[PATCH 1/2] ABI: sysfs-mce: add a new ABI file

[Mauro Carvalho Chehab]

Reduce the gap of missing ABIs for Intel servers with MCE
by adding a new ABI file.

The contents of this file comes from:
	Documentation/x86/x86_64/machinecheck.rst

Cc: Andi Kleen <ak@xxxxxxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---

To mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 0/2] at: https://lore.kernel.org/all/cover.1632844726.git.mchehab+huawei@xxxxxxxxxx/

 Documentation/ABI/testing/sysfs-mce | 107 ++++++++++++++++++++++++++++
 1 file changed, 107 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-mce

diff --git a/Documentation/ABI/testing/sysfs-mce b/Documentation/ABI/testing/sysfs-mce
new file mode 100644
index 000000000000..d0f5095da08b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-mce
@@ -0,0 +1,107 @@
+What:		/sys/devices/system/machinecheck/machinecheckX/
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		(X = CPU number)
+
+		Machine checks report internal hardware error conditions
+		detected by the CPU. Uncorrected errors typically cause a
+		machine check (often with panic), corrected ones cause a
+		machine check log entry.
+
+		For more details about the x86 machine check architecture
+		see the Intel and AMD architecture manuals from their
+		developer websites.
+
+		For more details about the architecture
+		see http://one.firstfloor.org/~andi/mce.pdf
+
+		Each CPU has its own directory.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/bank<Y>
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		(Y bank number)
+
+		64bit Hex bitmask enabling/disabling specific subevents for
+		bank Y.
+
+		When a bit in the bitmask is zero then the respective
+		subevent will not be reported.
+
+		By default all events are enabled.
+
+		Note that BIOS maintain another mask to disable specific events
+		per bank.  This is not visible here
+
+What:		/sys/devices/system/machinecheck/machinecheckX/check_interval
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		How often to poll for corrected machine check errors, in
+		seconds (Note output is hexadecimal). Default 5 minutes.
+		When the poller finds MCEs it triggers an exponential speedup
+		(poll more often) on the polling interval.  When the poller
+		stops finding MCEs, it triggers an exponential backoff
+		(poll less often) on the polling interval. The check_interval
+		variable is both the initial and maximum polling interval.
+		0 means no polling for corrected machine check errors
+		(but some corrected errors might be still reported
+		in other ways)
+
+What:		/sys/devices/system/machinecheck/machinecheckX/tolerant
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Tolerance level. When a machine check exception occurs for a
+		non corrected machine check the kernel can take different
+		actions.
+
+		Since machine check exceptions can happen any time it is
+		sometimes risky for the kernel to kill a process because it
+		defies normal kernel locking rules. The tolerance level
+		configures how hard the kernel tries to recover even at some
+		risk of	deadlock. Higher tolerant values trade potentially
+		better uptime with the risk of a crash or even corruption
+		(for tolerant >= 3).
+
+		==  ===========================================================
+		 0  always panic on uncorrected errors, log corrected errors
+		 1  panic or SIGBUS on uncorrected errors, log corrected errors
+		 2  SIGBUS or log uncorrected errors, log corrected errors
+		 3  never panic or SIGBUS, log all errors (for testing only)
+		==  ===========================================================
+
+		Default: 1
+
+		Note this only makes a difference if the CPU allows recovery
+		from a machine check exception. Current x86 CPUs generally
+		do not.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/trigger
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		The entries appear for each CPU, but they are truly shared
+		between all CPUs.
+
+		Program to run when a machine check event is detected.
+		This is an alternative to running mcelog regularly from cron
+		and allows to detect events faster.
+
+What:		/sys/devices/system/machinecheck/machinecheckX/monarch_timeout
+Contact:	Andi Kleen <ak@xxxxxxxxxxxxxxx>
+When:		Feb, 2007
+Description:
+		How long to wait for the other CPUs to machine check too on a
+		exception. 0 to disable waiting for other CPUs.
+
+		Unit: us
+
-- 
2.31.1