Re: [PATCH v4 02/10] drm/ingenic: Add support for JZ4780 and HDMI output

From: Paul Cercueil
Date: Tue Sep 28 2021 - 05:35:41 EST

Next message: Joerg Roedel: "Re: [PATCH] iommu/dart: Remove iommu_flush_ops"
Previous message: Arnd Bergmann: "[PATCH] [v2] printk: avoid -Wsometimes-uninitialized warning"
In reply to: H. Nikolaus Schaller: "[PATCH v4 02/10] drm/ingenic: Add support for JZ4780 and HDMI output"
Next in thread: H. Nikolaus Schaller: "Re: [PATCH v4 02/10] drm/ingenic: Add support for JZ4780 and HDMI output"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Nikolaus / Paul,

Le lun., sept. 27 2021 at 18:44:20 +0200, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> a écrit :

From: Paul Boddie <paul@xxxxxxxxxxxxx>

Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.

Tested on MIPS Creator CI20 board.

Signed-off-by: Paul Boddie <paul@xxxxxxxxxxxxx>
Signed-off-by: Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx>
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
---
drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 85 +++++++++++++++++++++--
drivers/gpu/drm/ingenic/ingenic-drm.h | 42 +++++++++++
2 files changed, 122 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index f73522bdacaa..e2df4b085905 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@

#include "ingenic-drm.h"

+#include <linux/bitfield.h>
#include <linux/component.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
u32 addr;
u32 id;
u32 cmd;
+ /* extended hw descriptor for jz4780 */
+ u32 offsize;
+ u32 pagewidth;
+ u32 cpos;
+ u32 dessize;
} __aligned(16);

struct ingenic_dma_hwdescs {
@@ -60,9 +66,11 @@ struct jz_soc_info {
bool needs_dev_clk;
bool has_osd;
bool map_noncoherent;
+ bool use_extended_hwdesc;
unsigned int max_width, max_height;
const u32 *formats_f0, *formats_f1;
unsigned int num_formats_f0, num_formats_f1;
+ unsigned int max_reg;
};

struct ingenic_drm_private_state {
@@ -168,12 +176,11 @@ static bool ingenic_drm_writeable_reg(struct device *dev, unsigned int reg)
}
}

-static const struct regmap_config ingenic_drm_regmap_config = {
+static struct regmap_config ingenic_drm_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,

- .max_register = JZ_REG_LCD_SIZE1,
.writeable_reg = ingenic_drm_writeable_reg,
};

@@ -663,6 +670,37 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
hwdesc->next = dma_hwdesc_addr(priv, next_id);

+ if (priv->soc_info->use_extended_hwdesc) {
+ hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+ /* Extended 8-byte descriptor */
+ hwdesc->cpos = 0;
+ hwdesc->offsize = 0;
+ hwdesc->pagewidth = 0;
+
+ switch (newstate->fb->format->format) {
+ case DRM_FORMAT_XRGB1555:
+ hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+ fallthrough;
+ case DRM_FORMAT_RGB565:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+ break;
+ case DRM_FORMAT_XRGB8888:
+ hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+ break;
+ }
+ hwdesc->cpos |= JZ_LCD_CPOS_PREMULTIPLY_LCD |
+ (JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 <<
+ JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+
+ hwdesc->dessize =
+ (0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+ FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK <<
+ JZ_LCD_DESSIZE_HEIGHT_OFFSET, height - 1) |
+ FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK <<
+ JZ_LCD_DESSIZE_WIDTH_OFFSET, width - 1);
+ }
+
if (drm_atomic_crtc_needs_modeset(crtc_state)) {
fourcc = newstate->fb->format->format;

@@ -694,6 +732,10 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
| JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
}

+ /* set use of the 8-word descriptor and OSD foreground usage. */
+ if (priv->soc_info->use_extended_hwdesc)
+ cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1010,6 +1052,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
struct drm_encoder *encoder;
struct ingenic_drm_bridge *ib;
struct drm_device *drm;
+ struct regmap_config regmap_config;
void __iomem *base;
long parent_rate;
unsigned int i, clone_mask = 0;
@@ -1063,8 +1106,10 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)
return PTR_ERR(base);
}

+ regmap_config = ingenic_drm_regmap_config;
+ regmap_config.max_register = soc_info->max_reg;
priv->map = devm_regmap_init_mmio(dev, base,
- &ingenic_drm_regmap_config);
+ &regmap_config);

Could you split the code that makes .max_reg configurable per-SoC into its own patch?

if (IS_ERR(priv->map)) {
dev_err(dev, "Failed to create regmap\n");
return PTR_ERR(priv->map);
@@ -1274,7 +1319,7 @@ static int ingenic_drm_bind(struct device *dev, bool has_components)

/* Enable OSD if available */
if (soc_info->has_osd)
- regmap_write(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);
+ regmap_set_bits(priv->map, JZ_REG_LCD_OSDC, JZ_LCD_OSDC_OSDEN);

Why?

mutex_init(&priv->clk_mutex);
priv->clock_nb.notifier_call = ingenic_drm_update_pixclk;
@@ -1444,6 +1489,7 @@ static const struct jz_soc_info jz4740_soc_info = {
.formats_f1 = jz4740_formats,
.num_formats_f1 = ARRAY_SIZE(jz4740_formats),
/* JZ4740 has only one plane */
+ .max_reg = JZ_REG_LCD_SIZE1,
};

static const struct jz_soc_info jz4725b_soc_info = {
@@ -1456,6 +1502,7 @@ static const struct jz_soc_info jz4725b_soc_info = {
.num_formats_f1 = ARRAY_SIZE(jz4725b_formats_f1),
.formats_f0 = jz4725b_formats_f0,
.num_formats_f0 = ARRAY_SIZE(jz4725b_formats_f0),
+ .max_reg = JZ_REG_LCD_SIZE1,
};

static const struct jz_soc_info jz4770_soc_info = {
@@ -1468,12 +1515,28 @@ static const struct jz_soc_info jz4770_soc_info = {
.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
.formats_f0 = jz4770_formats_f0,
.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+ .max_reg = JZ_REG_LCD_SIZE1,
+};
+
+static const struct jz_soc_info jz4780_soc_info = {
+ .needs_dev_clk = true,
+ .has_osd = true,
+ .use_extended_hwdesc = true,
+ .max_width = 4096,
+ .max_height = 2048,
+ /* REVISIT: do we support formats different from jz4770? */
+ .formats_f1 = jz4770_formats_f1,
+ .num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+ .formats_f0 = jz4770_formats_f0,
+ .num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+ .max_reg = JZ_REG_LCD_PCFG,
};

static const struct of_device_id ingenic_drm_of_match[] = {
{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+ { .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
@@ -1492,10 +1555,16 @@ static int ingenic_drm_init(void)
{
int err;

+ if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI)) {
+ err = platform_driver_register(ingenic_dw_hdmi_driver_ptr);
+ if (err)
+ return err;
+ }

I don't see why you need to register the ingenic-dw-hdmi driver here. Just register it in the ingenic-dw-hdmi driver.

Cheers,
-Paul

+
if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU)) {
err = platform_driver_register(ingenic_ipu_driver_ptr);
if (err)
- return err;
+ goto err_hdmi_unreg;
}

err = platform_driver_register(&ingenic_drm_driver);
@@ -1507,6 +1576,10 @@ static int ingenic_drm_init(void)
err_ipu_unreg:
if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
platform_driver_unregister(ingenic_ipu_driver_ptr);
+err_hdmi_unreg:
+ if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI))
+ platform_driver_unregister(ingenic_dw_hdmi_driver_ptr);
+
return err;
}
module_init(ingenic_drm_init);
@@ -1515,6 +1588,8 @@ static void ingenic_drm_exit(void)
{
platform_driver_unregister(&ingenic_drm_driver);

