[smartpqi updates PATCH V2 03/11] smartpqi: capture controller reason codes

From: Don Brace
Date: Tue Sep 28 2021 - 19:54:56 EST

Next message: Don Brace: "[smartpqi updates PATCH V2 01/11] smartpqi: update device removal management"
Previous message: Don Brace: "[smartpqi updates PATCH V2 04/11] smartpqi: update LUN reset handler"
In reply to: john . p . donnelly: "Re: [smartpqi updates PATCH V2 04/11] smartpqi: update LUN reset handler"
Next in thread: john . p . donnelly: "Re: [smartpqi updates PATCH V2 03/11] smartpqi: capture controller reason codes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx>

Store controller reason codes in a controller register for
debugging purposes.

In some rare cases, the driver can halt the controller.
- Add in a reason code on why the controller was halted.
- Store this reason code in a controller register to aid
in debugging the issue.

Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Reviewed-by: Mike McGowen <mike.mcgowen@xxxxxxxxxxxxx>
Signed-off-by: Murthy Bhat <Murthy.Bhat@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
---
drivers/scsi/smartpqi/smartpqi.h | 25 +++++++++++++++--
drivers/scsi/smartpqi/smartpqi_init.c | 40 ++++++++++++++++++---------
drivers/scsi/smartpqi/smartpqi_sis.c | 9 ++++--
drivers/scsi/smartpqi/smartpqi_sis.h | 3 +-
4 files changed, 57 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/smartpqi/smartpqi.h b/drivers/scsi/smartpqi/smartpqi.h
index 70eca203d72f..d66863f8d1cf 100644
--- a/drivers/scsi/smartpqi/smartpqi.h
+++ b/drivers/scsi/smartpqi/smartpqi.h
@@ -82,9 +82,11 @@ struct pqi_ctrl_registers {
__le32 sis_product_identifier; /* B4h */
u8 reserved5[0xbc - (0xb4 + sizeof(__le32))];
__le32 sis_firmware_status; /* BCh */
- u8 reserved6[0x1000 - (0xbc + sizeof(__le32))];
+ u8 reserved6[0xcc - (0xbc + sizeof(__le32))];
+ __le32 sis_ctrl_shutdown_reason_code; /* CCh */
+ u8 reserved7[0x1000 - (0xcc + sizeof(__le32))];
__le32 sis_mailbox[8]; /* 1000h */
- u8 reserved7[0x4000 - (0x1000 + (sizeof(__le32) * 8))];
+ u8 reserved8[0x4000 - (0x1000 + (sizeof(__le32) * 8))];
/*
* The PQI spec states that the PQI registers should be at
* offset 0 from the PCIe BAR 0. However, we can't map
@@ -102,6 +104,21 @@ struct pqi_ctrl_registers {

#define PQI_DEVICE_REGISTERS_OFFSET 0x4000

+/* shutdown reasons for taking the controller offline */
+enum pqi_ctrl_shutdown_reason {
+ PQI_IQ_NOT_DRAINED_TIMEOUT = 1,
+ PQI_LUN_RESET_TIMEOUT = 2,
+ PQI_IO_PENDING_POST_LUN_RESET_TIMEOUT = 3,
+ PQI_NO_HEARTBEAT = 4,
+ PQI_FIRMWARE_KERNEL_NOT_UP = 5,
+ PQI_OFA_RESPONSE_TIMEOUT = 6,
+ PQI_INVALID_REQ_ID = 7,
+ PQI_UNMATCHED_REQ_ID = 8,
+ PQI_IO_PI_OUT_OF_RANGE = 9,
+ PQI_EVENT_PI_OUT_OF_RANGE = 10,
+ PQI_UNEXPECTED_IU_TYPE = 11
+};
+
enum pqi_io_path {
RAID_PATH = 0,
AIO_PATH = 1
@@ -850,7 +867,8 @@ struct pqi_config_table_firmware_features {
#define PQI_FIRMWARE_FEATURE_TMF_IU_TIMEOUT 14
#define PQI_FIRMWARE_FEATURE_RAID_BYPASS_ON_ENCRYPTED_NVME 15
#define PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN 16
-#define PQI_FIRMWARE_FEATURE_MAXIMUM 16
+#define PQI_FIRMWARE_FEATURE_FW_TRIAGE 17
+#define PQI_FIRMWARE_FEATURE_MAXIMUM 17

