Re: [PATCH 2/3] ARM: at91: pm: group constants and addresses loading

[Alexandre Belloni]

Hello,

On 28/09/2021 11:42:56+0300, Claudiu Beznea wrote:
> Group constants and addresses loading. This commit prepares the field for
> the next one. Added fixes tag on this commit as the next one will fail
> to apply if backported alone to older kernels.

The proper notation is to use Depends-on: on the next patch.

> 
> Fixes: f0bbf17958e8 ("ARM: at91: pm: add self-refresh support for sama7g5")
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
>  arch/arm/mach-at91/pm_suspend.S | 17 +++++++++--------
>  1 file changed, 9 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
> index cbd61a3bcab1..34f251fdb743 100644
> --- a/arch/arm/mach-at91/pm_suspend.S
> +++ b/arch/arm/mach-at91/pm_suspend.S
> @@ -1014,6 +1014,15 @@ ENTRY(at91_pm_suspend_in_sram)
>  	mov	tmp1, #0
>  	mcr	p15, 0, tmp1, c7, c10, 4
>  
> +	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
> +	str	tmp1, .mckr_offset
> +	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
> +	str	tmp1, .pmc_version
> +	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
> +	str	tmp1, .memtype
> +	ldr	tmp1, [r0, #PM_DATA_MODE]
> +	str	tmp1, .pm_mode
> +
>  	ldr	tmp1, [r0, #PM_DATA_PMC]
>  	str	tmp1, .pmc_base
>  	ldr	tmp1, [r0, #PM_DATA_RAMC0]
> @@ -1022,14 +1031,6 @@ ENTRY(at91_pm_suspend_in_sram)
>  	str	tmp1, .sramc1_base
>  	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
>  	str	tmp1, .sramc_phy_base
> -	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
> -	str	tmp1, .memtype
> -	ldr	tmp1, [r0, #PM_DATA_MODE]
> -	str	tmp1, .pm_mode
> -	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
> -	str	tmp1, .mckr_offset
> -	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
> -	str	tmp1, .pmc_version
>  	/* Both ldrne below are here to preload their address in the TLB */
>  	ldr	tmp1, [r0, #PM_DATA_SHDWC]
>  	str	tmp1, .shdwc
> -- 
> 2.25.1
> 

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com