+ if (IS_ENABLED(CONFIG_DRM_INGENIC_DW_HDMI))
+ platform_driver_unregister(ingenic_dw_hdmi_driver_ptr);
if (IS_ENABLED(CONFIG_DRM_INGENIC_IPU))
platform_driver_unregister(ingenic_ipu_driver_ptr);
}
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1..13dbc5d25c3b 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@
#define JZ_REG_LCD_XYP1 0x124
#define JZ_REG_LCD_SIZE0 0x128
#define JZ_REG_LCD_SIZE1 0x12c
+#define JZ_REG_LCD_PCFG 0x2c0

#define JZ_LCD_CFG_SLCD BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8 BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN BIT(25)
#define JZ_LCD_CFG_PS_DISABLE BIT(23)
#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
@@ -63,6 +66,7 @@
#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
#define JZ_LCD_CFG_18_BIT BIT(7)
+#define JZ_LCD_CFG_24_BIT BIT(6)
#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))

#define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
@@ -132,6 +136,7 @@
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE BIT(26)

#define JZ_LCD_SYNC_MASK 0x3ff

@@ -153,6 +158,7 @@
#define JZ_LCD_RGBC_EVEN_BGR (0x5 << 0)

#define JZ_LCD_OSDC_OSDEN BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN BIT(2)
#define JZ_LCD_OSDC_F0EN BIT(3)
#define JZ_LCD_OSDC_F1EN BIT(4)

@@ -176,6 +182,41 @@
#define JZ_LCD_SIZE01_WIDTH_LSB 0
#define JZ_LCD_SIZE01_HEIGHT_LSB 16

+#define JZ_LCD_DESSIZE_ALPHA_OFFSET 24
+#define JZ_LCD_DESSIZE_HEIGHT_OFFSET 12
+#define JZ_LCD_DESSIZE_WIDTH_OFFSET 0
+#define JZ_LCD_DESSIZE_HEIGHT_MASK 0xfff
+#define JZ_LCD_DESSIZE_WIDTH_MASK 0xfff
+
+/* TODO: 4,5 and 7 match the above BPP */
+#define JZ_LCD_CPOS_BPP_15_16 (4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24 (5 << 27)
+#define JZ_LCD_CPOS_BPP_30 (7 << 27)
+#define JZ_LCD_CPOS_RGB555 BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET 24
+#define JZ_LCD_CPOS_COEFFICIENT_0 0
+#define JZ_LCD_CPOS_COEFFICIENT_1 1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1 2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1 3
+
+#define JZ_LCD_RGBC_RGB_PADDING BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST BIT(14)
+#define JZ_LCD_RGBC_422 BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4 (0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8 (1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16 (2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32 (3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64 (4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT (5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE (7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET 18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET 9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET 0
+
struct device;
struct drm_plane;
struct drm_plane_state;
@@ -187,5 +228,6 @@ void ingenic_drm_plane_disable(struct device *dev, struct drm_plane *plane);
bool ingenic_drm_map_noncoherent(const struct device *dev);

extern struct platform_driver *ingenic_ipu_driver_ptr;
+extern struct platform_driver *ingenic_dw_hdmi_driver_ptr;

#endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H */
--
2.31.1

Next message: Joerg Roedel: "Re: [PATCH] iommu/dart: Remove iommu_flush_ops"
Previous message: Arnd Bergmann: "[PATCH] [v2] printk: avoid -Wsometimes-uninitialized warning"
In reply to: H. Nikolaus Schaller: "[PATCH v4 02/10] drm/ingenic: Add support for JZ4780 and HDMI output"
Next in thread: H. Nikolaus Schaller: "Re: [PATCH v4 02/10] drm/ingenic: Add support for JZ4780 and HDMI output"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]