Re: [RESEND PATCH v2 4/4] mfd: max14577: Do not enforce (incorrect) interrupt trigger type

[Lee Jones]

On Wed, 02 Jun 2021, Krzysztof Kozlowski wrote:

> From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> 
> Interrupt line can be configured on different hardware in different way,
> even inverted.  Therefore driver should not enforce specific trigger
> type - edge falling - but instead rely on Devicetree to configure it.
> 
> The Maxim 14577/77836 datasheets describe the interrupt line as active
> low with a requirement of acknowledge from the CPU therefore the edge
> falling is not correct.
> 
> The interrupt line is shared between PMIC and charger driver, so using
> level sensitive interrupt is here especially important to avoid races.
> With an edge configuration in case if first PMIC signals interrupt
> followed shortly after by the RTC, the interrupt might not be yet
> cleared/acked thus the second one would not be noticed.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Acked-by: Rob Herring <robh@xxxxxxxxxx>
> 
> ---
> 
> Changes since v1:
> 1. Add Ack
> ---
>  Documentation/devicetree/bindings/mfd/max14577.txt | 4 ++--
>  drivers/mfd/max14577.c                             | 6 +++---
>  2 files changed, 5 insertions(+), 5 deletions(-)

Applied, thanks.

-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog