Re: [PATCH 2/2] arm64: dts: sc7180: Support Parade ps8640 edp bridge

[Philip Chen]

Hi Stephen,

On Tue, Sep 28, 2021 at 1:58 PM Stephen Boyd <swboyd@xxxxxxxxxxxx> wrote:
>
> Quoting Philip Chen (2021-09-27 18:49:40)
> > diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
> > new file mode 100644
> > index 000000000000..647afb3a7c6a
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi
> > @@ -0,0 +1,105 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Google Trogdor dts fragment for the boards with Parade ps8640 edp bridge
> > + *
> > + * Copyright 2021 Google LLC.
> > + */
> > +
> > +/ {
> > +       pp3300_brij_ps8640: pp3300-brij-ps8640 {
> > +               compatible = "regulator-fixed";
> > +               status = "okay";
> > +               regulator-name = "pp3300_brij_ps8640";
> > +
> > +               regulator-min-microvolt = <3300000>;
> > +               regulator-max-microvolt = <3300000>;
> > +
> > +               gpio = <&tlmm 32 GPIO_ACTIVE_HIGH>;
> > +
> > +               pinctrl-names = "default";
> > +               pinctrl-0 = <&en_pp3300_edp_brij_ps8640>;
> > +
> > +               vin-supply = <&pp3300_a>;
> > +       };
> > +};
> > +
> > +&dsi0_out {
> > +       remote-endpoint = <&ps8640_in>;
> > +};
> > +
> > +&i2c2 {
> > +       ps8640_bridge: edp-bridge@8 {
> > +               compatible = "parade,ps8640";
> > +               reg = <0x8>;
> > +
> > +               powerdown-gpios = <&tlmm 104 GPIO_ACTIVE_LOW>;
> > +               reset-gpios = <&tlmm 11 GPIO_ACTIVE_LOW>;
> > +
> > +               pinctrl-names = "default";
> > +               pinctrl-0 = <&edp_brij_en>, <&edp_brij_ps8640_rst>;
>
> Ah here it is. Ignore my concern on patch #1.
>
> > +
> > +               vdd12-supply = <&pp1200_brij>;
> > +               vdd33-supply = <&pp3300_brij_ps8640>;
> > +
> > +               ports {
> > +                       #address-cells = <1>;
> > +                       #size-cells = <0>;
> > +
> > +                       port@0 {
> > +                               reg = <0>;
> > +                               ps8640_in: endpoint {
> > +                                       remote-endpoint = <&dsi0_out>;
> > +                               };
> > +                       };
> > +
> > +                       port@1 {
> > +                               reg = <1>;
> > +                               ps8640_out: endpoint {
> > +                                       remote-endpoint = <&panel_in_edp>;
> > +                               };
> > +                       };
> > +               };
> > +
> > +               aux_bus: aux-bus {
>
> The parade,ps8640 binding needs an update for aux-bus. Is that somewhere
> in linux-next or on the list?
Thanks for the reminder.
I'll upload a patch to fix the devicetree binding document.
But I'll wait until the support for ps8640 aux-bus is 100% verified by hardware.

>
> > +                       panel: panel {
> > +                               /* Compatible will be filled in per-board */
> > +                               power-supply = <&pp3300_dx_edp>;
> > +                               backlight = <&backlight>;
> > +
> > +                               port {
> > +                                       panel_in_edp: endpoint {
> > +                                               remote-endpoint = <&ps8640_out>;
> > +                                       };
> > +                               };
> > +                       };
> > +               };
> > +       };
> > +};