsi86_out: endpoint {
> + data-lanes = <0 1>;
> + remote-endpoint = <&panel_in_edp>;
> + };
> + };
> + };
> +
> + aux-bus {
> + panel: panel {
> + /* Compatible will be filled in per-board */
> + power-supply = <&pp3300_dx_edp>;
> + backlight = <&backlight>;
> + hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> +
> + port {
> + panel_in_edp: endpoint {
> + remote-endpoint = <&sn65dsi86_out>;
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&tlmm {
> + edp_brij_irq: edp-brij-irq {
> + pinmux {
> + pins = "gpio11";
> + function = "gpio";
> + };
> +
> + pinconf {
> + pins = "gpio11";
> + drive-strength = <2>;
> + bias-pull-down;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> index 0f2b3c00e434..5ad3f15652d5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
> @@ -602,15 +602,6 @@ &camcc {
> &dsi0 {
> status = "okay";
> vdda-supply = <&vdda_mipi_dsi0_1p2>;
> -
> - ports {
> - port@1 {
> - endpoint {
> - remote-endpoint = <&sn65dsi86_in>;
> - data-lanes = <0 1 2 3>;
> - };
> - };
> - };
> };
>
> &dsi_phy {
> @@ -621,65 +612,6 @@ &dsi_phy {
> edp_brij_i2c: &i2c2 {
> status = "okay";
> clock-frequency = <400000>;
> -
> - sn65dsi86_bridge: bridge@2d {
> - compatible = "ti,sn65dsi86";
> - reg = <0x2d>;
> - pinctrl-names = "default";
> - pinctrl-0 = <&edp_brij_en>, <&edp_brij_irq>;
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-parent = <&tlmm>;
> - interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
> -
> - enable-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
> -
> - vpll-supply = <&pp1800_edp_vpll>;
> - vccio-supply = <&pp1800_brij_vccio>;
> - vcca-supply = <&pp1200_brij>;
> - vcc-supply = <&pp1200_brij>;
> -
> - clocks = <&rpmhcc RPMH_LN_BB_CLK3>;
> - clock-names = "refclk";
> -
> - no-hpd;
> -
> - ports {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - port@0 {
> - reg = <0>;
> - sn65dsi86_in: endpoint {
> - remote-endpoint = <&dsi0_out>;
> - };
> - };
> -
> - port@1 {
> - reg = <1>;
> - sn65dsi86_out: endpoint {
> - data-lanes = <0 1>;
> - remote-endpoint = <&panel_in_edp>;
> - };
> - };
> - };
> -
> - aux-bus {
> - panel: panel {
> - /* Compatible will be filled in per-board */
> - power-supply = <&pp3300_dx_edp>;
> - backlight = <&backlight>;
> - hpd-gpios = <&sn65dsi86_bridge 2 GPIO_ACTIVE_HIGH>;
> -
> - port {
> - panel_in_edp: endpoint {
> - remote-endpoint = <&sn65dsi86_out>;
> - };
> - };
> - };
> - };
> - };
> };
>
> ap_sar_sensor_i2c: &i2c5 {
> @@ -1245,19 +1177,6 @@ pinconf {
> };
> };
>
> - edp_brij_irq: edp-brij-irq {
> - pinmux {
> - pins = "gpio11";
> - function = "gpio";
> - };
> -
> - pinconf {
> - pins = "gpio11";
> - drive-strength = <2>;
> - bias-pull-down;
> - };
> - };
> -
> en_pp3300_codec: en-pp3300-codec {
> pinmux {
> pins = "gpio83";
> --
> 2.33.0.685.g46640cef36-goog
>