Re: [PATCH v4 03/10] dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema

[H. Nikolaus Schaller]

> Am 28.09.2021 um 11:18 schrieb Maxime Ripard <maxime@xxxxxxxxxx>:
> 
> On Tue, Sep 28, 2021 at 10:59:45AM +0200, H. Nikolaus Schaller wrote:
>>>> +properties:
>>>> +  compatible:
>>>> +    items:
>>>> +      - const: ingenic,jz4780-dw-hdmi
>>> 
>>> This can just be a const, there's no need for the items
>> 
>> Maybe starting with an enum is better if more compatible strings are to be added.
> 
> it's still fairly easy to change if needed, there's no need to confuse
> anyone.
> 
>>> 
>>>> +  reg-io-width:
>>>> +    const: 4
>>> 
>>> If it's fixed, why do you need it in the first place?
>> 
>> There is a fixed default of 1 if not specified.
> 
> My point was more about why do you need to have that property at all?
> Can't you just drop it and assume that the register width is 32 bits if
> it's all you will ever run on?

No, please see bridge/synopsys,dw-hdmi.yaml where it is derived from:

  reg-io-width:
    description:
      Width (in bytes) of the registers specified by the reg property.
    allOf:
      - $ref: /schemas/types.yaml#/definitions/uint32
      - enum: [1, 4]
    default: 1

Other bindings define it explicitly to be 4, e.g.

Documentation//devicetree/bindings/display/intel,keembay-msscam.yaml:  reg-io-width:
Documentation//devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yaml:  reg-io-width:

Therefore I'd assume that a regmap is not properly set up
if we don't require the DTS to include it with const: 4.

> 
>>>> +  clocks:
>>>> +    maxItems: 2
>>>> +    description: Clock specifiers for isrf and iahb clocks
>>> 
>>> This can be defined as
>>> 
>>> clocks:
>>> items:
>>>   - description: isrf
>>>   - description: iahb
>>> 
>>> A better description about what these clocks are would be nice as well
>> 
>> Generally I see that this all is nowadays not independent of
>> 
>> Documentation/devicetree/bindings/display/bridge/synopsys,dw-hdmi.yaml
>> 
>> where there is already a description.
> 
> Ok, good then
> 
>> On the other hand every SoC specialization runs its own copy. e.g.
>> 
>> Documentation/devicetree/bindings/display/imx/fsl,imx6-hdmi.yaml
>> Documentation/devicetree/bindings/display/rockchip/rockchip,dw-hdmi.yam
>> 
>>> 
>>>> +  clock-names:
>>>> +    items:
>>>> +      - const: isfr
>>> 
>>> Is it isfr or isrf?
>> 
>> isfr. Seems to be a typo in the description. See
>> bridge/synopsys,dw-hdmi.yaml#
>> 
>> One question to the yaml specialists:
>> 
>> since ../bridge/synopsys,dw-hdmi.yaml# already defines this, do we
>> have to repeat? Or can we reduce to just the changes?
> 
> If you add the ref you mentionned above, you don't have to repeat

Nice. It defines:

  clocks:
    minItems: 2
    maxItems: 5
    items:
      - description: The bus clock for either AHB and APB
      - description: The internal register configuration clock
    additionalItems: true

> yourself indeed. You can just put clock-names: true

Or should we do

  clocks:
    maxItems: 2
    additionalItems: false

> 
>> [I am still not familiar enough with the yaml stuff to understand if
>> it has sort of inheritance like device tree include files, so that you
>> just have to change relevant properties]
> 
> Kind of, but not entirely. schemas are all applied separately, unlike DT
> includes that will just expand to one big DT. In practice, it means that
> your device must validate against all the schemas, not just the sum of
> them.
> 
> For example, if you have a generic schema that has:
> 
> properties:
>  compatible:
>    const: vendor,my-generic-compatible
> 
> 
> and your schema that extends the generic binding, with a ref to the
> generic one that has:
> 
> properties:
>  compatible:
>    items:
>      - const: other-vendor,my-device-compatible
>      - const: vendor,my-generic-compatible
> 
> 
> It will still fail since the generic schema expects only a single
> compatible, whereas your device would have two.

Ok, I see. it is not a simple "overwrite" rule.

> 
>>> 
>>>> +      - const: iahb
>> 
>> would it make sense to add additionalItems: false here?
>> 
>> In the jz4780 case there are just two clocks while other specializations
>> use more and synopsys,dw-hdmi.yaml# defines additionalItems: true.
> 
> If you want to refine the generic one, and it's all the clocks you ever
> expect then there's no need for additionalItems

Ok.

> 
>>> 
>>>> +    description: An I2C interface if the internal DDC I2C driver is not to be used
>>>> +  ports: true
>>> 
>>> If there's a single port, you don't need ports
>> 
>> There can be two ports - one for input from LCDC and one
>> for output (HDMI connector). But explicitly defining an output
>> port is optional to some extent (depending on driver structure).
> 
> This needs to be defined then (and port@0 made mandatory)

Ok. I'll try to make the best out of it for v5 series. Maybe
it is still not perfect by then, but close...

> 
> Maxime

BR and thanks,
Nikolaus