struct pqi_config_table_debug {
struct pqi_config_table_section_header header;
@@ -1297,6 +1315,7 @@ struct pqi_ctrl_info {
u8 raid_iu_timeout_supported : 1;
u8 tmf_iu_timeout_supported : 1;
u8 unique_wwid_in_report_phys_lun_supported : 1;
+ u8 firmware_triage_supported : 1;
u8 enable_r1_writes : 1;
u8 enable_r5_writes : 1;
u8 enable_r6_writes : 1;
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 5655d240f7a7..b6ac4d607664 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -54,7 +54,8 @@ MODULE_DESCRIPTION("Driver for Microchip Smart Family Controller version "
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL");

-static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info);
+static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
+ enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason);
static void pqi_ctrl_offline_worker(struct work_struct *work);
static int pqi_scan_scsi_devices(struct pqi_ctrl_info *ctrl_info);
static void pqi_scan_start(struct Scsi_Host *shost);
@@ -226,7 +227,7 @@ static inline void pqi_check_ctrl_health(struct pqi_ctrl_info *ctrl_info)
{
if (ctrl_info->controller_online)
if (!sis_is_firmware_running(ctrl_info))
- pqi_take_ctrl_offline(ctrl_info);
+ pqi_take_ctrl_offline(ctrl_info, PQI_FIRMWARE_KERNEL_NOT_UP);
}

static inline bool pqi_is_hba_lunid(u8 *scsi3addr)
@@ -3180,9 +3181,10 @@ static int pqi_interpret_task_management_response(struct pqi_ctrl_info *ctrl_inf
return rc;
}

-static inline void pqi_invalid_response(struct pqi_ctrl_info *ctrl_info)
+static inline void pqi_invalid_response(struct pqi_ctrl_info *ctrl_info,
+ enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
{
- pqi_take_ctrl_offline(ctrl_info);
+ pqi_take_ctrl_offline(ctrl_info, ctrl_shutdown_reason);
}

static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue_group *queue_group)
@@ -3200,7 +3202,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
while (1) {
oq_pi = readl(queue_group->oq_pi);
if (oq_pi >= ctrl_info->num_elements_per_oq) {
- pqi_invalid_response(ctrl_info);
+ pqi_invalid_response(ctrl_info, PQI_IO_PI_OUT_OF_RANGE);
dev_err(&ctrl_info->pci_dev->dev,
"I/O interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
oq_pi, ctrl_info->num_elements_per_oq - 1, oq_ci);
@@ -3215,7 +3217,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue

request_id = get_unaligned_le16(&response->request_id);
if (request_id >= ctrl_info->max_io_slots) {
- pqi_invalid_response(ctrl_info);
+ pqi_invalid_response(ctrl_info, PQI_INVALID_REQ_ID);
dev_err(&ctrl_info->pci_dev->dev,
"request ID in response (%u) out of range (0-%u): producer index: %u consumer index: %u\n",
request_id, ctrl_info->max_io_slots - 1, oq_pi, oq_ci);
@@ -3224,7 +3226,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue

io_request = &ctrl_info->io_request_pool[request_id];
if (atomic_read(&io_request->refcount) == 0) {
- pqi_invalid_response(ctrl_info);
+ pqi_invalid_response(ctrl_info, PQI_UNMATCHED_REQ_ID);
dev_err(&ctrl_info->pci_dev->dev,
"request ID in response (%u) does not match an outstanding I/O request: producer index: %u consumer index: %u\n",
request_id, oq_pi, oq_ci);
@@ -3260,7 +3262,7 @@ static int pqi_process_io_intr(struct pqi_ctrl_info *ctrl_info, struct pqi_queue
pqi_process_io_error(response->header.iu_type, io_request);
break;
default:
- pqi_invalid_response(ctrl_info);
+ pqi_invalid_response(ctrl_info, PQI_UNEXPECTED_IU_TYPE);
dev_err(&ctrl_info->pci_dev->dev,
"unexpected IU type: 0x%x: producer index: %u consumer index: %u\n",
response->header.iu_type, oq_pi, oq_ci);
@@ -3442,7 +3444,7 @@ static void pqi_process_soft_reset(struct pqi_ctrl_info *ctrl_info)
pqi_ofa_free_host_buffer(ctrl_info);
pqi_ctrl_ofa_done(ctrl_info);
pqi_ofa_ctrl_unquiesce(ctrl_info);
- pqi_take_ctrl_offline(ctrl_info);
+ pqi_take_ctrl_offline(ctrl_info, PQI_OFA_RESPONSE_TIMEOUT);
break;
}
}
@@ -3567,7 +3569,7 @@ static void pqi_heartbeat_timer_handler(struct timer_list *t)
dev_err(&ctrl_info->pci_dev->dev,
"no heartbeat detected - last heartbeat count: %u\n",
heartbeat_count);
- pqi_take_ctrl_offline(ctrl_info);
+ pqi_take_ctrl_offline(ctrl_info, PQI_NO_HEARTBEAT);
return;
}
} else {
@@ -3631,7 +3633,7 @@ static int pqi_process_event_intr(struct pqi_ctrl_info *ctrl_info)
while (1) {
oq_pi = readl(event_queue->oq_pi);
if (oq_pi >= PQI_NUM_EVENT_QUEUE_ELEMENTS) {
- pqi_invalid_response(ctrl_info);
+ pqi_invalid_response(ctrl_info, PQI_EVENT_PI_OUT_OF_RANGE);
dev_err(&ctrl_info->pci_dev->dev,
"event interrupt: producer index (%u) out of range (0-%u): consumer index: %u\n",
oq_pi, PQI_NUM_EVENT_QUEUE_ELEMENTS - 1, oq_ci);
@@ -7323,7 +7325,10 @@ static void pqi_ctrl_update_feature_flags(struct pqi_ctrl_info *ctrl_info,
ctrl_info->unique_wwid_in_report_phys_lun_supported =
firmware_feature->enabled;
break;
+ case PQI_FIRMWARE_FEATURE_FW_TRIAGE:
+ ctrl_info->firmware_triage_supported = firmware_feature->enabled;
pqi_save_fw_triage_setting(ctrl_info, firmware_feature->enabled);
+ break;
}

pqi_firmware_feature_status(ctrl_info, firmware_feature);
@@ -7419,6 +7424,11 @@ static struct pqi_firmware_feature pqi_firmware_features[] = {
.feature_bit = PQI_FIRMWARE_FEATURE_UNIQUE_WWID_IN_REPORT_PHYS_LUN,
.feature_status = pqi_ctrl_update_feature_flags,
},
+ {
+ .feature_name = "Firmware Triage",
+ .feature_bit = PQI_FIRMWARE_FEATURE_FW_TRIAGE,
+ .feature_status = pqi_ctrl_update_feature_flags,
+ },
};

static void pqi_process_firmware_features(
@@ -7519,6 +7529,7 @@ static void pqi_ctrl_reset_config(struct pqi_ctrl_info *ctrl_info)
ctrl_info->raid_iu_timeout_supported = false;
ctrl_info->tmf_iu_timeout_supported = false;
ctrl_info->unique_wwid_in_report_phys_lun_supported = false;
+ ctrl_info->firmware_triage_supported = false;
}

static int pqi_process_config_table(struct pqi_ctrl_info *ctrl_info)
@@ -8459,7 +8470,8 @@ static void pqi_ctrl_offline_worker(struct work_struct *work)
pqi_take_ctrl_offline_deferred(ctrl_info);
}

-static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info)
+static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info,
+ enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
{
if (!ctrl_info->controller_online)
return;
@@ -8468,7 +8480,7 @@ static void pqi_take_ctrl_offline(struct pqi_ctrl_info *ctrl_info)
ctrl_info->pqi_mode_enabled = false;
pqi_ctrl_block_requests(ctrl_info);
if (!pqi_disable_ctrl_shutdown)
- sis_shutdown_ctrl(ctrl_info);
+ sis_shutdown_ctrl(ctrl_info, ctrl_shutdown_reason);
pci_disable_device(ctrl_info->pci_dev);
dev_err(&ctrl_info->pci_dev->dev, "controller offline\n");
schedule_work(&ctrl_info->ctrl_offline_work);
@@ -9303,6 +9315,8 @@ static void __attribute__((unused)) verify_structures(void)
sis_product_identifier) != 0xb4);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
sis_firmware_status) != 0xbc);
+ BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
+ sis_ctrl_shutdown_reason_code) != 0xcc);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
sis_mailbox) != 0x1000);
BUILD_BUG_ON(offsetof(struct pqi_ctrl_registers,
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.c b/drivers/scsi/smartpqi/smartpqi_sis.c
index 8acd3a80f582..d66eb8ea161c 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.c
+++ b/drivers/scsi/smartpqi/smartpqi_sis.c
@@ -397,14 +397,17 @@ void sis_enable_intx(struct pqi_ctrl_info *ctrl_info)
sis_set_doorbell_bit(ctrl_info, SIS_ENABLE_INTX);
}

-void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info)
+void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
+ enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason)
{
if (readl(&ctrl_info->registers->sis_firmware_status) &
SIS_CTRL_KERNEL_PANIC)
return;

- writel(SIS_TRIGGER_SHUTDOWN,
- &ctrl_info->registers->sis_host_to_ctrl_doorbell);
+ if (ctrl_info->firmware_triage_supported)
+ writel(ctrl_shutdown_reason, &ctrl_info->registers->sis_ctrl_shutdown_reason_code);
+
+ writel(SIS_TRIGGER_SHUTDOWN, &ctrl_info->registers->sis_host_to_ctrl_doorbell);
}

int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info)
diff --git a/drivers/scsi/smartpqi/smartpqi_sis.h b/drivers/scsi/smartpqi/smartpqi_sis.h
index c1db93054c86..bd92ff49f385 100644
--- a/drivers/scsi/smartpqi/smartpqi_sis.h
+++ b/drivers/scsi/smartpqi/smartpqi_sis.h
@@ -21,7 +21,8 @@ int sis_get_pqi_capabilities(struct pqi_ctrl_info *ctrl_info);
int sis_init_base_struct_addr(struct pqi_ctrl_info *ctrl_info);
void sis_enable_msix(struct pqi_ctrl_info *ctrl_info);
void sis_enable_intx(struct pqi_ctrl_info *ctrl_info);
-void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info);
+void sis_shutdown_ctrl(struct pqi_ctrl_info *ctrl_info,
+ enum pqi_ctrl_shutdown_reason ctrl_shutdown_reason);
int sis_pqi_reset_quiesce(struct pqi_ctrl_info *ctrl_info);
int sis_reenable_sis_mode(struct pqi_ctrl_info *ctrl_info);
void sis_write_driver_scratch(struct pqi_ctrl_info *ctrl_info, u32 value);
--
2.28.0.rc1.9.ge7ae437ac1

Next message: Don Brace: "[smartpqi updates PATCH V2 01/11] smartpqi: update device removal management"
Previous message: Don Brace: "[smartpqi updates PATCH V2 04/11] smartpqi: update LUN reset handler"
In reply to: john . p . donnelly: "Re: [smartpqi updates PATCH V2 04/11] smartpqi: update LUN reset handler"
Next in thread: john . p . donnelly: "Re: [smartpqi updates PATCH V2 03/11] smartpqi: capture controller reason codes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]